Automatically level and stabilize your travel trailer with this electronic leveling system. 5 Precise, motorized jacks can be operated by the included control panel or via your smart device (if RV has Wi-Fi and factory-installed OneControl system).There are also indicator lights that let you know what functions are being performed. OneControl Compatibility OneControl technology lets you control and monitor the Ground Control TT with your smartphone or tablet, as long as your trailer or RV is equipped with the factory-installed OneControl system and has Wi-Fi access.
This standard, RV-style, 7-pole connector provides a secure connection between your trailer and tow vehicle. Black plastic construction prevents rusting, enhances appearance and makes plug removal a snap.Features: Standard, 7-pole plug connects trailer to socket on tow vehicle Black plastic construction Eliminates rusting Enhances appearance Prevents difficulty in plug removal Non-corroding, shock-resistant interior design Terminal reinforcer dams eliminate shorting out Prevent contact from spreading Center pin accepts up to 8-gauge wire Vinyl inserts keep out dirt and moisture Dual grips Promote easy removal of plug from socket Safety latch Ensures connector is plugged into socket Color-coded to RVI standards Specs: Wire gauges: Red, brown, green, and yellow: 14 gauge Blue: 12 gauge White and black: 10 gauge Wiring configuration: Blue: electric brake Green: tail lights Red: left turn signal and brakes Brown: right turn signal and brakes Yellow: auxiliary and reverse lights Black: battery White: ground wire 1-Year warranty 12-706 Pollak Black Plastic, 7-Way, RV-Style Trailer Connector - Trailer End Replaces 30305; 118021
Made in the USA with a wear-resistant, self-lubricating lining, this surge actuator will work smoothly for years to come. EZ-Latch coupler ensures you'll always have a strong, secure connection. Zinc plating makes it great for boat trailers.Just center your coupler over the hitch ball, and lower your trailer tongue as you normally would. As the coupler's socket slowly accepts the hitch ball, you'll see the latch rise. Keep lowering your trailer tongue until you hear the metalic clink .
This complete kit includes everything you need to correctly display your RV's brake and turn signals on your vehicle tail lights. Includes coiled 7-way to 6-way adapter cable and 6-way car-side socket.
This adapter plugs into your vehicle's 7-way, round-pin receptacle to adapt it for use with a trailer-end, 7-way, RV-style plug. The 7-way flat receptacle includes a hinged cover to keep dirt and moisture out of the connection.Features: Adapter converts your 7-way, round-pin vehicle-end connector for use with a 7-way, RV-style trailer-end connector Lets you tow a trailer with a 7-way blade plug Works with any RV-style, 7-way plug Connects ground, left turn, right turn and stop circuits Round, floating, solid brass pins in plug Ensure minimum voltage drop Align easily for maximum contact Spring-loaded, hinged door on socket to protect the interior from dirt and moisture Collar with 4 mounting holes lets you mount the socket to your bumper Plug is constructed of glass-filled nylon Socket is constructed of high-impact, ABS thermoplastic Specs: Overall length: 14-1/2" Length between plug and socket: 7-1/2" Wire configuration: White: ground return Black: clearance, side marker and identification lights Yellow: left turn signal and hazard signal Red: stop lights and anti-lock devices Green: right turn signal and hazard lights Brown: tail light, rear clearance marker and license plate light Blue: auxiliary circuit/ABS power Wire gauge: White: 8 Red, blue: 10 Black, yellow, green, brown: 12 1-Year limited warranty Note: If your 7-round plug is wired separately (brake light and turn signals on different wires), this adapter won't work.
