7-1/8" Incandescent transit light acts as a brake and taillight. Mounts to the surface of your bus or truck and hardwires to your vehicle. The included gasket creates a weathertight seal against moisture.Features: Round stop/taillight Incandescent bulb is easy to replace Red screw-on lens Steel housing Foam gasket creates a weathertight seal Surfacemount - hardware not included Power lead and ground wire connect to your vehicle Specs: Dimensions: 7-1/8" diameter x 2-3/16" thick Distance between mounting holes (center on center): 6-1/4" Compatible with 12V DC systems Bulb type: 1157 Power draw at 12.8 volts: Stop: 2.4 amps Tail: 0.5 amps 3-Year warranty
This GloLight transit taillight is bright, easy to see, and just looks cool. It seals out moisture with the weathertight gasket. Mounts on the surface of your vehicle with screws (not included). ... Features: Halo taillight is bright and easy to see, day or night Inner ring glows for taillight Outer ring flashes for turn signal and brightens for brake light Weather resistant Included gasket creates weathertight seal Built-in reflex reflector White LEDs with red lens More efficient and durable than incandescent bulbs Durable polycarbonate housing and acrylic lens Surfacemount Hardware not included AMP-style plug DOT compliant Meets FMVSS 108 and CMVSS requirements Specs: Dimensions: 7" wide x 7" tall x 1-5/8" thick Compatible with 12V DC systems Diodes: 32 Power draw at 12V: Tail: 0.135 amps Stop/turn: 0.340 amps Lifetime warranty on LEDs
8-11/16" Low-profile, LED taillight displays brake, tail, and turn signals on the passenger side of your RV. It mounts to the surface of the motorhome, with a lens that snaps on so it's easy to replace the bulb. ... Features: Low-profile rectangular RV brake, turn, and taillight White LEDs with red lens More efficient and durable than incandescent bulbs Black ABS plastic base and snap-on lens Surfacemount Hardware not included 3-Wire pigtail White wire for ground Black wire for taillight Green wire for stop/turn signal light DOT compliant Meets FMVSS 108 and CMVSS 108 requirements Specs: Configuration: passenger side Driver side: RVSTLB61 (sold separately) Light dimensions: 8-11/16" long x 3-3/16" tall x 2-1/8" thick Compatible with 12V DC systems Diodes: 9 Power draw at 12.8V: Stop/turn: 0.243 amps Tail: 0.046 amps Lifetime warranty on LEDs
8-5/8" LED light displays brake, tail, and turn signals on the passenger side of your RV. It mounts to the surface of the motorhome and has a replaceable lens. ... Features: Rectangular RV brake, turn, and taillight Glows for taillight Brightens for brake light Flashes for turn signal LED with red lens More efficient and durable than incandescent bulb ABS plastic base and replaceable acrylic lens Surfacemount with bracket (sold separately) Hardware not included 3-Wire pigtail White wire for ground Black wire for taillight Green wire for stop/turn signal light DOT compliant Meets FMVSS 108 and CMVSS 108 requirements Specs: Configuration: passenger's side (right-hand side) Driver's-side light: RVSTLB0061 (sold separately) Light dimensions: 8-5/8" long x 3-3/16" tall x 2-1/4" thick Compatible with 12V DC systems Diodes: 1 Power draw at 12.8 volts: Stop/turn signal light: 0.32 amps Taillight: 0.01 amps Lifetime warranty on LEDs
18" Low-profile, LED taillight displays brake, tail, and turn signals on your RV that's over 80" wide. It mounts on the surface of the motorhome and hardwires with the included pigtail harness.Features: Low-profile RV brake, turn, and taillight Weatherproof White LEDs with red lens More efficient and durable than incandescent bulbs Polycarbonate lens and housing Mounts on surface of trailer Hardware not included Can be mounted in vertical or horizontal orientation 3-Wire pigtail White wire for ground Red wire for brake light Black wire for taillight DOT and SAE compliant Specs: For motorhomes that are over 80" wide Dimensions: 18" long x 1-1/2" tall x 3/4" thick Distance between mounting holes (center on center): 15-7/8" Diodes: 20 2-Year warranty
12-3/4" Low-profile, LED taillight displays brake, tail, and turn signals on your RV that's under 80" wide. It mounts on the surface of the motorhome and hardwires with the included pigtail harness.Features: Low-profile RV brake, turn, and taillight Weatherproof White LEDs with red lens More efficient and durable than incandescent bulbs Polycarbonate lens and housing Surfacemount Hardware not included Can be mounted in vertical or horizontal orientation 3-Wire pigtail White wire for ground Red wire for brake light Black wire for taillight DOT and SAE compliant Specs: For motorhomes that are under 80" wide Dimensions: 12-3/4" long x 1-1/2" tall x 3/4" thick Distance between mounting holes (center on center): 11-1/2" Diodes: 20 2-Year warranty
