Vent allows air to circulate in and out of your enclosed trailer. Easily open and close with the sliding lever to adjust the airflow. Aluminum construction is durable, lightweight, and corrosion resistant.Features: Vent allows air to circulate in and out of your enclosed trailer Easy to open - just slide the lever to open and close vent Louvres direct airflow up or down depending on how the vent is mounted (4) 2" Holes in rear of unit allow air in and out Durable, rustproof aluminum front and back plates Insert is constructed of corrosion-resistant zinc-plated steel Specs: Overall dimensions: 12-1/4" long x 10-1/2" wide 2-7/8" Between mounting holes on top (center to center) 3" Between mounting holes on sides (center to center) Ventilation hole diameter: 2" Mounting hole diameter: 7/32"
Heavy-duty, 2-part vent will stand up to the elements for years. Exterior vent houses a baffle that directs any intruding rainwater toward corner drain openings. Interior butterfly vent adjusts so you can control the amount of airflow.Features: Rugged, heavy-duty vent holds up to whatever nature can dish out Rectangular exterior piece is designed to shed rainwater while allowing air movement Sloped shape encourages water to run off Interior baffle directs rainwater toward corner drain holes Louvers on top allow airflow Built-in, threaded holes provide mounting points for interior piece Round interior piece has a sliding door that lets you control how much air flows in and out Gasket included Sturdy steel construction White powder coated exterior vent Zinc-plated interior grille Made in the USA Specs: Fits 6" diameter hole or smaller Exterior vent dimensions: 12" long x 10" wide x 2" thick Interior vent dimensions: 7-1/4" diameter x 3/16" thick Notes: 20 Screws (sold separately) required to mount exterior piece (4) #10/32 Machine screws (not included) required to mount interior vent. For walls up to 1/2" thick, use machine screw 29515 (sold separately) Sealant sold separately
This 2-piece vent provides an inexpensive yet attractive way to ventilate your enclosed trailer. Round interior vent and half-moon-shape exterior piece are both constructed of black, UV-resistant polypropylene plastic that holds up to sun exposure.Features: Affordable trailer vent provides continuous ventilation for your enclosed trailer To increase ventilation, you can install more than 1 vent 2-Piece design creates a low-profile vent that's attractive both inside and outside your trailer Half-moon piece with flat, slotted side attaches to trailer's exterior Slots are on one side only, allowing you to position the vent for best airflow and to help prevent water from getting in Drain holes at the corners let out any water that does get in Round, slotted interior piece installs inside your trailer You can easily trim vent tube to fit thin walls UV-resistant, polypropylene plastic construction stands up to the elements Black color 9 Screws and sealant (sold separately) required for installation Specs: Fits 3" diameter hole in enclosed trailer Exterior half-moon dimensions: 8" long x 6" tall x 1-1/4" thick Flange width: 1/2" Interior circular piece dimensions: Diameter at flange: 4-1/8" Vent tube outside diameter: 2-15/16" Tube depth: 1-1/2" Flange width: 5/8"
This 2-piece vent provides an inexpensive yet attractive way to ventilate your enclosed trailer. Round interior vent and half-moon-shape exterior piece are both constructed of white, UV-resistant polypropylene plastic that holds up to sun exposure.Features: Affordable trailer vent provides continuous ventilation for your enclosed trailer To increase ventilation, you can install more than 1 vent 2-Piece design creates a low-profile vent that's attractive both inside and outside your trailer Half-moon piece with flat, slotted side attaches to trailer's exterior Slots are on one side only, allowing you to position the vent for best airflow and to help prevent water from getting in Drain holes at the corners let out any water that does get in Round, slotted interior piece installs inside your trailer You can easily trim vent tube to fit thin walls UV-resistant, polypropylene plastic construction stands up to the elements White color 9 Screws and sealant (sold separately) required for installation Specs: Fits 3" diameter hole in enclosed trailer Exterior half-moon dimensions: 8" long x 6" tall x 1-1/4" thick Flange width: 1/2" Interior circular piece dimensions: Diameter at flange: 4-1/8" Vent tube outside diameter: 2-15/16" Tube depth: 1-1/2" Flange width: 1/2"
Heavy-duty plastic vent attaches to outside wall of RV or enclosed trailer to keep water out of range hood exhaust outlet. Canopy blocks out water. Damper can be locked closed. Collar extends 1-3/4" into wall. ... Install screws to hold vent to trailerwall.
