Dress up your plain wheel with this durable ABS plastic hub cover. The chrome-plated cover snaps into place over your wheel's 1-1/16" lug nuts. A 2-3/4" diameter indent allows for the application of an emblem sticker.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Ellen: Hey everyone, I'm Ellen here at etrailer.com, today we're taking a look at the Phoenix USA QuickTrim Hub Cover. This is for trailer wheels that have an eight by six and a half bolt pattern. So this cover is going to kind of finish up the look of our trailer, make it look a little classier and sort of give us an upgrade there. It's just going to cover our wheel studs, so we'll not only have that kind of completed look or that finished up look, but it also helps to protect those from any kind of tampering. Now this is made of an ABS plastic construction with a nice polished chrome plating. And if we flip this over, we'll have several different pockets for our cover to snap in place, and the distance for these or the width on each of those little pockets is going to be about an inch and a 16th.So we'll have these little adapters that will install on the studs for our wheel and these fit a five eighths inch fine threaded bolt, and basically we'll just put that lug head or that hex head out towards our cover so we can tighten it onto our studs, and then whenever we put it in place, it'll snap down into the little teeth on the cover.
So once it's in place, it'll push that out, it's a little kind of hard to show you when it's not actually installed on a wheel, but we want to make sure that these are more or less evenly spaced as much as possible, so we can have a good hold on our cover, so something kind of like that. Again, these will go over the threads, over the top of our studs and our nuts. We don't have to take off any hardware on the wheel it's just going to thread on, on top of it and again we'll have that hex set on top. This is going to be 13, 16, so a 13 16th socket will work for these.And again, the bolt pattern that this fits is going to be eight since we have one, two, three, four, five, six, seven, eight lugs there, and those are six and a half inches apart, center to center from the studs. As far as the outer dimensions of the cover, it's about eight and a half inches wide or eight and a half inches in diameter and then it's about four inches deep.
It will be a little easier for you to see. There, about four inches deep there, it does have a little indent in the cap. So if you wanted to put a logo there, it will allow that, that's going to be two and three quarter inches in diameter for that little indent.And if you ever want to do some maintenance on the end of your axle, maybe move up your EZ lube spindle. You can pop this out with a flat blade screwdriver to get access to that without having to remove the whole cover. If you do need to remove the cover, there's another little notch out where again, you can use that flat bladed screwdriver, pry this out and get access to those wheel studs.
The outer diameter of our adapters again is going to be one and a 16th. The thread size will be five, eight fine thread, and each of these is going to be about. An inch long. inaudible 00:03:43 can I do it for our look at the Phoenix USA QuickTrim Hub Cover for trailer wheels..
Average Customer Rating: 4.9 out of 5 stars (1129 Customer Reviews)
Dress up your plain wheel with this durable ABS plastic hub cover. The chrome-plated cover snaps into place over your wheel's 1-1/16" lug nuts. A 2-3/4" diameter indent allows for the application of an emblem sticker.harware to attach to lugs do not fit 1/2 studs, does not specify in ordering to have correct side hardware to match stud size.
Bought these to replace the axle covers that came from the factory which are made from a cheap chrome steel cap, which are constantly rusting. These are made like the semi-trucks use a chrome plated plastic which holds up well and looks great!
Covers look good and all parts required with instructions were included. Simple install. They don't fit as tight as I thought they would or the ones I replaced them with, which I had lost one. Have my doubts that they will stay on. Maybe if they had included 4 nuts to secure to the rim rather than 3 would be better, which is what my old covers had.
Very helpful! On the spot
Review from a similar QuickTrim in Accessories and Parts
Great way to brighten up a 2004 Adam trailer. Very easy to install. Great service and appreciated the helpful photos and videos. Pictured is one side installed other side without. Now just need good ways to clean aluminum and painted surfaces!
Review from a similar QuickTrim in Accessories and Parts
My wife & I installed the Phoenix Quick Trim Hub Cover for Trailer tires (Item # QT655C) that Joshua K. helped us be sure we were getting the correct hubcaps. The two hubcaps snapped in place with a rubber mallet without any struggle. I can't believe they will come off. We were pleased with the service we received from Joshua K. and the company stocking the variety of hubcaps so we could choose the correct ones.