5-15/16" Low-profile RV light displays brake, tail, and turn signals on the passenger side. It mounts on the surface of your motorhome and hardwires to the RV with the 3-wire pigtail.Features: Low-profile brake, tail, and turn signal light for RVs Glows for taillight Brightens for brake light Flashes for turn signal White LEDs with red lens More efficient and durable than incandescent bulbs ABS plastic base with acrylic lens Surfacemount Hardware not included 3-Wire pigtail hardwires to trailer DOT compliant Specs: Configuration: passenger side Driver side: RVSTL11 (sold separately) Light dimensions: 5-15/16" diameter x 1-5/16" thick Compatible with 12V DC systems Diodes: 6 Power draw at 12.8 volts: Stop/turn: 0.421 amps Tail: 0.114 amps Lifetime warranty on LEDs
8-5/8" RV light displays brake, tail, and turn signals on the passenger side. It mounts to the surface of the motorhome and wires to the RV.Features: Rectangular RV brake, turn, and taillight White LED with red lens More efficient and durable than incandescent bulbs White ABS plastic base and acrylic lens Surfacemount Hardware not included 3-Wire pigtail White wire for ground Black wire for taillight Green wire for stop/turn signal light DOT compliant Meets FMVSS 108 and CMVSS 108 requirements Specs: Configuration: passenger's side (right-hand side) Driver's-side light: RVSTL0061 (sold separately) Light dimensions: 8-5/8" long x 3-3/16" tall x 2-1/4" thick Power draw at 12.8 volts: Stop/turn signal light: 0.32 amps Taillight: 0.01 amps Lifetime warranty on LEDs
This red GloLight is bright, easy to see, waterproof, and just looks cool. The outer band is a taillight and the center LEDs are a turn signal and brake light. Mounts to the surface of the trailer with the built-in flange, and hardwires to trailer.Features: Halo taillight is bright and easy to see, day or night Outer band functions as taillight Center flashes for turn signal Both brightens for brake light Waterproof - great for boat trailers White LEDs with red lens More efficient and durable than incandescent bulbs Polycarbonate housing and acrylic lens Surfacemount with built-in flange Hardware not included 3-Wire pigtail hardwires into trailer Black wire for taillight Red wire for brake and turn signal White wire for ground DOT compliant Meets FMVSS 108 and CMVSS requirements Specs: Overall dimensions: 7-1/2" wide x 3-5/16" tall x 1-1/8" thick Light face dimensions: 6-7/16" wide x 2-5/16" tall x 15/16" thick Light extends 3/4" out from trailer Diodes: 22 Power draw at 12.8 volts: Taillight: 0.295 amps Brake/turn signal light: 0.59 amps Lifetime warranty on LEDs
5-3/8" Waterproof light with built-in rear reflex reflector displays brake, tail, and turn signals on your trailer. Mounts on the surface of the trailer and hardwires with the 3-wire pigtail harness.Features: Round brake, tail, and turn signal light Built-in rear reflex reflector Waterproof - great for boat trailers White LEDs with red lens More efficient and durable than incandescent bulbs Polycarbonate base with acrylic lens Surfacemount with built-in flange Hardware not included 3-Wire pigtail harness hardwires to the trailer White wire for ground Brown wire for taillights Red wire for stop and turn lights DOT and SAE compliant Meets FMVSS 108 requirements Assembled in the USA Specs: Dimensions: 5-3/8" diameter x 5/8" thick Compatible with 12V DC systems Diodes: 20 Operating voltage: 9V-16V DC Wire length: 7" 1-Year limited warranty
7-9/16" Waterproof light displays brake, tail, and turn signals on your trailer, and mounts to the surface with the built-in flange so you don't need to cut a hole in your trailer. ... Features: Oval brake, tail, and turn signal light Glows for taillight Brightens for brake light Flashes for turn signal Waterproof - great for boat trailers White LEDs with red lens More efficient and durable than incandescent bulbs Polycarbonate housing and lens Surfacemount with built-in flange Hardware not included Optional snap-on reflector trim ring: A78RXB (sold separately) 3-Wire pigtail hardwires to trailer DOT compliant Specs: Overall dimensions: 7-9/16" long x 3-5/16" tall x 3/4" thick Light dimensions: 6-1/2" tall x 2" wide Distance between mounting holes (center on center): Horizontal: 7" Vertical: 2-3/4" Compatible with 12V DC systems Diodes: 6 Power draw at 12 volts: Brake/turn: 0.161 amps Tail: 0.007 amps Lifetime warranty on LEDs How to Mount Trailer Light This light is a surface-mount, meaning it installs flat against the surface of the trailer instead of through a cutout.
