This swivel jack pivots up for travel and down for use. Built-in grease zerk allows for simple greasing. Retracted height is 15-5/8". Extended height is 31-1/8". Weld-on pipemount included. diameter: 2" Footplate dimensions: 7-7/8" long x 5-7/8" wide Pipemount diameter: Male mountwelded on jack: Inner: 2" Outer: 2-1/2" Female mount to weld on to trailer: Inner
This swivel jack pivots up for travel and down for use. Built-in grease zerk allows for simple greasing. Retracted height is 15-5/8". Extended height is 31-1/8". Weld-on pipemount included. with included male pipemount Specs: Bracket height (from bottom of foot to center of pipemount): 15-5/8" Retracted 31-1/8" Extended Travel: 15-1/2" Outer tube diameter: 2-1/4" Inner tube
This swivel jack pivots up for travel and down for use. Built-in grease zerk allows for simple greasing. Retracted height is 11". Extended height is 21-3/4". Weld-on pipemount included. with included male pipemount Specs: Bracket height (from bottom of foot to center of pipemount): 11" Retracted 21-3/4" Extended Travel: 10-3/4" Outer tube diameter: 2-1/4" Inner tube
This fixed-leg, swivel jack pivots up for travel and down for use. Square design provides superior side-load support. Jack has a retracted height of 15-3/4" and an extended height of 31". ... Weld-on installation Pipemount (included) is required for installation Specs: Bracket height (from bottom of foot to center of pipemount): 15-3/4" Retracted 31" Extended Travel: 15-1/4"
This swivel jack pivots up for travel and down for use. Built-in grease zerk allows for simple greasing. Retracted height is 15-1/4". Extended height is 30-1/8". Weld-on pipemount included. with included male pipemount Specs: Bracket height (from bottom of foot to center of pipemount): 15-1/4" Retracted 30-1/8" Extended Travel: 14-7/8" Outer tube diameter: 2-1/4" Inner tube
Included weld-on pipemount lets you pivot jack up for travel and down for use. Retracted height is 14-1/2". Extended height is 29-7/8". Drop leg offers 13-1/2" of lift on top ... Welded-on footplate minimizes sinking in soft ground Effortless greasing with built-in grease zerk Weld-on installation with included female pipemount Specs: Jack height (from bottom of foot to center
You have it right so far, the 4-way connector is just as you have stated. Remember that Yellow has a L in it so that is the left side brake/turn signal and green has a R in it so that is the right side brake/turn signal. The colors for wiring a…
I do have a way for you to install a 7-way trailer connector on your 2012 Ford F-150 but the plug in the photo you attached does not have all of the circuits needed for a 7-way trailer connector so there is not one that plugs directly into this.…
We have actually spoken with Ventline regarding your model AS-13 M-VD0449 in the past and they have confirmed that the correct replacement cover is the part #BVD0449-A03 in Smoke or #BVD0449-A01 in White. The cover measures 14 inches x 14 inches…
I didn't receive your photos, but the manner in which you attach the e-track to your trailer deck will completely depend on what the deck is constructed of and where exactly on the deck you'll be placing the e-track. Without knowing…
As long as a qualified welder is used, a Safety Chain Attachment Loop like part #E950 could be welded to the receiver as shown in the photo I provided. Having an amateur welder weld it could result in the hitch being weakened. This would be the…
The 60/40 rule is a great guideline for setting up axle placement on a trailer. But in reality the goal is to place the axles where the trailer will have 10-15 percent of the total trailer weight as tongue weight. The distance you would need to…
Yes, the Torflex Lift Kit #K71-724-02 is compatible with your #11 Torflex axle. The note about the 3" high profile bracket is corresponding to the brackets on the axle and not the Trailer Hanger #DX57FR. Your brackets appear to be 3-3/4"…
Some different brand names of trailer breakaway kits do originate from a common source, and this is also true for items like jacks, landing gear and steps. There really is not a lot to distinguish one from another, since their component parts are…
I am not entirely sure I understand your question. In regards to a breakaway system, the switch needs to have a separate battery for power according to most state regulations. You will need to check with your state's DOT but it is safe to assume…
There is a spare tire carrier that will work for you, the CE Smith Offset Spare Tire Carrier #CE27310G. This carrier fits trailer frames that are up to 3-1/2" wide x 4" tall and holds 4 and 5 lug trailer wheels (4 on 4" as well as 5 on…
The most common spare tire carrier we recommend for horse trailers is the part #413200. This carrier can get welded on to your trailer basically wherever you need it to be. I attached a review video for you to check out as well.