Heavy-duty plastic vent attaches to outside wall of RV or enclosed trailer to keep water out of range hood exhaust outlet. Canopy blocks out water. Damper can be locked closed. Collar extends 1-3/4" into wall. ... Install screws to hold vent to trailerwall.
Heavy-duty plastic vent attaches to outside wall of RV or enclosed trailer to keep water out of range hood exhaust outlet. Canopy blocks out water. Damper can be locked in closed position. ... Install screws to hold vent to trailerwall.
We recommend this sturdy plastic vent because it helps keep water out of your camper' range hood exhaust, protecting your space from moisture damage. The 1-3/4" collar ensures a secure fit, and the lockable damper adds extra peace of mind.Install screws to hold vent to trailerwall.
We recommend this sturdy plastic vent because it helps keep water out of your camper's range hood exhaust, protecting your space from moisture damage. The 1-3/4" collar ensures a secure fit, and the lockable damper adds extra peace of mind.Install screws to hold vent to trailerwall.
We recommend this sturdy plastic vent because it helps keep water out of your camper's range hood exhaust, protecting your space from moisture damage. The 1-3/4" collar ensures a secure fit, and the lockable damper adds extra peace of mind.Install screws to hold vent to trailerwall.
This roof vent's powered, 12-volt fan and dome lift provide the ultimate in convenience for ventilating motor homes and enclosed trailers. Fan and wedge-shaped, plastic vent cover are operated from a remote wall switch, included.Features: Roof vent's electric fan yields better air circulation than non-powered models, exhausting hot air while trailer or RV remains locked and secure Power lift opens and closes cover, eliminating hand cranking Simple to upgrade from non-powered model Included wall remote switch provides convenient operation Translucent cover allows some light through Aerodynamic, wedge-shaped dome made of durable polypropylene Galvanized steel roof flange won't rust or corrode Snap-out screen is easy to clean Polar White interior trim piece (or garnish) is included Fan and power lift use 12-volt DC power Wiring sold separately Made in the USA Specs: Included garnish fits roofs 2-1/8" to 3-1/4" thick Garnish leg length (depth): 2-1/8" Garnish color: Polar White Other garnish sizes are available (sold separately) Fan capacity: 100 CFM Fan and lift power: 12-volt DC Cover color: white Rough opening size: 14-1/4" x 14-1/4" Vent extends above roof: 4-1/2" Closed 10" Open 2-year warranty Notes: Screws and sealer are not included.
This roof vent's powered, 12-volt fan and dome lift provide the ultimate in convenience for ventilating motor homes and enclosed trailers. Fan and wedge-shaped, plastic vent cover are operated from a remote wall switch, included.Features: Roof vent's electric fan yields better air circulation than non-powered models, exhausting hot air while trailer or RV remains locked and secure Power lift opens and closes cover, eliminating hand cranking Simple to upgrade from non-powered model Included wall remote switch provides convenient operation Translucent cover allows some light through Aerodynamic, wedge-shaped dome made of durable polypropylene Galvanized steel roof flange won't rust or corrode Snap-out screen is easy to clean Polar White interior trim piece (or garnish) is included Fan and power lift use 12-volt DC power Wiring sold separately Made in the USA Specs: Included garnish fits roofs 2-1/8" to 3-1/4" thick Garnish leg length (depth): 2-1/8" Garnish color: Polar White Other garnish sizes are available (sold separately) Fan capacity: 100 CFM Fan and lift power: 12-volt DC Cover color: Smoke Rough opening size: 14-1/4" x 14-1/4" Vent extends above roof: 4-1/2" Closed 10" Open 2-year warranty Notes: Screws and sealer are not included.
Perfect for use with high-powered fans, this cover has a wide vent area so that it provides more airflow than standard covers. EZClip pins allow the cover to be opened and closed with ease. No-drill installation on MaxxFan and MaxxFan Plus vents.If you are installing this cover over an older-model MaxxFan roof vent without mounting tabs, no drilling is required and all necessary hardware is included. The MaxxFan roof vent has pre-drilled holes in the side wall that are hidden under plastic plugs. Just remove the plugs and fasten the aluminum brackets to the side wall with the stainless steel screws.