11" Weatherproof light displays brake, tail, and turn signals on your trailer. Built-in reflector increases light output. Mounts on the surface of your trailer and hardwires with the included pigtail harness.Features: Rectangular brake, tail, and turn signal light Glows for taillight Brightens for brake light Flashes for turn signal light Built-in reflective lens increases light output White LEDs with red lens More efficient and durable than incandescent bulbs Weatherproof polycarbonate lens and housing Surfacemount to trailer Hardware not included 6-Wire pigtail harness hardwires to trailer DOT and SAE compliant Specs: Dimensions: 11" long x 8" tall x 1-1/4" thick Diodes: 80 1-Year warranty
5-5/8" Waterproof LED light displays brake, tail, and turn signals on your trailer. It mounts to the surface of your trailer with the built-in flange that doubles as a reflector and hardwires with the 3-wire pigtail harness.Features: Round brake, tail, and turn signal light Glows for taillight Brightens for brake light Flashes for turn signal Built-in reflex reflector Waterproof - great for boat trailers White LEDs with red lens More efficient and durable than incandescent bulbs Polycarbonate lens and housing Surfacemount with built-in flange Hardware not included 3-Wire pigtail hardwires to trailer FMVSS compliant for trailers under 80" wide Specs: Overall dimensions: 5-5/8" diameter x 3/4" thick Light face: 4" diameter Diodes: 7 Wire length: 6" Power draw at 12.8 volts: 0.033 amps Lifetime warranty on LEDs
7-1/2" Waterproof light with a built-in reflex reflector displays brake, tail, and turn signals on you trailer. The reflector doubles as a flange for mounting. ... Features: Oval brake, tail, and turn signal Built-in rear reflex reflector Waterproof - great for boat trailers White LEDs with red lens More efficient and durable than incandescent bulbs Low-voltage design is super efficient Polycarbonate base and acrylic lens Surfacemount with built-in flange Hardware not included Can be mounted horizontally or vertically 3-Wire pigtail White wire for ground Brown wire for taillights Red wire for stop and turn lights DOT and SAE compliant Meets FMVSS 108 requirements Assembled in the USA Specs: Dimensions: 7-1/2" long x 3-1/4" wide x 11/16" thick Compatible with 12V DC systems Diodes: 22 Operating voltage: 9V-16V DC Wire length: 7" 1-Year limited warranty
Back up to the campsite and your signals pop - this slim 6" oval lightmounts to standard holes and just works. Sealed, UV tough, and ready for rain, it keeps you visible so setup stays simple and safe.Features: Stop/Tail/Turn LED with smooth surface, low-profile face Surface-mount design fits industry-standard 6" oval applications Mount horizontal, vertical, or at any angle and remain DOT compliant Impact-resistant, UV-stable automotive-grade polycarbonate lens TecSeal urethane potting protects the circuit board IP68 hermetic seal - dustproof and waterproof Meets FMVSS 108 requirements for wide and narrow vehicles Rated for reliable performance over 100,000 hours Tri-Pole connector; fits standard mounting holes Specs: Dimensions (surfacemount): 7-9/16" long x 3-5/16" wide x 1-1/2" deep LEDs: 6 Voltage: 9-14 VDC Current (red lens): 0.17 A to 0.28 A Connector: Tri-Pole Wiring: White - Ground, Red - High/Turn, Black - Low/Dim Mounting orientation: horizontal, vertical, or any angle Ingress protection: IP68 Lens material: automotive exterior lighting grade polycarbonate with UV resistance Compliance: FMVSS 108 Service life: rated over 100,000 hours Mounting pattern: fits standard 6" oval holes (surfacemount) Lifetime warranty TecNiq has introduced a line of 6" oval stop and turn taillights that can be mounted at any angle for DOT compliance.
Back up to the campsite and your signals pop - this slim 6" oval lightmounts to standard holes and just works. Sealed, UV tough, and ready for rain, it keeps you visible so setup stays simple and safe.Features: Stop/Tail/Turn LED with smooth surface, low-profile face Surface-mount design fits industry-standard 6" oval applications Mount horizontal, vertical, or at any angle and remain DOT compliant Impact-resistant, UV-stable automotive-grade polycarbonate lens TecSeal urethane potting protects the circuit board IP68 hermetic seal - dustproof and waterproof Meets FMVSS 108 requirements for wide and narrow vehicles Rated for reliable performance over 100,000 hours Wiring pigtail included Fits standard mounting holes Specs: Dimensions (surfacemount): 7-9/16" L x 3-5/16" W x 1-1/2" D LEDs: 6 Voltage: 9-14 VDC Current (red lens): 0.17 A to 0.28 A Connector: 9" wiring pigtail Wiring: White - Ground, Red - High/Turn, Black - Low/Dim Mounting orientation: horizontal, vertical, or any angle Ingress protection: IP68 Lens material: automotive exterior lighting grade polycarbonate with UV resistance Compliance: FMVSS 108 Service life: rated over 100,000 hours Mounting pattern: fits standard 6" oval holes (surfacemount) TecNiq has introduced a line of 6" oval stop and turn taillights.