In order to mount the Brophy Recessed Trailer Tie-Down D-Ring #RR05, you will need a hole that is 3-3/8 inches in diameter. We recommend you use the backing plate system if you are not attaching this to either a trailer framer or trailer with a steel…
This swivel jack pivots up for travel and down for use. Retracted height is 16". Extended height is 31-1/4". Weld-on pipemount included. powder coat Inner tube and footplate have rust-resistant clear zinc finish Welded-on footplate minimizes sinking in soft ground Weld-on installation with included male pipemount Specs: Bracket height
This fixed-leg, swivel jack pivots up for travel and down for use. Square design provides superior side-load support. Jack has a retracted height of 14-7/8" and an extended height ... with built-in grease zerk Weld-on installation Specs: Bracket height (from bottom of foot to center of pipemount): 14-7/8" Retracted 30-3/8" Extended Travel: 15-1/2" Outer tube width: 2-1/4"
... height is 21-3/4". Weld-on pipemount included. Welded-on footplate minimizes sinking in soft ground Effortless greasing with built-in grease zerk Weld-on installation with included male pipemount Specs: Bracket height (from bottom of foot to center
... Extended height is 31". Weld-on pipemount included. Welded-on footplate minimizes sinking in soft ground Effortless greasing with built-in grease zerk Weld-on installation with included male pipemount Specs: Bracket height (from bottom of foot to center
This swivel jack pivots up for travel and down for use. Built-in grease zerk allows for simple greasing. Retracted height is 10-3/8". Extended height is 20-5/8". Weld-on pipemount included. with included male pipemount Specs: Bracket height (from bottom of foot to center of pipemount): 10-3/8" Retracted 20-5/8" Extended Travel: 10-1/4" Outer tube diameter: 2-1/4" Inner tube
This swivel jack pivots up for travel and down for use. Built-in grease zerk allows for simple greasing. Retracted height is 10-1/4". Extended height is 20-7/8". Weld-on pipemount included. with included male pipemount Specs: Bracket height (from bottom of foot to center of pipemount): 11-1/2" Retracted 21-1/2" Extended Travel: 10" Outer tube diameter: 2-1/4" Inner tube
... Extended height is 31". Weld-on pipemount included. Welded-on footplate minimizes sinking in soft ground Effortless greasing with built-in grease zerk Weld-on installation with included male pipemount Specs: Bracket height (from bottom of foot to center
Weld-on, pipe-mount swivel jack pivots up for travel, down for use. Square design provides side-load support. Retracted height is 14-1/2". Extended height is 29-1/2". Drop leg offers ... and footplate for corrosion resistance Welded-on footplate minimizes sinking in soft ground Effortless greasing with built-in grease zerk Weld-on installation with included female pipemount Specs: Jack height
This swivel jack pivots up for travel and down for use. Built-in grease zerk allows for simple greasing. Retracted height is 10-1/4". Extended height is 20-1/4". Weld-on pipemount included. with included male pipemount Specs: Bracket height (from bottom of foot to center of pipemount): 10-1/4" Retracted 20-1/4" Extended Travel: 10" Outer tube diameter: 2-1/4" Inner tube
Weld-on, pipe-mount swivel jack pivots up for travel, down for use. Has 10" of travel, a 2,000-lb lift capacity, and includes a footplate. with clip holds jack in place Sidewind handle has zinc finished for attractive look and rust resistance Welded-on footplate minimizes sinking in soft ground Weld-on installation with included male pipemount
Footplate, weld-on mount and pull pin are included with this round swivel jack. Ideal for agricultural and commercial uses. Jack has 11-3/16" retracted height and measures 4" from mounting ... handle has smooth, ergonomic design for easy cranking Outer tube has black paint finish Inner tube is zinc plated Weld-on pipemount and standard footplate included Specs: Bracket height: 11-3/16"
Footplate and 5/8" diameter pin are included with this round, swivel-mountjack. Ideal for agricultural and commercial uses. Jack has 15-3/8" retracted height and measures 6-3/8" from ... Inner tube is zinc plated Weld-on pipemount and standard footplate included Specs: Bracket height: 15-3/8" Retracted 30-3/8" Extended Lift: 15" Clearance: 6-3/8" from mounting bracket
Footplate, weld-on mount and pull pin are included with this round swivel jack. Ideal for agricultural and commercial uses. Jack has 10-1/2" retracted height and measures 6-1/4" from ... handle has smooth, ergonomic design for easy cranking Outer tube has black paint finish Inner tube is zinc plated Weld-on pipemount and standard footplate included Specs: Bracket height: 10-1/2"
Drop-leg jack with heavy-duty footplate base and swivel mount offers superior side-load strength in a compact package. Jack has 12-5/8" retracted height and measures 10-1/4" from mounting ... : 12-5/8" Retracted 41-3/16" Extended Total lift: 28-1/2" Travel: 15" Drop leg: 13-1/2" Clearance: 10-1/4" from mounting bracket to top of jack Outside diameter of the outside tube
Footplate, weld-on mount and pull pin are included with this round swivel jack. Ideal for agricultural and commercial uses. Jack has 14-3/4" retracted height and measures 10" from mounting ... handle has smooth, ergonomic design for easy cranking Outer tube has black paint finish Inner tube is zinc plated Weld-on pipemount and standard footplate included Specs: Bracket height: 14-3/4"
Fixed leg, square jack with swivel mount offers increased side-load strength and durability. Jack has 15-1/8" retracted height and measures 9-1/4" from mounting bracket to top, excluding ... tube Sidewind handle has smooth, ergonomic design for easy cranking Fixed-leg jack easily swivels into position Round pipemount and standard footplate included ASABE compliant Specs: Bracket height
Footplate, weld-on mount and pull pin are included with this round swivel jack. Ideal for agricultural and commercial uses. Jack has 14-3/8" retracted height and measures 12-1/4" from ... handle has smooth, ergonomic design for easy cranking Outer tube has black paint finish Inner tube is zinc plated Weld-on pipemount and standard footplate included Specs: Bracket height: 14-3/8"
Footplate, weld-on mount and pull pin are included with this round swivel jack. Ideal for agricultural and commercial uses. Jack has 14-1/2" retracted height and measures 10" from mounting ... handle has smooth, ergonomic design for easy cranking Outer tube has black paint finish Inner tube is zinc plated Weld-on pipemount and standard footplate included Specs: Bracket height: 14-1/2"
In these days of customer "no service" I am usually disapointed when doing business with people I don't know. It was refreshing doing business with you. I'm impressed!
Filter Results
