Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
For the LCI52-SB-86.5-68.5, the two ending measurements are: 1st - measurement from hub to hub, meaning the length of the axle in this case is 86.5 inches. 2nd - spring seat dimension where they're welded, meaning the spring seats are 68.5 inches…
view full answer...The closest seals we have to your measurements are the Seal #TMK29ZR (I.D. 1.750" / O.D. 2.565") and Seals #RG06-050 (1.719" / OD 2.565"). The #RG06-050 is the most common size found on 3,500lb axles. If you are unsure of the…
view full answer...Since you have the Lippert Edge awning on your 2022 Coleman Lantern 17B, you'll need the following cover: Replacement Front Cover #LC32NJ Also just incase you find damage to the back cover, the replacement back cover is #LC43UD.
view full answer...The number on the lens is not a part number. It is a rating for the lens/light. Based on that number it looks like the best match we have is #A31RB which is rated SAE AP2 86. The A in the number just means that it has a built-in reflector.
view full answer...The easiest way to tell the difference between the 2007 Chevy Silverado Classic and New Body Style is the tail gate or the tail lights. The new body style will have a large Chevy bow tie emblem in the center of the tail gate. It will also have red…
view full answer...Since both a ST145/R12 size tire, like the Kenda Karrier S-Trail #AM10130, and a 5.30-12 size tire, like the Kenda K353 #AM10068, fit a 12 inch wheel, a ST145/R12 size tire can replace a 5.30-12 size tire. Keep in mind that these tires do have…
view full answer...Due to the light weight of your trailer and boat I recommend looking at the Timbren Silent Ride Suspension for Single Axle Trailers. There are a few kits available based on the dimensions of your axle tube. This suspension is superior to leaf springs…
view full answer...There are a number of factors involved when converting a semi 7-way to an RV 7-way. Semis generally use a 7-pin round pin socket, similar to #PK11720. And RV style 7-way uses blades, like #PK12706. We do not offer any pre-made adapters to make this…
view full answer...It is likely that you will need a lug nut like the Lionshead Trailer Wheel Lug Nut #LHLR110 that threads onto 9/16"-18 lug bolts. You may also have 5/8" studs. The wheel itself does not determine the necessary lug nut size. The best way to…
view full answer...Brake parts are manufactured with one of several different finishes - raw metal, e-coat, silver cadmium, or Dacromet or they are made entirely of stainless steel. Parts vary in price and in the degree of resistance to corrosion, depending on the…
view full answer...Yes, so long as your axle is a Dexter axle, your Dexter brakes can be replaced by the Kodiak Disc Brake Kit - 13" Rotor - 8 on 6-1/2 - Dacromet - 5/8" Bolts - 8K Dexter Axle #K2R858DD.
view full answer...The Sealed, 2" Round Trailer Clearance and Side Marker Light, Flush Mount - Amber #MC53AB or the LED #MCL55AB will use the 2" Round Grommet - Flush Mount - Open Back #A54GB for installation. You will also require the wiring pigtail #A46PB…
view full answer...Filters
4762 results
Vehicle Fit
Fit 2006 Ford Ranger