The hydraulic bottlejack lifts, holds, and locks vehicles in place without jack stands. Properly fitting unibody framed vehicles, the Unijack is perfect for cars, crossovers, and small SUVs and trucks. 21" Lift range with 3 ton capacity.Using a Unijack Begin using the Unijack by placing it on solid, level ground in a vertical position under the vehicle or object you wish to lift. Determine the best lifting point to support the bottlejack and line up the piston ram underneath it. Once everything is lined up correctly, turn the lever switch at the base of the piston clockwise to allow you to move the piston up and down.
If you off-road but space is tight, this Tallboy kit gives you both lifting and support in one setup. The 6-ton bottlejack reaches high-clearance rigs, while the 6-ton stand supports the raised load so you can reposition the jack and keep working.Free Up Your Jack: Transfer the raised load to the stand so you can reposition the bottlejack for the next step. Stay Planted on Rough Ground: Oversized jack base gives you a broad foundation on gravel, sand, dirt, and other uneven surfaces.
If you off-road but space is at a premium, the Tallboy is a compact bottlejack that can still create some serious lift. The oversized base plate gives you a solid foundation on the trail. And it only takes up about one cubic foot when stored.Once the vehicle is raised, the Power Mountain Tallboy jack stand (sold separately) can take over the support job. It adjusts from 10-13/16" to 28-3/4" and supports up to 6 tons, letting you secure the raised load and free up your Tallboy jack for the next lifting position.
If you off-road but space is tight, the Tallboy kit gives you both lifting and support in one setup. The 2-ton bottlejack handles ATVs and side-by-sides, while the 6-ton stand supports the raised load so you can reposition the jack and keep working.Free Up Your Jack: Transfer the raised load to the stand so you can reposition the bottlejack for the next step. Stay Planted on Rough Ground: Large jack base gives you a broad foundation on gravel, sand, dirt, and other uneven surfaces.
If a tire gives out on your camper, you need a jack that handles the weight. The Tallboy combines compact size with 12-ton lift capacity and provides some serious lift. And the oversized base plate helps with stability on rough ground.Even when the shoulder is a little rough, the oversized base plate helps the jack stay planted and secure. You can use the swappable saddles to lift from the axle or the frame, depending on what's safest. And if you want additional stability, a jack pad (like the Outrigger Pad or StakPad ) can add another layer of support.
If you off-road but space is at a premium, the Tallboy is a compact bottlejack that can still create some serious lift. The large base plate gives you a solid foundation on the trail. It packs away to about one cubic foot when stored.Once the vehicle is raised, the Power Mountain Tallboy jack stand (sold separately) can take over the support job. It adjusts from 10-13/16" to 28-3/4" and supports up to 6 tons, letting you secure the raised load and free up your Tallboy jack for the next lifting position.
... The bottlejack locks into place for a stable, safe lift.Features: Raises, lowers, and stabilizes high profile vehicles, house foundations, and heavy equipment Great for garages, shops, or to keep as a spare in your vehicle Handle locks into place to assure a secured upright position Steel saddle and cast handle socket Meets ANSI standards Specs: Weight capacity: 2 tons Lift: 6-3/16" - 12-1/16" Base dimensions: 3" wide x 3-1/2" long 1-Year warranty Note: This jack is designed to lift and stabilize 2 tons and should not be used to lift over that weight. Using a BottleJack Begin using the bottlejack by placing it on solid, level ground in a vertical position under the vehicle or object you wish to lift.
These leveling scissor jacks with a 5,000-lb combined capacity will keep your RV level and stable. They adjust from 5" to 23-3/4" as your application requires. ... Do not use these jacks to lift your trailer or RV. Doing so will exceed the capacity of the jacks.
