2011 Ford F-150 Raptor Truck Bed Sliding Tray

Hey Mark, there isn't a way to use a Bedslide with a gooseneck but I was able to find that there is a way to use a CargoGlide with one if you use the part #CGGN-1 which is something that has to be special ordered from them. At this time we…

Hey Jim, congrats on the new truck. I would strongly advise staying away from the Severe Service Timbren Suspension Enhancement System item #TGMRTT35D. You're really going to feel those when you're driving around without your camper. Those…

Hey George, thanks for reaching out! You will need to add the 2" Spacer Kit #PB73VV Alpha HD Air Bag Suspension Kit #PB85RV if the distance from the bottom of your jounce to the top of the strike plate is more than 7-12", according to…

Hi Duane, Air Springs are better for leveling loads and will typically give you a rougher unloaded ride quality so these might not be the best option for your setup depending on what your intended use is. Air springs are the best option when it comes…

Hey Clarence! That would be great but none of the trailer camera systems are going to pair with vehicle monitors/screens. All of them will require a separate monitor. The Furrion is a really nice system so I do recommend it. Since the Vision S is…

Hey Mike, it is important that you use the included power cable with the Furrion Vision S+ Wireless RV Backup System w/ 1 Camera #FR57AD like the instructions indicate. If this is like a hardwire install I would look for a cigarette lighter to 2-wire…

Hey Dave, thanks for reaching out! The Air Lift LoadLifter 5000 Ultimate Air Helper Springs with Internal Jounce Bumpers #AL88375 is the kit I recommend using, as it will fit with an in-bed hitch and comes with internal jounce bumpers for an added…

Hey Dennis, thanks for reaching out! The Furrion Vision S+ system is what you're looking for as the rear camera will be plug and play like you're wanting. For a single rear camera, you need the Kit #FR57AD, but if you'd like to install a…

Hello Tim, The overall dimensions of the MORryde RV Cargo Slide Tray - 90" x 26" - 2 Way Slide - 60 Percent Extension - 800 lbs #MR87FR is 90" long x 26" wide x 6-5/8" tall, the actual tray dimensions are 88-1/4" long x…

According to BedSlide the Factory Mount Installation Kit for BedSlide S and Classic #BE69WR will not work with any in bed towing packages such as 5th wheel & gooseneck towing packages. This installation kit you mentioned is actually designed to…

Hello Andrew, Well that sounds like quite the fun trip, what state or states will you be traveling through? You're asking a really important question, especially since you're planning a cross-country trip with about 250 pounds of bikes and…

Hi Andrea, The 2022 Ram 2500 Power Wagon comes with a 6-1/2' bed. Speaking from experience when it comes to hauling tools around the 300lb capacity of the Truck Trolley Truck Bed Slide Out Tray #TR87VR would likely not be enough to handle the…