Review from a similar QuickTrim in Accessories and Parts
Shipment was quick...product received in good condition. Installed on my trailer and looks great. The reason I ordered these is because in order to grease the axles, I had to remove the wheels to remove the rubber protective covering on the end of the axle. Now since I have removed the rubber protective covering, this product protects the axle, but allows just the removal of this cover.
Review from a similar QuickTrim in Accessories and Parts
These hub covers were used on a boat trailer to replace the originals. After 15 years, they were no longer secure. As it turns out these are exactly the same as the originals on my Nitro boat trailer. Perfect! And they were in stock here in Missouri.
Review from a similar QuickTrim in Accessories and Parts
Installation was a cake walk and the look is awesome! I hope they hold up for a few years.
Review from a similar QuickTrim in Accessories and Parts
Hub covers are great for my needs: they will keep a lot of road dirt out of the hubs on my trailer. The wheels had to have 2 inch spacers, so there is a significant cavity that would otherwise collect dirt.
Review from a similar QuickTrim in Accessories and Parts
I really like the hub covers, They make my trailer look complete, And the service and price are always great at a trailer.
Review from a similar QuickTrim in Accessories and Parts
I bought these to Dress up a Landscape trailer I Haul everything with. I chose these covers for ease of Maintenance in Accessing the Grease caps & servicing the Hubs without Having to pull the Wheel. I also did not want to purchase 10 Acorn lug nuts. I added the AR emblem center Sticker because My Tow Vehicle has AR Rims on it. (Small Detail BUT NOTICED). They come with A Blank 1 1/2 Center so You can add Whatever Cap Emblem You Want. It's a "Carry On Trailer". It Just had some kind of paint on it when I got it Four Years ago. I refurbished it in a couple nights after work. These Caps Go Very well with the NEW black Re-Paint. They stay on at Highway Speed. They secure tight to the lugnuts. I went over some railroad grade crossings & they're still hangin in there.
Review from a similar QuickTrim in Accessories and Parts
Perfect fit. Now I have easy access to my bearing buddies.
Review from a similar QuickTrim in Accessories and Parts
I now have the best looking snow tire set in Canada, nobody here believes in Hub Covers and I don't know why, they fit great, and look even better!!!!
Review from a similar QuickTrim in Accessories and Parts
These hub caps looked real nice on my horse trailer, but all 4 fell off in less than 500 miles. I put them on per the instructions in the video, but maybe a bumpy road did them in? After I lost one I kept checking them whenever I stopped, but the others are also on the side of the road somewhere. The hub covers that snap on to the lug nuts are still on the trailer.
Review from a similar QuickTrim in Accessories and Parts
The center cap fit snugly and looked great The price was also great.
Review from a similar QuickTrim in Accessories and Parts
These fit perfectly and look great on my trailer! I lost one of the factory original hub caps going down the road and wanted a matching set when I replaced it. They snapped on quickly and were easy to find by matching the product number to my remaining hub caps.
Review from a similar QuickTrim in Accessories and Parts
Fit like a glove. Covered up the uglyness in the center of the black wheels on my trailer.
Review from a similar QuickTrim in Accessories and Parts
Good product. Never liked exposed studs or lug nuts and this covers them quite nicely. Fits perfectly.
Review from a similar QuickTrim in Accessories and Parts
The plastic caps look great, I lost 2 and 1 hub cover on the trailer,during my round trip from Philadelphia to Boston, lost both on the passenger side of the trailer,I even checked the wheels when I stopped for fuel,I will be using zip cable ties to hold the caps to the rims,to expensive to lose.
Review from a similar QuickTrim in Accessories and Parts
I was apprehensive about being plastic but have been impressed so far as they have held up fine even after being removed multiple times. Great product.
Review from a similar QuickTrim in Accessories and Parts
Great people great products. Enjoy shopping with etrailer. Will keep them on my list and surely telling people about them.
Review from a similar QuickTrim in Accessories and Parts
One out of 4 hub covers where wrong and I called and they were quick to send a replacement of it and very pleased with them.
Review from a similar QuickTrim in Accessories and Parts
Good fit and looks great. Etrailer.com is the way to go.
Review from a similar QuickTrim in Accessories and Parts
They had exactly what I was needing for my trailer . Easy to order and I have my product. Easy, Fast and I will be back Thank You
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.