Plug this adapter into your existing 7-way when towing a trailer equipped with LED lights so that your vehicle's computer will recognize the trailer's signals. Designed for use on vehicles with Trailer Lamp-Out sensors.Features: Plugs into an existing 7-way socket to provide a new 7-way socket that is able to recognize LED trailerlights Built-in resistors enable LED signals from your trailer to be read by your vehicle's computer No cutting or splicing required Great for use on vehicles with Trailer Lamp-Out sensors, such as Audi, Mercedes-Benz, and Volkswagen vehicles with the factory tow package Spring-loaded dust cover protects terminals from moisture and debris when connector is not in use 1-Year limited warranty
Establish a secure connection between your towing vehicle and trailer with this 7-pole, RV blade-style socket. Black plastic socket has non-corroding, shock-resistant interior design that eliminates shorting out and is color-coded to RVI standards.Features: Standard, 7-pole, RV blade-style socket connects tow vehicle to trailer Black plastic construction Eliminates rusting Enhances appearance Prevents difficulty in plug removal Non-corroding, shock-resistant interior design Terminal reinforcer dams eliminate shorting out Prevent contact from spreading Center pins accepts up to 8-gauge wire Vinyl inserts keep out dirt and moisture Spring-loaded lid with stainless steel spring and rubber gasket Prevents leaks when closed Drain slot has angled design for drainage Secures trailer-end connector in socket Safety latch Ensures connector is plugged into socket Color-coded to RVI standards Specs: Wiring configuration: Color - circuit - recommended wire gauge: White - Ground - 10 gauge Blue - Electric Brake - 12 gauge Green - Tail, License, and Running Lights - 14 gauge Black - Battery Charge - 10 gauge Red - Stop and Left-Hand Turn Signal - 14 gauge Brown - Stop and Right-Hand Turn Signal - 14 gauge Yellow - Auxiliary Circuit - 14 gauge Distance between mounting holes center to center: 2-1/4" wide x 1-1/2" tall 1-Year limited warranty
Great for cars and trailers with either LED or incandescent bulbs, this kit converts your vehicle's lighting system to match your trailer's. It includes a 4-way flat, wire taps, and a power wire that pulls power directly from your battery.Features: Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights Compatible with 5-pole, 6-pole, and 7-pole adapters (sold separately) Ensures that your vehicle's wiring matches that of your trailer Avoids overloading your vehicle's electrical system by connecting directly to your battery Power wire and fuse kit included Designed with safety in mind Guards against electrical shorts, mis-wire situations, and electrostatic discharge Splices into your vehicle's wiring with the included quick-splice connectors Color-coded wires ease installation Resists damage from shock and vibration for superior operation on rough roads Circuit board is constructed using surface-mount technology (SMT), an improvement over through-hole construction Includes durable, molded-rubber, female output socket with protective dust cover Specs: Application: Vehicles with 2-wire or 3-wire electrical systems Trailers and vehicles with LED or incandescent lights 4-Way harness length: 58" Splice-in wire length: 17" Ground wire length: 17" Power wire length: 20' Maximum amperage: Turn lights and brake lights: 3 amps per circuit Tail lights: 3 amps per circuit Wire gauge: Power wire: 12 Limited 1-year warranty Do I Need A Tail Light Converter?
For years, this UFP-style surge brake actuator has been the gold standard for boat trailers. Its weld-on, low-profile design looks sleek on your trailer, and the electric lockout lets you back up without locking up your disc brakes. Made in the USA.The solenoid on this electric lockout ties into the reverse light circuit on your 5-pin, 6-pin, or 7-pole connector so that your disc brakes won't engage when your reverse lights come on. This can make backing up a boat trailer so much easier than using a manual lockout because everything is automatic.
4-1/4" Round. Weatherproof, incandescent trailer tail light serves as a stop, tail, and turn signal light. Wedge-base socket protects premium bulb for long life. Tongue-and-groove lens seal. ... Features: Combination trailer tail light serves 3 functions when properly mounted Stop light Tail light Turn signal light Tongue-and-groove lens seals light to protect electrical connections against water and dust Premium bulb rated for up to 15,000 hours Wedge-base socket prevents premature bulb failure Durable polycarbonate housing Red lens over incandescent bulb Compatible with 12V DC systems Recessed mount with included grommet 3-Wire plug makes trailer connections DOT compliant Made in the USA Specs: Dimensions: 4-1/4" diameter x 2-1/16" thick Bulb type: incandescent 1-Year limited warranty Recessed-Mount Light Recessed-mount trailerlights install with a grommet, which is often sold separately.
This complete kit includes everything you need to carry your RV's brake and turn signals to your towed car's tail lights. Diodes prevent electrical feedback. The hybrid coiled/straight adapter cord is ideal for tow bars with channel guides.
Replace the 7-way, blade-style connector on your trailer with this plug and lead to sync the brake lights and turn signals. Cable hardwires to your existing trailer wiring. Curved grips make it easy to disconnect from your vehicle's 7-way socket.
For years, this UFP-style surge brake actuator has been the gold standard for boat trailers. Its weld-on, low-profile design looks sleek on your trailer. Manual lockout pin and fill cap sold separately. Made in the USA.The solenoid on this electric lockout ties into the reverse light circuit on your 5-pin, 6-pin, or 7-pole connector so that your disc brakes won't engage when your reverse lights come on. This can make backing up a boat trailer so much easier than using a manual lockout because everything is automatic.
