Your coach is hooked up or the trailer's loaded, but the lights aren't working and there is no time to fix wiring. This wireless, battery-powered kit mounts with magnets and gives you stop, turn, and tail lights without a permanent install.Highlights Simple Setup: Plug the transmitter into your vehicles 4-way to send signals wirelessly. Battery Powered: Lamps run on batteries, so no wiring to the trailer is needed. Mounts Fast: Strong magnetic bases stick securely to any trailer or towed vehicle. All Signal Functions: Stop, turn, and tail lights provide everything you need for towing.
Change this light strip's color patterns or play your favorite songs wirelessly using a free smartphone app. You can shorten the weatherproof light strip for a custom fit underneath a smaller RV awning, in a bedroom closet, or on a boat.Or perhaps you need extra light to load and unload gear from a box truck or enclosed trailer after dark? This LED light gives you bright light inside or outside your RV, utility trailer, pontoon boat, service truck, or garage.
Change this light strip's color patterns or play your favorite songs wirelessly using a free smartphone app. You can shorten the weatherproof light strip for a custom fit underneath a smaller RV awning, in a bedroom closet, or on a boat.Or perhaps you need extra light to load and unload gear from a box truck or enclosed trailer after dark? This LED light gives you bright light inside or outside your RV, utility trailer, pontoon boat, service truck, or garage.
Change this light strip's pattern and brightness depending on your needs with the included wireless RF remote control. Weatherproof light strip can be cut to fit anywhere you need it - your RV cargo compartment, bedroom closet, or boat.Wireless RF Remote Control This light strip comes with a wireless RF remote control that lets you operate the 8 light pattern, 10 brightness, and 10 speed options.
This LED light bar is completely wireless, receiving brake and turn signals from a transmitter plugged into your vehicle's 4-pin round. It runs on a rechargeable battery. ... Features: Wirelesslight bar and transmitter Transmitter plugs into tow vehicle's 4-pin socket Bright and efficient LEDs Rechargeable battery 12V DC charging cord included Easy to store Convenient handle Super durable so you can use year-round Durable polyethylene housing won't warp or crack Heavy-duty magnets Rubber coating protects your car from scratches DOT compliant Made in the USA Specs: Light bar dimensions: 23" long x 5" tall x 2-1/2" thick 4-Pin connector dimensions: 5-1/4" long x 2-5/16" wide x 2" thick Magnet base diameter: 3-1/2" Diodes: 17 total Front bar: 11 Turn signal: 2 per signal Side markers: 1 per signal Cord length: 6' Battery life: approximately 4-8 hours 3-Year limited warranty
Stick these bright, efficient LED lights on the back of your car and plug them in - done. This is the easiest way to get brake and turn signals on your car, trailer, or cargo carrier without doing any hardwiring. ... Features: Gets turn and brake signals on your towed car without having to tap into its wiring Eliminates risk of electrical damage to towed car Makes your tow setup safe and legal without a permanent installation Shines brighter and more efficiently than incandescent bulbs Attaches with magnets Includes 2 red LED lights and wiring harness with 4-way flat trailer connector Specs: Light diameter: 4" Wiring harness length: 20' Operating range: 8V - 16V Limited lifetime warranty Will These Magnetic Lights Work On My Vehicle?
Plug this adapter into your existing 7-way when towing a trailer equipped with LED lights so that your vehicle's computer will recognize the trailer's signals. Designed for use on vehicles with Trailer Lamp-Out sensors.Features: Plugs into an existing 7-way socket to provide a new 7-way socket that is able to recognize LED trailerlights Built-in resistors enable LED signals from your trailer to be read by your vehicle's computer No cutting or splicing required Great for use on vehicles with Trailer Lamp-Out sensors, such as Audi, Mercedes-Benz, and Volkswagen vehicles with the factory tow package Spring-loaded dust cover protects terminals from moisture and debris when connector is not in use 1-Year limited warranty
This LED light bar is completely wireless, receiving brake and turn signals from a transmitter plugged into your vehicle's 7-way round. It runs on a rechargeable battery. ... Features: Wirelesslight bar and transmitter Transmitter plugs into tow vehicle's 7-way socket Bright and efficient LEDs Rechargeable battery 12V DC charging cord included Easy to store Convenient handle Super durable so you can use year-round Durable polyethylene housing won't warp or crack Heavy-duty magnets Rubber coating protects your car from scratches DOT compliant Made in the USA Specs: Light bar dimensions: 23" long x 5" tall x 2-1/2" thick Magnet base diameter: 3-1/2" Diodes: 17 total Front bar: 11 Turn signal: 2 per signal Side markers: 1 per signal Charge cord length: 6' 3-Year limited warranty
This LED light bar plugs right into your 12V outlet and needs no hardwiring, while the transmitter plugs into your RV's 7-way socket. Uses a suction cup to attach to your car's back window.Features: Displays tail, brake, and turn signals on your towed car so you can tow safely and legally Receives tow vehicle's signals via wireless transmitter Avoids risk of electrical damage to your car Requires no hardwiring or splicing Light bar plugs into 12-volt outlet in your car Transmitter plugs into RV's 7-way Mounts to your vehicle's rear window with a strong suction cup Includes light bar, transmitter and receiver kit, and mounting kit Made in the USA Specs: Universal fit for all vehicles Requires 12-volt accessory outlet Cord length: 11-1/2' Light bar length: 17" Note: If you have to disconnect your vehicle's battery in order to flat tow, use kit DM83FR (sold separately) to get power to your 12-volt outlet.
