Upgrade the strength and durability of your stabilizer jack feet by adding these permanent SnapJack feet to the bottom. Increased surface area creates a more robust footprint compared to a standard foot. Ideal for sloped or uneven surfaces.Features: SnapJack foot improves the stability of your stabilizer jack (sold separately) Thicker and stronger than standard feet Improved stability and grip on uneven terrain Anti-slip base pads are made from a durable recycled rubber Withstands heavy-duty use for years to come Prevents slippage when stabilizing your camper Provides significantly more grip compared to using wooden blocks Added height on the SnapJack feet prevents the stabilizers from being over-extended Includes all hardware to install SnapJack feet to stabilizers Made in the USA Specs: Applications: Lippert PSX1 Lippert PSX2 Lippert Quick Drop Stabilizer Rock Solid Stabilizer Systems Quantity: 4 feet Overall dimensions: 8" wide x 8" long x 2-3/4" tall Foot dimensions: 5-1/2" diameter x 1/4" tall Weight: 5.4 lbs each 2-Year limited warranty
A 3-piece design makes this an all-around performer. The rubber top and base are grippy and stable, while the plastic core supports over 40,000 lbs. Supports trailer jacks and stabilizers or can be used as leveling blocks for even the largest RVs.Features: Universal jack pads use both rubber and plastic for stability and toughness Position beneath jacks, stabilizers or trailer wheels Individual layers can be separated for a variety of configurations Remove rubber pieces to allow cores to interlock with each other Stack them in a column or as a pyramid for RV leveling Grab handle built in Specs: Quantity: 1 block Individual block dimensions: 12" long x 12" wide x 2" high 1-3/4" tall without top rubber installed Extra cores add 1-1/2" height when stacked Weight: 7.6 lbs Weight capacity: 40,000 lbs 2-Year limited warranty Note: When in use, place the handle to the side, not where the tire will be driving on or off.
A 3-piece design makes this an all-around performer. The rubber top and base are grippy and stable, while the plastic core supports over 40,000 lbs. Supports trailer jacks and stabilizers or can be used as leveling blocks for even the largest RVs.Features: Universal jack pads use both rubber and plastic for stability and toughness Position beneath jacks, stabilizers or trailer wheels Individual layers can be separated for a variety of configurations Remove rubber pieces to allow cores to interlock with each other Stack them in a column or as a pyramid for RV leveling Grab handle built in Specs: Quantity: 1 block Individual block dimensions: 12" long x 12" wide x 2" high 1-3/4" tall without top rubber installed Extra cores add 1-1/2" height when stacked Weight: 7.6 lbs Weight capacity: 40,000 lbs 2-Year limited warranty Note: When in use, place the handle to the side, not where the tire will be driving on or off.
A 3-piece design makes this an all-around performer. The rubber top and base are grippy and stable, while the plastic core supports over 40,000 lbs. Supports trailer jacks and stabilizers or can be used as leveling blocks for even the largest RVs.Features: Universal jack pads use both rubber and plastic for stability and toughness Position beneath jacks, stabilizers or trailer wheels Individual layers can be separated for a variety of configurations Remove rubber pieces to allow cores to interlock with each other Stack them in a column or as a pyramid for RV leveling Grab handle built in Specs: Quantity: 1 block Individual block dimensions: 12" long x 12" wide x 2" high 1-3/4" tall without top rubber installed Extra cores add 1-1/2" height when stacked Weight: 7.6 lbs Weight capacity: 40,000 lbs 2-Year limited warranty Note: When in use, place the handle to the side, not where the tire will be driving on or off.