Switch-operated jack has 18" of screw travel and a 4-1/2" drop leg. Retracted height is 9" and extended height is 27". 7-Way plug makes setup easy. Extends 6" in 29 seconds with 1,000 lbs of tongue weight.Features: Electric jack lets you raise and lower your A-frame trailer quickly and easily 7-Way RV-style plug pulls power from your vehicle's trailer connector No need to manually wire for power Weather-sealed toggle switch on underside of housing extends and retracts jack for easy operation 2 LED lights on either side make it simple to set up your camper at night Red button on back of jack turns lights on Convenient built-in leveling gauge lets you see if your setup is level Integrated circuit breaker prevents motor damage Emergency crank (included) allows you to manually operate jack if needed Crank inserts into socket beneath level Drop leg allows for increased lift and saves time when raising or lowering Sturdy carbon steel construction Black powder coated outer tube Zinc-finished inner tube and footplate resist corrosion Easy bolt-on installation Specs: Bracket height: Retracted: 9" Extended: 27" Total lift: 22-1/2" Screw travel: 18" Drop leg travel: 4-1/2" Overall height when full extended: 31-1/2" Travel speed (w/ 1,000-lb tongue weight): Extends 6" in 29 seconds Retracts 6" in 26.4 seconds Footplate diameter: 5-1/2" Outer tube diameter: 2-1/2" Clearance (bracket to top of level gauge): 19-1/2" Lift capacity: 3,500 lbs Motor: 12V Power cord length: 4' 1-Year warranty How to Determine the Lift Capacity You Need in a Jack A trailer jack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball.
Electric jack has a drop leg for 5-1/2" of lift on top of the 18" of screw travel. Large footplate minimizes sinking. Jack can be welded or bolted onto any A-frame trailer.Features: Tongue jack positions quickly and easily 12V Motor powers jack, eliminating need for hand cranking Built-in, water-resistant toggle switch for easy operation Integrated circuit breaker prevents motor damage All-steel gears are strong and durable Drop leg provides an extra 5-1/2" of lift for added clearance Dual side lights make it simple to set up your camper at night Emergency, ratchet-style crank socket 9/16" Deep well socket inserts into end of drive collar - ratchet clockwise to retract, counterclockwise to extend Grease access hole on the lower stem assembly allows access to grease the threaded rod which leads to a longer jack life Easy bolt-on or weld-on installation for A-frame trailers Hardware included Mounting holes fit 2" or 2-1/4" spacing Round footplate included Die-cast aluminum cap resists corrosion Sturdy steel construction with black powder coat finish Specs: Bracket height: 9-1/4" Retracted with drop leg retracted 27-1/4" Extended with drop leg retracted 32-3/4 Extended with drop leg extended Total lift: 23-1/2" Screw travel: 18" Drop leg travel: 5-1/2" Lift capacity: 3,500 lbs Outer tube diameter: 2-1/4" Inner tube diameter: 2" Footplate diameter: 6" Distance between mounting holes center to center: 3" 5-Year warranty How to Determine the Lift Capacity You Need in a Jack A trailer jack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball.
You're swapping out a factory socket and want a tight fit that won't rattle loose. This twist-mount connector snaps into your trucks factory knockout and gives you both 7-way and 4-flat outputs. You wire it once and trust it's gonna hold.Highlights Dual Trailer Ports: 7-way blade and 4-flat sockets in one connector. Twist Mount Design: Locks into factory knockout for a tight, secure fit.
Upgrade the 7-way connection on your vehicle and trailer with this complete kit. Built-in magnets create tight connection. O-rings make a watertight seal. Face-to-face contacts mean no bent or broken terminals. Includes plug holder and dummy plug.Features: Trailer connectors install at the back of your vehicle and at the front of your trailer to power your trailer's signal lights Powerful magnet in socket joins with magnet in plug to keep connection secure Plugs stay tightly connected, despite the bumps and vibrations common with towing Face-to-face electrical contacts - no pins or blades to bend or break Eliminates concerns about electrical arcing and abraded pins Contacts are easy to clean when necessary Ideal for marine applications Double silicon O-ring on plug creates watertight seal with socket to keep out moisture and debris Water-block powder in cable keeps moisture away from wiring Plug holder and dummy plug keep terminals from becoming exposed when connectors are not in use Quick and easy installation Plug wiring harness into vehicle - no cutting or splicing of wires Hardwire trailer-end plug to existing trailer wiring Vehicle-end connector fits into factory socket mounting location on most newer vehicles Standard mounting bracket included Adapter brackets (sold separately) also available Made in the USA Specs: Trailer-end cable length: 4' Vehicle-end wiring harness length: 2' Wiring configuration: White: ground Red: left turn Brown: right turn Black: auxiliary power Green: tail lights Yellow: reverse lights Blue: brakes Wire gauges: 14 Gauge: red, brown, green, and yellow 12 Gauge: blue 10 Gauge: white and black Limited lifetime warranty These connectors give you the functionality of a 7-way connection, but without any pins or blades to bend or break.