Plug in and go: this permanent system gets you smooth, reliable braking with a one-and-done installation. Low-profile components stay out of sight. Includes convenient wireless Coachlink.Hook up safety cables between the vehicles to ensure that the toad does not separate from the motorhome if the tow bar becomes detached. Tow bar wiring syncs your vehicle's signal lights with your motorhome's tail lights, as required by law in most states. Finally, the flat tow braking system - also required in most states - activates the brakes in the toad when you hit the brakes in the RV, making for smoother, safer braking, and preventing wear on your motorhome.
Think of it as a one-time project that pays off on every trip. Once the Shadow 2 braking system is installed under the hood, you hook up, check your monitor, and drive away with the peace of mind that your towed vehicle is stopping safely behind you.Hook up safety cables between the vehicles to ensure that the toad does not separate from the motorhome if the tow bar becomes detached. Tow bar wiring syncs your vehicle's signal lights with your motorhome's tail lights, as required by law in most states. Finally, the flat tow braking system - also required in most states - activates the brakes in the toad when you hit the brakes in the RV, making for smoother, safer braking, and preventing wear on your motorhome.
... Low-profile design keeps it out of sight and out of the way. Includes convenient wireless braking monitor.Hook up safety cables between the vehicles to ensure that the toad does not separate from the motorhome if the tow bar becomes detached. Tow bar wiring syncs your vehicle's signal lights with your motorhome's tail lights, as required by law in most states. Finally, the flat tow braking system - also required in most states - activates the brakes in the toad when you hit the brakes in the RV, making for smoother, safer braking, and preventing wear on your motorhome.
Imagine prepping for your trip and having your braking system ready in less than a minute. With the RVibrake 4, the audio assistant guides you step by step, so there's no fumbling or guesswork, just a quick and reliable setup every time.Hook up safety cables between the vehicles to ensure that the toad does not separate from the motorhome if the tow bar becomes detached. Tow bar wiring syncs your vehicle's signal lights with your motorhome's tail lights, as required by law in most states. Finally, the flat tow braking system - also required in most states - activates the brakes in the toad when you hit the brakes in the RV, making for smoother, safer braking, and preventing wear on your motorhome.
Waterproof trailerlight kit includes 2 combination tail lights that serve 7 functions on trailers under 80" wide. Stud mount with stainless steel hardware and included license plate bracket. 25' wiring harness with 4-pole connector.Features: Square combination tail lights serve 7 functions when properly mounted on trailers under 80" wide Stop, turn, tail, side marker, side reflector, rear reflector, and license plate light Built-in license plate light on driver's side light Sealed, waterproof construction is submersible Durable surface-mount diode (SMD) construction of LED circuit board Better withstands shock and vibration Allows for improved heat distribution LEDs make great replacements for incandescent lights No bulbs to replace No brittle filaments Corrosion-resistant license plate bracket Durable polycarbonate housing and acrylic lens Red lens over clear LEDs Stud mount Stainless steel mounting hardware included 25' Wiring harness with 4-pole connector DOT approved Specs: Application: trailers under 80" wide Driver side: STL39RB Passenger side: STL38RB Light dimensions: 5-1/16" long x 4-9/16" tall x 2-5/8" deep Light face: 4-9/16" x 4-9/16" Distance between mounting studs (center on center): 2" Diodes: Driver's side: 10 Passenger's side: 7 Power draw at 12.8 volts: Stop and turn lights: 0.259 amps Side marker lights: 0.062 amps Lifetime warranty on LEDs Sealed, Waterproof TrailerLight The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
This fast electric A-frame jack has a durable, super-efficient ball screw and a memory function for fast, easy setup. Offers 26" of total lift. Extends 6" in 18.4 seconds with 1,000 lbs of tongue weight.Features: Electric jack lets you lift and lower your A-frame trailer quickly and easily Efficient ball screw makes it fast and easy to position your trailer Ball bearings roll along sturdy, threaded steel rod Powered drive provides quiet operation and eliminates the need for hand cranking Easy-to-access on/off and retract/extend buttons make for simple operation Buttons on front panel will not break off like standard toggle switches Wireless capability - operate jack with included remote control key fob Hitch memory function stores hitch height and weight distribution system height to make hooking up simple Automatically returns your trailer to the position at which you unhooked LED courtesy light on front of jack allows for simple nighttime setup Durable powder coat finish resists corrosion Emergency override allows manual operation in case of power failure Included adapter allows you to easily use your drill to raise and lower the jack Manual crank handle not included Bolt-on installation Specs: Bracket height: Retracted: 10-1/2" Total lift: 26" Screw travel: 21" Drop leg travel: 5" Travel speed (w/ 1,000-lb tongue weight): Extends 6" in 18.4 seconds Retracts 6" in 18.7 seconds Lift capacity: 5,500 lbs Outer tube diameter: 2-1/4" Footplate diameter: 7" Motor attributes: 12 Volt 2-Year warranty 10-Year warranty when registered within 90 days How to Determine the Lift Capacity You Need in a Jack A trailer jack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball.