Minimize chassis movement in your fifth-wheel RV with this jack stabilizer kit. Attach the telescoping tubes to your jacks and position them in place to brace your trailer frame. Includes 4 stabilizers for use at front of camper and 2 for the rear.Features: Helps to stabilize your 5th-wheel RV and eliminate unwanted chassis movement Stabilizer bars form triangles at front and rear jacks to prevent shaking and swaying Installs easily on 5th-wheel campers Bolts onto C-channel, I-beam or H-beam trailer frames - no welding required Attaches to traditional stabilizer jacks, scissor jacks, and/or landing gear - adapters for electric and hydraulic jacks sold separately Telescopes for perfect fit Locks securely in place with simple twist of T-handle Bolt-on installation - no welding required One end of each stabilizer tube attaches to each landing gear leg and the other end attaches to the RV frame Includes: 6 Stabilizer outer tubes 6 Stabilizer inner tubes 2 Clevis brackets 6 Stiffening pads 4 Spacer mounts 6 T-bolts 4 Flanged bushings 30 Nuts 48 Washers 18 Hex cap screws 10 Swing bolts 2 Silver bullet lifting handles 2 Hex nuts 8 Hex washer heads 1 Warning sticker for jacks Application: 5th-wheel trailers with less than 58" between front landing gear legs 1-Year warranty Specs: Telescoping tube: Retracted length: (2) 24" and (2) 27" Extended length: (2) 44" and (2) 47" 1-Year limited warranty
Drop-leg jack stabilizes your lightweight cargo or camper trailer. Weld the bracket onto your trailer, pull the pin to lower the drop leg, and pin in place. ... Features: Drop-leg stabilizing jack helps keep your lightweight trailer or camper level and steady Great for loading and unloading cargo or for camping Telescoping drop leg lets you adjust the height Once welded to the trailer, pull the pin to lower the drop leg and reinsert it to keep the leg in place Round footplate provides stability Sturdy steel construction Weld-on installation Specs: Height: 20" from bottom of footplate to top of jack Travel: 18" 1-3/16" From center of hole to center of hole Drop leg width: 1-1/4" Mounting bracket dimensions: 8" long x 1-1/2" wide Footplate diameter: 5-1/4" Lift capacity: 2,000 lbs 1-Year warranty Note: This jack is designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer.
Minimize chassis movement in your fifth-wheel RV with this jack stabilizer kit. Attach the telescoping tubes to your jacks and position them in place to brace your trailer frame. Includes 4 stabilizers for use at front of camper and 2 for the rear.Features: Helps to stabilize your 5th-wheel RV and eliminate unwanted chassis movement Stabilizer bars form triangles at front and rear jacks to prevent shaking and swaying Installs easily on 5th-wheel campers Bolts onto C-channel, I-beam or H-beam trailer frames - no welding required Attaches to traditional stabilizer jacks, scissor jacks, and/or landing gear - adapters for electric and hydraulic jacks sold separately Telescopes for perfect fit Locks securely in place with simple twist of T-handle Bolt-on installation - no welding required One end of each stabilizer tube attaches to each landing gear leg and the other end attaches to the RV frame Includes: 6 Stabilizer outer tubes 6 Stabilizer inner tubes 2 Clevis brackets 6 Stiffening pads 4 Spacer mounts 6 T-bolts 4 Flanged bushings 30 Nuts 48 Washers 18 Hex cap screws 10 Swing bolts 2 Silver bullet lifting handles 2 Hex nuts 8 Hex washer heads 1 Warning sticker for jacks Application: 5th-wheel trailers with 58" or more between front landing gear legs 1-Year warranty
Minimize chassis movement in your travel trailer with this jack stabilizer kit. Attach the telescoping tubes to your jacks and position them in place to brace your trailer frame. Includes 4 stabilizers for use at front of camper and 2 for the rear.Features: Helps to stabilize your travel trailer and eliminate unwanted chassis movement Stabilizer bars form triangles at front and rear jacks to prevent shaking and swaying Installs easily on travel trailers Bolts onto C-channel, I-beam, or H-beam trailer frames - no welding required Attaches to traditional stabilizer jacks, scissor jacks, and/or landing gear - adapters for electric and hydraulic jacks sold separately Telescopes for perfect fit Locks securely in place with simple twist of T-handle Includes: 6 Stabilizer outer tubes 6 Stabilizer inner tubes 6 Stiffening pads 4 Spacer mounts 6 T-bolts 30 Nuts 48 Washers 18 Hex cap screws 12 Swing bolts 8 Hex washer heads 1-Year warranty
With twice the lift of other jacks in its class, this one is ideal for trailers that sit high off the ground. Footplate stabilizes better than a caster wheel. Marine-grade, zinc finish is perfect for boat trailers. ... The environment this test creates is much harsher than anything you'll ever experience in your journeys, but it provides a testament to how well this jack resists rust and corrosion. How to Determine the Lift Capacity You Need in a Jack A trailer jack lifts your trailer tongue high enough to allow you to couple it with your vehicle.