Durable, UV-resistant cover lets you run your RV roof vent any time and in any weather. Angled louvers allow smoke, heat, and odors to escape while keeping rain and debris out. EZClip pins allow the cover to be opened or removed for easy maintenance.Installation on Older Model MaxxFan and MaxxFan Plus Roof Vents If you're installing this cover over an older model MaxxFan or MaxxFan Plus roof vent without mounting tabs, no drilling is required, and all necessary hardware is included. The MaxxFan roof vent has pre-drilled holes in the side wall that are hidden under plastic plugs. Just remove the plugs and fasten the aluminum brackets to the side wall with stainless steel screws.
Durable, UV-resistant cover lets you run your RV roof vent any time and in any weather. Angled louvers allow smoke, heat, and odors to escape while keeping rain and debris out. EZClip pins allow the cover to be opened or removed for easy maintenance.Installation on Older Model MaxxFan or MaxxFan Plus Roof Vents If you're installing this cover over an older model MaxxFan or MaxxFan Plus roof vent without mounting tabs, no drilling is required, and all necessary hardware is included. The MaxxFan roof vent has pre-drilled holes in the side wall that are hidden under plastic plugs. Just remove the plugs and fasten the aluminum brackets to the side wall with stainless steel screws.
Perfect for use with high-powered fans, this cover has a wide vent area so that it provides more airflow than standard covers. EZClip pins allow the cover to be opened and closed with ease. No-drill installation on MaxxFan and MaxxFan Plus vents.If you are installing this cover over an older-model MaxxFan roof vent without mounting tabs, no drilling is required and all necessary hardware is included. The MaxxFan roof vent has pre-drilled holes in the side wall that are hidden under plastic plugs. Just remove the plugs and fasten the aluminum brackets to the side wall with the stainless steel screws.
X track shelf bundle lets you create anchor points and build shelves or a storage rack on your trailer or in your workshop. The rails mount horizontally or vertically, and they accommodate any X track or E track strap, anchor, hook or accessory.Features: X track rails: Provide tie-down points for securing cargo on your trailer, truck or van Also works great on the wall in your garage or workshop For use with X track and E track straps, anchors, hooks, and other accessories X-shaped slots let you mount track vertically or horizontally on wall Provide more versatility for placement when compared with standard E track systems Easy installation with screws or rivets (not included) Zinc-plated steel construction is corrosion resistant Matte black color Board holders: Simple to build shelves or storage rack - just set boards inside holders Holes in sides of holders let you secure boards with screws (not included) Also create shoring beams to secure large, bulky items in your enclosed trailer Each shoring beam requires (1) 1-3/4" thick board Steel construction with yellow zinc plating is strong and corrosion resistant Easy installation of accessories - just snap spring-loaded fitting into E track or X track anchor points Accessories can be easily moved from one E track or X track slot to another Specs: X-track rails: Quantity: 4 Dimensions: 60" long x 5" wide x 1/4" tall Safe working load limit (WLL): 667 lbs Maximum load (break strength): 2,000 lbs Number of anchor slots: 15 Distance between mounting holes (center to center): Horizontal: 2" Vertical: 4-1/2" Diameter of mounting holes: 1/4" Distance between mounting holes (center to center): 4-1/2" Weight: 8.7 lbs Board holders: Quantity: 8 Dimensions: 3-3/4" deep x 2-15/16" tall x 2" wide Inside dimensions (edge to edge): 1-3/4" Weight: 0.94 lbs 1-Year limited warranty
18" Long. Interior cove lighting strip illuminates a trailer's interior. Great White series features ultra bright white diodes. Molded seal resists dust, moisture, and vapor. Surface screw mount to trailerwall or ceiling. 2-Wire design.Features: Interior cove lighting strip illuminates a trailer's interior Perfect for enclosed trailers and insulated cargo areas Great White series features custom-cut optics and ultra-bright white diodes for increased light output Molded sealing resists dust, moisture, and vapor LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Clear lens over white LEDs Compatible with 12V and 24V DC systems Surface screw mount to trailerwall or ceiling Can be mounted vertically or horizontally Mounting hardware not included 2-Wire design includes ground wire and lead wire for power Made in the USA Specs: Dimensions: 19-11/16" long x 1-3/4" wide Wire lead length: 3-1/2" Light output: 1,000 lumens Diodes: 12 Power draw at 12V: 0.36 amps IP rating: IP67 10-Year limited warranty
