Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
Both the ProPride 3P part #PR57QR and the B and W Continuum part #BW78FR allow backing up and work extremely well but since there isn't a ProPride system that would be ideal for the tongue weight of your Winnebago Minnie FLX2306 I would go…
view full answer...Either one is fine to do. With the Fulton Hi-Mount Spare Tire Carrier part #FSTC1000301 you are not going to be adding a great deal of width to your trailer so the difference is minimum. Giving you my opinion since there is no rule I would Choose…
view full answer...Yes, you are correct the best hitch lock to prevent rust and corrosion is the stainless steel lock. The stainless steel locks will not corrode. The Trailer Hitch Receiver Lock - Stainless Steel Flush Design, #e98882, is one of our top sellers. The…
view full answer...I have a couple of option that fit in your size range but only the Kenda 205/50-10 Bias Tire part #AM90016 has the 10" rim overall it is 18.3" in diameter so it is really pushing your clearance range. The second option is the largest…
view full answer...It sounds like you are asking if your weight distribution system needs to be readjusted if the vehicle has been lifted/leveled since it was setup and if so then yes, you will need to change the hitch head height adjustment on the weight distribution…
view full answer...If you tilt the head of a weight distribution system like the #RP66083 back away from the front of the tow vehicle you will apply more spring bar tension which will effectively move more trailer tongue weight to the front axle of the tow vehicle.…
view full answer...If the trailer is less than 1 inch off of being perfectly level either up or down then it will be perfectly fine. Having it slightly higher would be better because presumably the tongue weight of the trailer will pull it down a little. You could also…
view full answer...The ST205/75R15 tire size translates to an overall diameter of just over 27-inches when mounted and inflated. For this tire diameter we offer three black covers that will fit. Part #052963753479 from Classic Accessories is a universal-fit cover that…
view full answer...Thanks for the pictures! The only thing I would recommend changing on your set up is to add a shank with a deeper drop. I recommend the Curt Weight Distribution Shank 13" Long item #C17124 which has a 9" drop. This would move the bars below…
view full answer...The trailer frame mounted brackets for the Curt Short-Arm Weight Distribution System #C17422 should be positioned on the trailer so that the chain hangs directly down to the spring bar. The picture you mentioned is simply the studio photo we took…
view full answer...Since your F-150's Class V hitch has a weight carrying capacity of 5000-lbs and a weight distributing capacity of 9900-lbs, then you do indeed need a weight distribution (WD) system to tow your trailer with a maximum gross weight of 7640-lbs. The…
view full answer...Appreciate the photo, and yes you can, but you'll need to use bolt-on chain hangers if there is interference that won't allow the brackets to mount to the top of the tongue 28" back. So you'd need to bolt on the chain hangers to the…
view full answer...Related Searches
Filter Your Search
Contact and Help