This jack's footplate is more stable than that caster wheel and block you're using. Premium zinc finish has a 500-hour salt spray rating - great for trailers near saltwater. ... The environment this test creates is much harsher than anything you'll ever experience in your journeys, but it provides a testament to how well this jack resists rust and corrosion. How to Determine the Lift Capacity You Need in a Jack A trailer jack lifts your trailer high enough at the tongue to allow you to couple it with your vehicle.
Tired of cranking your stabilizers by hand? This double leg stabilizer kit lets you use a power drill to get set up faster, giving you a quick and easy way to steady your RV so you can spend more time relaxing at your campsite.The adjustable legs let you set the proper height and angle, and the safety guidance recommends positioning the telescoping leg as close to vertical as possible for maximum stability. Keep Manual Operation as a Backup Power drill operation is the quick setup method, but you can still operate the stabilizer manually if a drill is not available.
Tired of cranking your stabilizers by hand? This single leg stabilizer kit lets you use a power drill to get set up faster, giving you a quick and easy way to steady your RV so you can spend more time relaxing at your campsite.The adjustable leg lets you set the proper height and angle, and the safety guidance recommends positioning the telescoping leg as close to vertical as possible for maximum stability. Keep Manual Operation as a Backup Power drill operation is the quick setup method, but you can still operate the stabilizer manually if a drill is not available.
Heavy-duty jacks stabilize your lightweight cargo or camper trailer. Legs telescope to the ground when you release the lever. Jacks swing up for storage. ... Do not use these jacks to lift your trailer or RV. Doing so will exceed the capacity of the jacks.
If you wrench on a lifted Jeep, Bronco, UTV, or other high-clearance rig, conventional stands may not reach. The Tallboy supports up to 6 tons across seven positions from 10-13/16" to 28-3/4", then breaks down into a compact travel bag.Its modular extension tubes let you configure the stand around the support point, giving you one setup that can work across substantially different heights. Support the Load and Move Your Jack The Tallboy jack stand complements Power Mountain's Tallboy bottlejacks by taking over the support job after the load is raised.
Replace your RVs grab handle with a proper handrail that feels like your staircase at home. The lengthy 54" rail helps stabilize you from the first step. Folds flat against your RV with a sleek, low-profile look that won't obstruct the door.Features: Telescoping handrail replaces the stock grab handle to give you something that's easier to reach Extends 42-1/2" out from your RV to give you 54" of total rail length Fixed angle is sturdy and designed to be nearly parallel to MORryde StepAbove RV steps Folds up flat against your trailer and stays in place with a strong magnet Does not block your door when not in use Installs easily on the exterior of your RV with included mounting brackets and screws 2 Upper brackets ensure screw holes from old handle are covered Black powder-coated steel construction is rust resistant Specs: Rail length: 54" Extends 42-1/2" from your RV wall Weight: 12 lbs Magnet force: 120 lbs Mounting bracket lengths: Shorter bracket: 14" Longer bracket: 36" 1-Year warranty Note: Intended for 5th wheels and travel trailers with flat, fiberglass walls.
