Perfect for campers, RV travelers, and anyone using a trailer, these jacks make life easier and more enjoyable. They're designed with comfort and convenience in mind, helping you save time and energy for what matters most - your journey.Power Connection: Wires directly to 12-volt power source Automatic Reset, No Hassle: The 20A automatic reset relay fuse protects the jacksmotor from overloads or short circuits and resets itself automatically, no need for spares or replacements Nighttime Convenience: LED courtesy light on front of jack makes nighttime setup simple Protective Cover: Canvas cover shields your jack from the suns harmful rays and harsh weather Emergency Backup: Manual crank included for peace of mind when needed Moisture Protection: Rubber cover over the crank opening keeps out moisture and the elements Durable Finish: Tough black powder coat finish resists rust and corrosion Specs: Lift: 18" Lift capacity: 5,000 lbs Dimensions: Overall height: 29-1/2" Mounting plate height: 8-7/8" Footplate diameter: 5-1/2" Outer tube diameter: 2-1/4" Motor voltage: 12 volts 2-Year warranty
Manual jacks get old fast when you're trying to hitch up or level. This 5,000 lb electric A-frame jack runs off your 7-way, lifting your trailer with a switch, while the drop leg adds the extra reach you need to dial in height before leveling.On those trucks, the 12V circuit may only provide limited managed current after the trailer is positively detected and other conditions are met. That circuit is not intended to run a high-draw device like this jackmotor.
Automatically level and stabilize your travel trailer with this electronic leveling system. 5 Precise, motorizedjacks can be operated by the included control panel or via your smart device (if RV has Wi-Fi and factory-installed OneControl system).These jacks use sensors to measure the number of motor revolutions per minute instead of amp draw. This allows for more precise control over the motor than you'd have with conventional motorizedjacks, which results in more accurate leveling of your trailer.
Powered A-frame jack has 2 toggle switches for operation. Jack has a retracted height of 10-3/4", an extended height of 28-3/4", and 18" of travel. Extends 6" in 41 seconds with 1,000 lbs of tongue weight.So if you have a 5,000-lb trailer you would want a jack that can support at least 500 lbs to 750 lbs. How to Determine the Lift Capacity You Need in a Jack A trailerjack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball.
Perfect for campers, RV travelers, and trailer users, these jacks make adventures easier and more enjoyable. Designed for convenience and reliability, they save time and energy, so you can focus on what truly matters - your journey.Power Connection: Wires directly to 12-volt power source Automatic Reset, No Hassle: The 20A automatic reset relay fuse protects the jacksmotor from overloads or short circuits and resets itself automatically, no need for spares or replacements Nighttime Convenience: LED courtesy light on front of jack makes nighttime setup simple Protective Cover: Canvas cover shields your jack from the suns harmful rays and harsh weather Emergency Backup: Manual crank included for peace of mind when needed Moisture Protection: Rubber cover over the crank opening keeps out moisture and the elements Durable Finish: Tough black powder coat finish resists rust and corrosion Warranty: Limited lifetime warranty Specs: Lift: 18" Lift capacity: 3,500 lbs Dimensions: Overall height: 29-1/2" Mounting plate height: 8-7/8" Footplate diameter: 5-1/2" Outer tube diameter: 2-1/4" Motor voltage: 12 volts 2-Year warranty
Automatically level and stabilize your fifth-wheel RV with this electronic leveling system. 4 Precise, motorized jacks can be operated by either the included touchpad. Hitch recognition memory function offers simple hookup.These jacks use sensors to measure the number of motor revolutions per minute instead of amp draw. This allows for more precise control over the motor than you'd have with conventional motorizedjacks, which results in more accurate leveling of your trailer.