6" Long. Interior cove lighting strip illuminates a trailer's interior. Great White series features ultra bright white diodes. Molded seal resists dust, moisture, and vapor. Surface screw mount to trailerwall or ceiling. 2-Wire design.Features: Interior cove lighting strip illuminates a trailer's interior Perfect for enclosed trailers and insulated cargo areas Great White series features custom-cut optics and ultra-bright white diodes for increased light output Molded sealing resists dust, moisture, and vapor LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Clear lens over white LEDs Compatible with 12V and 24V DC systems Surface screw mount to trailerwall or ceiling Can be mounted vertically or horizontally Mounting hardware not included 2-Wire design includes ground wire and lead wire for power Made in the USA Specs: Dimensions: 7-11/16" long x 1-1/16" wide Light output: 300 lumens IP rating: IP67 10-Year limited warranty
12" Long. Interior cove lighting strip illuminates a trailer's interior. Great White series features ultra bright white diodes. Molded seal resists dust, moisture, and vapor. Surface screw mount to trailerwall or ceiling. 2-Wire design.Features: Interior cove lighting strip illuminates a trailer's interior Perfect for enclosed trailers and insulated cargo areas Great White series features custom-cut optics and ultra-bright white diodes for increased light output Molded sealing resists dust, moisture, and vapor LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Clear lens over white LEDs Compatible with 12V and 24V DC systems Surface screw mount to trailerwall or ceiling Can be mounted vertically or horizontally Mounting hardware not included 2-Wire design includes ground wire and lead wire for power Made in the USA Specs: Dimensions: 13-11/16" long x 1-3/4" wide Wire lead length: 3-1/2" Light output: 400 lumens Diodes: 6 Power draw at 12V: 0.17 amps IP rating: IP67 10-Year limited warranty
6" Long. Interior cove lighting strip illuminates a trailer's interior. Great White series features ultra bright white diodes. Molded seal resists dust, moisture, and vapor. Surface screw mount to trailerwall or ceiling. 2-Wire design.Features: Interior cove lighting strip illuminates a trailer's interior Perfect for enclosed trailers and insulated cargo areas Great White series features custom-cut optics and ultra-bright white diodes for increased light output Molded sealing resists dust, moisture, and vapor LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Clear lens over white LEDs Compatible with 12V and 24V DC systems Surface screw mount to trailerwall or ceiling Can be mounted vertically or horizontally Mounting hardware not included 2-Wire design includes ground wire and lead wire for power Made in the USA Specs: Dimensions: 7-11/16" long x 1-3/4" wide Wire lead length: 3-1/2" Light output: 300 lumens Diodes: 4 Power draw at 12V: 0.28 amps IP rating: IP67 10-Year limited warranty
When you need sturdy sidewalls for your flatbed truck or utility trailer, this weld-on stake pocket makes it simple. Just drop in a 2x4 board and know your cargo is staying put. It's raw metal, so give it a painted finish to prevent rusting.Highlights Quick, Custom Walls: Welds onto your utility trailer or flatbed to create sturdy cargo walls with a standard 2x4 board. Keeps Gear in Place: Stops cargo from sliding out, even on bumpy roads.
Perfect for use with high-powered fans, this cover has a wide vent area so that it provides more airflow than standard covers. EZClip pins allow the cover to be opened and closed with ease. No-drill installation on MaxxFan and MaxxFan Plus vents.If you are installing this cover over an older-model MaxxFan roof vent without mounting tabs, no drilling is required and all necessary hardware is included. The MaxxFan roof vent has pre-drilled holes in the side wall that are hidden under plastic plugs. Just remove the plugs and fasten the aluminum brackets to the side wall with the stainless steel screws.
Durable, UV-resistant cover lets you run your RV roof vent any time and in any weather. Angled louvers allow smoke, heat, and odors to escape while keeping rain and debris out. EZClip pins allow the cover to be opened or removed for easy maintenance.Installation on Older Model MaxxFan or MaxxFan Plus Roof Vents If you're installing this cover over an older model MaxxFan or MaxxFan Plus roof vent without mounting tabs, no drilling is required, and all necessary hardware is included. The MaxxFan roof vent has pre-drilled holes in the side wall that are hidden under plastic plugs. Just remove the plugs and fasten the aluminum brackets to the side wall with stainless steel screws.
Filters