Designed for motorhomes, this telescoping rail replaces the small grab handle by your door. The 3' rail gives you extra stability on your steps. Folds flat against the wall with a sleek, low-profile look that won't obstruct the door.Features: Telescoping handrail replaces the stock grab handle to give you something that's easier to reach Extends 16" out from your RV to give you 36" of total rail length Folds up flat against your trailer and stays in place with a strong magnet Does not block your door when not in use Installs easily on the exterior of your motorhome with included hardware Black powder-coated steel construction is rust resistant Specs: Overall dimensions (folded): 2-1/2" long x 2-1/4" wide x 28" tall Rail length: 36" Extends 16" from your RV wall Magnet force: 120 lbs 1-Year warranty
If you only have a couple steps up outside your RV door, this shorter telescoping handrail will be a better size. The 48" rail folds flat against your RV with a sleek, low-profile look that won't obstruct the door.Features: Telescoping handrail replaces the stock grab handle to give you something that's easier to reach Extends 34" out from your RV to give you 48" of total rail length Fixed angle is sturdy and designed to be nearly parallel to MORryde StepAbove RV steps Folds up flat against your trailer and stays in place with a strong magnet Does not block your door when not in use Installs easily on the exterior of your RV with included mounting bracket and screws Black powder-coated steel construction is rust resistant Specs: Overall dimensions (folded): 2" long x 5-5/8" wide x 31" tall Upper bracket dimensions: 1-1/2" long x 2-3/16" wide x 2-15/16" tall Rail length: 48" Extends 34" from your RV wall Magnet force: 120 lbs 1-Year warranty Note: Intended for 5th wheels and travel trailers with flat, fiberglass walls.
Telescope this ladder out so you can quickly, yet safely, grab some luggage, seasonal decorations, or sentimental keepsakes from your attic. ... Features: Quick access to your attic - Ladder effortlessly telescopes down from your attic door Easy to extend and retract - Adjustable, spring-loaded design has a release mechanism No straining to reach the ladder - Long pull cord makes your attic door more accessible Safe to climb - Ribbed silicone feet keep the ladder from shifting on the floor Light enough to lift - Rustproof, lightweight, aircraft-grade aluminum frame Attaches to attic door or loft ledge - Includes hardware, mounting plate, and retainer belts Specs: Floor-to-ceiling clearance required: 8' to 10' Ladder height: Fully extended: 9-3/8' Fully retracted: 31" Overall ladder width: 19" Minimum attic opening size required: 37" long x 24" wide Minimum mounting clearance between joists in ceiling: 22-1/2" x 37" Weight capacity: 300 lbs Ladder extension must sit at a 75-degree angle to achieve maximum capacity Ladder rating: type 1A Specifications: OSHA compliant and ANSI 14.2 tested 1-Year limited warranty Additional parts you may need: Piano hinge (not included) may be needed to help support the ladder's weight EASY TO USE - This telescoping, spring-loaded ladder gives you easy, hassle-free access your attic so you can grab luggage for an upcoming trip or unbox decorations for the holiday season.
This telescoping ladder will provide you with a safe, steady climb every time you need to access your RV roof or the gutters at home. The ladder retracts slowly to prevent pinched fingers and can be tucked away in a smaller cargo compartment.This telescoping ladder is easy and quick to set up - simply extend the rungs from the top until they lock into place, and you'll be ready to access those hard-to-reach spots!
This telescoping ladder will provide you with a safe, steady climb every time you need to access your RV roof or the gutters at home. The ladder retracts slowly to prevent pinched fingers and can be tucked away in a smaller cargo compartment.This telescoping ladder is easy and quick to set up - simply extend the rungs from the top until they lock into place, and you'll be ready to access those hard-to-reach spots!
Filters