Smooth and powerful hydraulic jack lifts your heavy load without your help. Just press the button on the corded remote control to lift and lower your trailer. The large, pivoting foot pad stabilizes the jack even on rough terrain.Features: Hydraulic jack Ideal for use with horse and livestock trailers, as well as commercial and construction trailers Smooth and effortless operation, even for heavy loads Self-contained pump and power unit comes attached to the jack Convenient corded remote control switch Large, pivoting foot pad stabilizes on uneven surfaces Square tube Durable exterior-grade black finish Easy bolt-on installation Specs: Screw travel: 24-1/4" Bracket height: 34-7/8" Retracted 59" Extended Lift capacity: 12,000 lbs Support capacity: 15,000 lbs 500W 12V DC dual motor Reservoir capacity: 2.5 quarts Maximum pump load: 3,000 psi Working pressure: 1,500 psi Mounting tabs: 7-1/2" x 4" Foot pad: 10" long x 10" wide 1-Year warranty
Use this electric tongue jack to lift your trailer with the flip of a switch. The sturdy steel jack can handle up to 5,000 lbs. It has 18" of travel and a 5" drop leg for extra lift. LED lights on both sides boost visibility at night.Features: Electric jack with 12V motor lets you lift and lower your A-frame trailer quickly and easily Top-mounted toggle switches are easily accessible Large LED side lights make it simple to set up your camper at night Also ease weight distribution hookup and disconnect Bubble level on top of housing helps you level your trailer Bull's-eye design shows front to back and side to side Drop leg allows for greater adjustability Rust-resistant powder coated steel parts are strong and durable Housing is made of vacuum-formed plastic for protection from the elements Black cover is painted to resist fading Round, zinc-plated steel footplate provides stability Emergency crank (included) allows you to manually operate jack if needed Easy bolt-on installation for A-frame trailers 3 Star washers included for making a good ground from jack to trailer Mounting hardware sold separately Specs: Bracket height: 9-1/2" Retracted 27-1/2" Extended Total lift: 23" Travel: 18" Drop leg: 5" Lift capacity: 5,000 lbs Outer tube diameter: 2-3/16" Inner tube diameter: 1-15/16" Footplate diameter: 5-1/2" Power wire: 10 gauge Motor draws 30 amps under load 2-Year warranty How to Determine the Lift Capacity You Need in a Jack A trailerjack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball.
After a long drive, the last thing you want is to crank your trailer jack by hand. This electric jack does the heavy lifting with a push of the switch, and the drop leg and foot plate help you get level fast so you can settle in and relax.No Fuss, No Guesswork No complicated wiring or special tools needed here. Just bolt the jack on with the included hardware, wire the pigtails to your 12-volt power source, and you're ready for the next trip. How to Pick the Right TrailerJack Capacity Your jack just needs to lift the tongue weight - usually 10 - 15% of your trailer's total weight.
Automatically level and stabilize your fifth-wheel RV with this electronic leveling system. 6 Precise, motorized jacks can be operated by either the included touchpad or a Bluetooth compatible app on your smartphone.These jacks use sensors to measure the number of motor revolutions per minute instead of amp draw. This allows for more precise control over the motor than you'd have with conventional motorizedjacks, which results in more accurate leveling of your trailer.
After a long drive, the last thing you want is to crank your trailer jack by hand. This electric jack does the heavy lifting with a push of the switch, and the foot plate helps keep you steady on soft soil or gravel so you can settle in and relax.How to Pick the Right TrailerJack Capacity Your jack just needs to lift the tongue weight - usually 10 - 15% of your trailers total weight. For example, if your trailer (plus gear) weighs 20,000 lbs, your tongue weight will be 2,000 - 2,500 lbs.
Having two motors gives you more leveling control when setting up camp on uneven ground. 74" Bracket height when extended. 3 Universal mount weld stops let you choose how to orient the new legs. Total lift includes 17" of drop leg travel.When you have legs that extend at the same rate, leveling on uneven terrain can not only prevent your trailer from being perfectly level, but in extreme cases, it can bend and warp your chassis if they're pushed out too far. With independently operated legs, not only are you able to fine-tune how much each leg extends, but the clutch inside each motor will prevent the legs from over-extending.
Manual jacks get old fast when you're trying to hitch up or level. This 5,000 lb electric A-frame jack plugs into your 7-way for push-button lifting and includes an integrated SnapPad for a wider, more stable base on soft or uneven ground.On those trucks, the 12V circuit may only provide limited managed current after the trailer is positively detected and other conditions are met. That circuit is not intended to run a high-draw device like this jackmotor.