Complete the factory prep package on your 2021 or newer Freightliner chassis motorhome so you can flat tow your vehicle with the Air Force One supplemental braking system. Includes all needed components and the convenient wireless Coachlink monitor.Hook up safety cables between the vehicles to ensure that the toad does not separate from the motorhome if the tow bar becomes detached. Tow bar wiring syncs your vehicle's signal lights with your motorhome's tail lights, as required by law in most states. Finally, the flat tow braking system - also required in most states - activates the brakes in the toad when you hit the brakes in the RV, making for smoother, safer braking, and preventing wear on your motorhome.
Complete the factory prep package on your 2020 and newer Tiffin chassis motorhome so you can flat tow your vehicle with the Air Force One supplemental braking system. Includes all needed components and the convenient wireless Coachlink monitor.Hook up safety cables between the vehicles to ensure that the toad does not separate from the motorhome if the tow bar becomes detached. Tow bar wiring syncs your vehicle's signal lights with your motorhome's tail lights, as required by law in most states. Finally, the flat tow braking system - also required in most states - activates the brakes in the toad when you hit the brakes in the RV, making for smoother, safer braking, and preventing wear on your motorhome.
Complete the Safe Haul factory prep package on your 2019 or newer Spartan motorhome so you can flat tow your vehicle with the Air Force One supplemental braking system. Includes an air jumper hose with the Safe Haul-specific fitting.This indicator, however, connects directly to a reed switch on the actuator so it only lights up when the pedal is depressed. If there's a strong glare on your toad's windshield, the LED light strip might be hard to see.
Get safe, smooth braking for your towed car with this truly proportional braking system. Car slows perfectly in sync with your RV. Installs permanently so you can just plug in and go. Low-profile design keeps it out of sight and out of the way.This indicator, however, connects directly to a reed switch on the actuator so it only lights up when the pedal is depressed. If there's a strong glare on your toad's windshield, the LED light strip might be hard to see.
Plug in and go: this permanent system gets you smooth, reliable braking with a one-and-done installation. Low-profile components designed to stay out of sight.But unless you have a system that's monitoring your vehicle, you won't know it until the damage is already done. This braking monitor connects directly to your toad's brake light switch so it only lights up when the pedal is depressed and a signal is sent to the brake lights. If there's a strong glare on your toad's windshield, the LED light strip might be hard to see.
Need a complete lighting setup for your trailer? This kit includes everything required for trailers under 80" wide, making it easy to get fully equipped and compliant. ... Features: Trailerlight kit designed to provide complete lighting for trailers under 80" wide Includes tail lights, side marker lights, wiring harness, and license bracket Provides all required lighting and reflectors for DOT compliance 20&' Trailer harness allows full trailer connection License bracket made of corrosion-free black plastic that flexes on impact Mounting hardware and installation instructions included Easy installation for complete setup Includes 1 complete trailerlight kit Specs: Application: Trailers under 80" wide Tail light dimensions: 4-3/4" x 4-1/2" Harness length: 20' Light colors: Red, white, amber
Avoid damage to your towed car by ensuring that your supplemental braking system is properly positioned and working effectively. Kit activates your RV monitoring system to alert you when the brakes of your towed car are being applied.Features: Activates motorhome brake-monitoring system whenever brake pedal in towed car is applied Ensures that the supplemental braking system is functioning properly Works great for any application that does not have a tow position in the ignition Compatible with any vehicle that has a brake pedal and any supplemental braking system that presses the brake pedal Installs quickly and easily Mounts beneath dash on brake pedal arm Connects with just 3 wires - power, ground, and brake light connection 12 Volts Made in the USA By tapping into your towed car's brake-light switch, this kit allows your RV's monitoring system to alert you whenever the brake pedal of your towed car is being applied.
8-1/16" x 2-7/8" Rectangle. Waterproof lights act as brake, tail, turn, side marker, side reflex, rear clearance, rear reflex, and license plate light for trailers wider than 80". ... Each circuit board is sealed, which means that water will not damage the diodes or circuit board. Combination Lights for Trailers Over 80" Wide If a trailer is 80" or wider at its widest point, then it requires rear clearance lights in addition to basic trailerlights.
7-9/16" x 3-5/16" Oval. Waterproof LED trailer tail lights function as stop, turn, and tail signal lights when properly mounted. Durable polycarbonate housing and lens. Reccessed mount with grommet. ... These lights will extend into the mounting surface and require that a hole be cut into your trailer.
Filters
