1994 Toyota T100 Pickup Truck Bed Sliding Tray

The Truck Trolley Sliding Truck Bed Tray #TR87VR actually just installs using straps, which is why it has a 300 lb weight rating as opposed to 1,000 + lbs like we see with some of the sliding cargo trays that bolt to the truck bed. The installation…

Truck Trolley test fit the part #TR87VR on the 2023 Ford F-150 and found that it does fit the 5-1/2 foot and 6-1/2 foot beds so it would for sure fit yours. We also had the chance to test fit it on a 2020 model and found that it fit and worked…

Thanks for reaching out, Joe! I recommend using the Rhino-Rack Aero Bar Roof Rack for Camper Shells #Y02-480B which comes with 63" long tracks as well as 54" long crossbars which should give you a little bit of overhang on your…

Yes, the Truck Trolley Sliding Truck Bed Tray #TR87VR does slide out of your truck bed. It has wheels built into the bottom of the tray. This is capable of supporting up to 300lbs and will extend 12-18" beyond your tail gate.

Hey Jaime, yes you can replace your 25-1/4 inch 3,500 lb axle leaf springs with a 5k rated axle spring like the part #e44SR. This will increase the suspension's weight capacity and might make the ride quality a little rougher but it would fit…

Hey Kevin thanks for your question. There is not much downside to going with the 5,000 lb springs instead of the 3,500 lb. A higher rated spring may make the ride a bit more "chunky" at times, since the spring would not flex as…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion…

The trailer hitch that fits your Supercharged 2015 Land Rover Range Rover comes from Stealth Hitches and is available in 2 different variations: - With Accessory Receiver Only #SH49GR - With Accessory Receiver and Towing Kit #SH46GR I really like…

Hey Clayton, the correct Westin hardware kit for the E-Series steps part #23-2315 that fit your 2008 Dodge Ram 2500 quad cab is the part #23-231PK.

The AllTrek 4000 kits provide the best cushioning so if you were to upgrade from your CRE3000 kit to the Alltrek you would see a big improvement. If you have a 35 inch wheelbase you'd want the part #MR29DR or if you have a 33 inch wheelbase…

We do carry the 33" Ark Stabilizer Jack that you are looking for with part #ARK77FR. I was able to track down a few drawings that you should find helpful. These are for the 30" #ARK94FR and the 24" #ARK34FR Stabilizer…

The brackets on the SumoSprings Trailer Helper Springs #SS26MV are 1-1/2" wide so they will fit evenly across the humps on your spring pads. I do not recommend cutting down the spring and you will be able to use these even with only having…