8-1/16" x 2-7/8" Rectangle. Waterproof incandescent light acts as brake, tail, turn, side marker, side reflector, rear clearance, and rear reflector for trailers over 80" wide. Stud mount - includes hardware.The circuit board is sealed, which means that water will not damage the diodes or circuit board. Combination Lights for Trailers Over 80" Wide If a trailer is 80" or wider at its widest point, then it requires rear clearance lights in addition to basic trailerlights.
5-5/16" x 4-9/16" Square. Incandescent trailer tail light serves 6 functions on trailers under 80" wide: brake, tail, turn, side marker, side reflector, and rear reflector. ... Features: Trailer tail light serves 6 functions on trailers less than 80" wide Stop, Turn, Tail, Rear Reflex, Side Marker, and Side Reflex Built-in reflex reflectors remove the need for a separate reflector Shock-proof socket protects the bulb Incandescent bulb can be easily replaced Red lens over 2 bulbs Durable polycarbonate housing and acrylic lens Stud mounts on trailer with included studs Quick connect wiring - simply insert stripped wire into holes for a secure connection Light grounds through mounting studs Specs: Configuration: passenger side Driver side: ST9RB (sold separately) Dimensions: 5-5/16" long x 4-9/16" wide x 2-7/8" deep Distance between mounting studs (center on center): 2" Power draw at 12.8V: Stop/turn: 2.5 amps Tail: 1 amp 3-Year warranty Manufacturer Cross Reference Light will work as an exact replacement for: Uni Bond # TL4400 Wesbar # 3060 Graote # 52302 Peterson # 440
You're lining up the trailer in the driveway when you realize the plug doesn't match. No time to rewire. You mount the bracket, snap in the adapter, and the lights fire up. Quick install, solid connection, and you're back on schedule.Features to know about Quick Connection for Mixed Wiring Setups This plug-and-play adapter converts a 7-way blade socket to a 4-way flat trailer plug, allowing you to tow trailers with different wiring configurations. The single housing design plugs into your vehicles electrical socket and requires no wiring.
Heavy-duty but easy to use: the electric lockout keeps your trailer's disc brakes from locking up when you launch your boat, and the EZ-Latch is a step up from finnicky trigger latches. Primed, ready to weld, and proudly made in the USA.Just center your coupler over the hitch ball, and lower your trailer tongue as you normally would. As the coupler's socket slowly accepts the hitch ball, you'll see the latch rise. Keep lowering your trailer tongue until you hear the metalic clink .
6-1/16" x 3-3/4". Waterproof, incandescent light serves 8 functions on trailers over 80" wide: brake, tail, turn, side marker, side reflector, rear clearance, rear reflector, and license plate light. Stud mount. 3-Wire design.Features: Red, rectangular trailerlight serves 8 functions for trailers more than 80" wide Stop, Turn, Tail, Rear Clearance, Rear Reflex, Side Marker, Side Reflex Built-in license plate light illuminates trailer license plate Sealed, waterproof housing and lens unit is submersible Incandescent bulbs are easy to replace Shock-proof sockets protect bulbs against damage Durable plastic housing with snap-on lens Red lens over incandescent bulbs Compatible with 12V DC systems Stud mount to trailer with included studs 3-Wire design hardwires to trailer DOT compliant Specs: Configuration: driver side Passenger sider: ST56RS (sold separately) Dimensions: 6-1/16" long x 3-3/4" tall x 2-1/4" thick Distance between mounting studs (center on center): 2" Bulb type: 1157 and 194 Number of bulbs: 2 Power draw at 12.8V: Stop/turn: 2.3 amps Tail: 0.9 amps 3-Year warranty Manufacturer Cross Reference Light will work as an exact replacement for: Wesbar # 3025 Sealed, Waterproof TrailerLight The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
6-Way vehicle end trailer connector includes a rubber boot and connects the terminals from the elements.Features: Die-cast, 6-pole socket connects trailer to towing vehicle Round, split brass pins Minimum voltage drop is ensured Dielectric (non-conducting) grease coating Protects against corrosion and resistance Wire gauges up to #12 accepted Rubber boot conceals terminals for durability Provide easy assembly Spring-loaded lid Keeps dust and moisture out of interior 2-Hole mounting style Specs: Mounting dimensions: 1-3/8" diameter hole Mounting screw holes: 1/4" Distance between mounting holes (center to center): 2-3/4" Wiring configuration: Color - circuit: White - Ground Return Brown - Tail Lights Yellow - Left Turn Red - Stop and/or Electric Brakes Green - Right Turn Blue - Auxiliary Circuit 1-Year limited warranty 11-607 socket with 11-616 rubber boot
Filters