7" LED brake, tail, and turn signal light seals out moisture with the included weathertight gasket. Mounts on the surface of your truck or bus with screws (not included) and plugs in with bullet connectors and a ground wire.Features: Round brake, tail, and turn signal light Weather resistant Included gasket creates weathertight seal White LEDs with red lens More efficient and durable than incandescent bulbs Potted circuit board for additional protection Sealed polycarbonate lens and housing (2) 0.180 Male bullet connectors plug into your vehicle's matching connectors Ring terminal included for ground Specs: Overall dimensions: 7" diameter x 1-1/2" thick Diodes: 17 Limited lifetime warranty
5-1/2" LED displays brake, tail, and turn signals. The integrated voltage regulator ensures there is consistent light output without overheating. Mounts on the surface of the trailer with the built-in flange and works with AMP-style plugs.Features: Round brake, tail, and turn signal light Glows for taillight Brightens for brake light Flashes for turn signal White LEDs with red lens More efficient and durable than incandescent bulbs Integrated voltage regulator ensures consistent light output without overheating Skirted weld joint blocks moisture Surfacemount with built-in flange Hardware not included Requires a 4-1/2" cutout AMP-style plug required (417-49 - sold separately) DOT compliant Meets FMVSS 108 requirements Made in the USA Specs: Overall dimensions: 5-1/2" diameter x 1-3/8" thick Light face: 4-1/4" diameter Distance between mounting holes (center on center): 4-1/4" Diodes: 7 Power draw at 12 volts: Stop/turn: 0.37 amps Tail: 0.01 amps Operating voltage: 9V - 16V Limited lifetime warranty What Wiring Do I Need?
Steel mounting bracket allows you to surfacemount most Peterson stud mounttaillights.Features: Steel mounting bracket allows you to surfacemount most Peterson stud mounttaillights Durable powder-coat finish resists corrosion Suface mount design - bracket attaches to trailer Made in the USA Specs: Dimensions: 4-1/2" long x 3" wide x 2-1/8" thick Distance between mounting holes (center on center): 1-3/4"
Plastic mounting bracket allows you to surfacemount most Peterson stud mounttaillights.Features: Mounting bracket allows you to surfacemount most Peterson stud mounttaillights Durable plastic construction flexes with impacts Suface mount design - bracket attaches to trailer Made in the USA Specs: Long bar measures 8-1/2" long Center bracket measures 2-3/4" wide
This flat bracket allows you to surfacemount an Optronics 6" oval trailer taillight with no panel cutout required. Durable steel construction.Features: Flat mounting bracket allows you to surfacemount an Optronics 6" oval trailer light Durable steel construction Surfacemount to trailer frame - no cutout required Requires a grommet (A70GB - sold separately) to mount recess flange mountlights Specs: Dimensions: 8-1/4" wide x 5-3/4" tall x 1/16" thick 3-Year limited warranty
7-9/16" x 3-5/16" Oval. 3-Function, waterproof LED light acts as brake, tail, and turn signal. Durable polycarbonate housing and lens. Surfacemount with built-in flange - hardware not included. 3-Wire design.The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board. Surface-MountLightSurface-mountlights install flat against the surface of the trailer, so a hole does not need to be cut into the trailer for the light.
7" LED turn signal and parking light seals out moisture with the included weathertight gasket. Hardwires to your truck or bus, and mounts on the surface with screws (not included).Features: Round turn signal/parking light Brightens for parking light Flashes for turn signal Weather resistant Included gasket creates weathertight seal LEDs with amber lens More efficient and durable than incandescent bulbs Surfacemount - hardware not included Hardwires to your truck or bus DOT compliant Meets FMVSS 108 requirements Specs: Dimensions: 7" diameter x 1-7/16" thick Distance between mounting holes: 6-1/4" Compatible with 24V DC systems Diodes: 31 Power draw: Stop/turn: 0.243 amps Tail: 0.046 amps Lifetime warranty on LEDs
An over 80" ID bar and white load light built into one housing. Keep wide trailers properly marked on the road or switch on bright white light for backing into tight spots, loading equipment, or setting up at camp after dark.Sealed Against Water And Dust: IP68-rated housing stands up to road spray and weather. Low-Profile SurfaceMount: Secures with 2 screws and snap-on covers conceal the hardware. Simple 3-Wire Hookup: 9" pigtail with dedicated ground, load, and tail circuits.
Filters