Use this electric tongue jack to lift your trailer with the flip of a switch. The steel jack has 19" of travel and a 5" drop leg for extra lift. Extends 6" in 32.2 seconds with 1,000 lbs of tongue weight.Features: Electric jack with 12V motor lets you lift and lower your A-frame trailer quickly and easily Top-mounted toggle switches are easily accessible Large LED side lights make it simple to set up your camper at night Also ease weight distribution hookup and disconnect Bubble level on top of housing helps you level your trailer Bull's-eye design shows front to back and side to side Drop leg allows for greater adjustability Rust-resistant powder coated steel parts are strong and durable Housing is made of vacuum-formed plastic for protection from the elements Black cover is painted to resist fading Round, zinc-plated steel footplate provides stability Emergency crank (included) allows you to manually operate jack if needed Easy bolt-on or weld-on installation for A-frame trailers 3-Star washer included to ensure good ground connection Mounting holes fit 3" spacing Specs: Bracket height: 8-1/2" Retracted 27-1/2" Extended Total Lift: 24" Travel: 19" Drop leg: 5" Travel speed (w/ 1,000-lb tongue weight): Extends 6" in 32.2 seconds Retracts 6" in 28.4 seconds Clearance from bottom of mounting plate to top of jack 23" Lift capacity: 3,500 lbs Outer tube diameter: 2-1/4" Inner tube diameter: 2" Footplate diameter: 5-1/2" Power wire: 10 gauge Motor draws 30 amps under load 2-Year warranty How to Determine the Lift Capacity You Need in a Jack A trailerjack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball.
Electric, fifth-wheel landing gear set's motor has an IP-rated switch for fast, easy, and safe operation. Each leg is 33-1/2" tall, offers 19-7/8" of travel, and has a 15" drop leg for extra lift. Combined weight capacity is 6.5K.Features: Perfect for raising, leveling, and supporting your 5th-wheel trailer or RV Direct-drive motor reduces strain on your jack and allows landing gear to lift with ease No clutch that could slip Single-speed motor won't trip circuits or cause problems with coach's electrical systems IP -rated switch will not spark, so it can be mounted safely in bottle-gas area Drop legs minimize jacking time and help to level the trailer on uneven ground Legs adjust in 1" increments Cage pins included to release drop legs Upgrade to spring-loaded pull pins (LG-119113 - sold separately) for simpler drop leg release Hand crank included for manual operation Heavy-duty steel construction Gearbox is housed in a corrosion-resistant aluminum body Landing gear welds onto trailer frame Set includes 2 jacks, gearbox, motor, switch, footplates, cross shaft, hand crank, and hardware Made in the USA Specs: Leg length: 33-1/2" Total lift: 34-7/8" Travel: 19-7/8" Drop leg: 15" Combined weight capacity: 6,500 lbs 1-Year warranty Note: Landing gear is designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer.
Manual jacks get old fast when you're trying to hitch up or level. This 3,500 lb electric A-frame jack runs off your 7-way, lifting your trailer with a switch, while the drop leg adds the extra reach you need to dial in height before leveling.On those trucks, the 12V circuit may only provide limited managed current after the trailer is positively detected and other conditions are met. That circuit is not intended to run a high-draw device like this jackmotor.
Manual jacks get old fast when you're trying to hitch up or level. This 3,500 lb electric A-frame jack plugs into your 7-way for push-button lifting and includes an integrated SnapPad for a wider, more stable base on soft or uneven ground.Features to know about Push-Button Lifting Power You remember those mornings spent fighting with a manual jack, hands sore before the day even starts. This 3,500 lb electric A-frame jack connects through your 7-way plug, so you press the switch and let the motor raise or lower your trailer.
If your RV is already prepped for the Ground Control 3.0 system, this kit has everything you will need to automatically level and stabilize it, without unneeded, duplicate components.These jacks use sensors to measure the number of motor revolutions per minute instead of amp draw. This allows for more precise control over the motor than you'd have with conventional motorizedjacks, which results in more accurate leveling of your trailer.
This fast electric A-frame jack has a durable, super-efficient ball screw and a memory function for fast, easy setup. Offers 26" of total lift. Extends 6" in 18.4 seconds with 1,000 lbs of tongue weight.The total lift listed above can help you determine how high this jack will be able to raise your trailer.
The EZ Jack is an easy-to-use, safe and reliable device that functions as a jack for changing tires on dual-axle trailers. It also serves as a wheel chock or a level. It supports up to 20,000 lbs yet weighs just 11 lbs for easy handling and storage.Features: Enables you to easily change a tire on your tandem-axle trailer Heavy-duty, crescent-shaped wedge with rocker design raises trailer off the ground Serves as a wheel chock to help keep your trailer in place on inclines and most surfaces Flip over and place narrow end in front of wheel Levels out your RV when it is parked on uneven terrain Drive up onto wedge to balance out your motor home Constructed of heavy-duty, corrosion-resistant cast aluminum Made in the USA Specs: Weight capacity: 20,000 lbs Dimensions: 24" long x 6-1/8" wide x 6" tall Weight: 11 lbs Lifetime warranty The Blaylock EZ trailerjack and wheel chock makes it easy to change or service a tire on your dual-axle trailer.
Use this electric tongue jack to lift your trailer with the flip of a switch. The sturdy steel jack can handle up to 4,500 lbs. It has 18" of travel and a 5" drop leg for extra lift. LED lights on both sides boost visibility at night.Features: Electric jack with 12V motor lets you lift and lower your A-frame trailer quickly and easily Top-mounted toggle switches are easily accessible Large LED side lights make it simple to set up your camper at night Also ease weight distribution hookup and disconnect Bubble level on top of housing helps you level your trailer Bull's-eye design shows front to back and side to side Drop leg allows for greater adjustability Rust-resistant powder coated steel parts are strong and durable Housing is made of vacuum-formed plastic for protection from the elements Black cover is painted to resist fading Round, zinc-plated steel footplate provides stability Emergency crank (included) allows you to manually operate jack if needed Easy bolt-on installation for A-frame trailers 3 Star washers included for making a good ground from jack to trailer Mounting hardware sold separately Specs: Total lift: 23" Screw travel: 18" Drop leg: 5" Lift capacity: 4,500 lbs 2-Year warranty How to Determine the Lift Capacity You Need in a Jack A trailerjack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball.
This super-fast electric A-frame jack has a durable, efficient ball screw and a memory function for easy setup. Offers 18" of travel and 4-1/2" of extension with the drop leg. Extends 6" in 9.5 seconds with 1,000 lbs of tongue weight.The total lift listed above can help you determine how high this jack will be able to raise your trailer.
Electric, fifth-wheel landing gear set's motor has an IP-rated switch for fast, easy, and safe operation. Each leg is 29-1/2" tall, offers 19-7/8" of travel, and has a 15" drop leg for extra lift. Combined weight capacity is 6.5K.Features: Perfect for raising, leveling, and supporting your 5th-wheel trailer or RV Electric-powered adjustment for easy operation Direct drive reduces strain on your jack and allows landing gear to lift with ease No clutch that could slip Single-speed motor won't trip circuits or cause problems with coach's electrical systems IP -rated switch will not spark, so it can be mounted safely in bottle-gas area Drop legs minimize jacking time and help to level the trailer on uneven ground Legs adjust in 1" increments Cage pins included to release drop legs Upgrade to spring-loaded pull pins (LG-119113 - sold separately) for simpler drop leg release Hand crank included for manual operation Heavy-duty steel construction Gearbox is housed in a corrosion-resistant aluminum body Landing gear welds onto trailer frame Set includes 2 jacks, gearbox, motor, switch, footplates, cross shaft, hand crank, and hardware Made in the USA Specs: Leg length: 29-1/2" Total lift: 34-7/8" Travel: 19-7/8" Drop leg: 15" Rate of travel: 5-1/2" per minute Combined weight capacity: 6,500 lbs Cross shaft length: 41" - 71" Footplate dimensions: 8" long x 5" wide x 2" tall Outer tube width: 2-1/2" 1-Year warranty Note: Landing gear is designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer.
Filters