A 3-piece design makes this an all-around performer. The rubber top and base are grippy and stable, while the plastic core supports over 40,000 lbs. Supports trailer jacks and stabilizers or can be used as leveling blocks for even the largest RVs.Features: Universal jack pads use both rubber and plastic for stability and toughness Position beneath jacks, stabilizers or trailer wheels Individual layers can be separated for a variety of configurations Remove rubber pieces to allow cores to interlock with each other Stack them in a column or as a pyramid for RV leveling Grab handle built in Specs: Quantity: 1 block Individual block dimensions: 12" long x 12" wide x 2" high 1-3/4" tall without top rubber installed Extra cores add 1-1/2" height when stacked Weight: 7.6 lbs Weight capacity: 40,000 lbs 2-Year limited warranty Note: When in use, place the handle to the side, not where the tire will be driving on or off.
These leveling scissor jacks with a 5,000-lb combined capacity will keep your RV level and stable. They adjust from 5" to 23-3/4" as your application requires. Includes SnapJack feet for improved stability and grip on uneven terrain.
Hey Angela, you’re thinking about this exactly the right way. Electric tongue jacks are sized based on tongue weight, not total trailer weight. With your 750–800 lb tongue weight, the 3,500 lb models of our etrailer electric trailer jacks #e72QV or…
Hey Steve, Yes The Big Truck Big Rv Scale #BTBRV004 is hydraulically operated to measure the tongue weight. No electronics or springs inside of it, overall a great scale. What kind of trailer are you towing?
You are correct that in the Blue Ox SwayPro Owner's Manual they do recommend use molybdenum grease on both the hitch ball and the spring bars. The LubriMatic Moly EP Grease #LM54FR in a grease gun, such as #L30480, will work well. You could use…
Hey Eric! There has definitely been some confusion around the specs on this scale. I just contacted B&W and can confirm that the B&W Digital Tongue Weight Scale w/ LED Screen #BW34KR has a max capacity of 4,000 lbs. It has been listed on our…
Yes, as a matter of fact we have just what you need. The Replacement Hydraulic Jack Assembly for Lippert Level Up System #LC99ED is the Lippert 236560 part you mentioned. This jack has a maximum weight capacity of 14,00lbs, and measures 21-7/8"…
Hi Douglas; thank you for providing that information down below. What you have now is the 25712510. The correct replacement leg is the Replacement Hydraulic Jack Assembly for Lippert 5th Wheel RV Leveling System - 14,000 lbs - Gen 1 #LC25AF. The…
The MaxxAir II RV and Enclosed Trailer Roof Vent Cover #MA86JR and the Fan-Tastic Vent Ultra Breeze Trailer Roof Vent Cover #DMC38FR have very similar dimensions so I doubt anyone would be able to notice any difference in actual ventilation…
Hello Larry; are you sure the brackets are 18" across as seen in the picture below? Looking at the parts listed from Grand Design the Reflection 362TBS has the MaxxFan 4951. This will have the mounting tabs that allow you to mount the MaxxAir…
Hey Keith, The Furrion Tankless #FR93FR will fit into that cutout you have and be a good replacement. The water heater itself is 12-5/6 x 12-5/8 fitting nicely into your 13 x13 cutout. The depth of the heater itself is 19-1/4 which should fit nicely.…
Yes, for your 2018 Ford F-150 a Timbren like the part #TFR1504E (which is a custom fit for your truck), is exactly what you need. This will give you the rear suspension support you need to greatly reduce sag when you have your truck bed loaded or if…
Currently the Reese Goose Box 5th-Wheel-to-Gooseneck Air Ride Coupler Adapter #RP85FR is the only adapter Lippert approves for use which will not void the Lippert Limited Frame Warranty. This information can be found in the Lippert document…
Hey Fraser, yes the Dometic thermostat part #DMC83ZR that you referenced is correct for you to use when adding the Dometic Freshjet 3 part #DMC49ZR. This thermostat had furnace controls as well.
If you've ever guessed at your trailer's tongue weight and hoped for the best, you're not alone. This compact scale gives you a quick, one-handed way to check weight at the coupler. It even comes with a SnapPad for added grip.Specs Compatibility Fits 1-7/8", 2", and 2-5/16" ball couplers Includes 6" SnapPad (SN47FR) Capacity Maximum weight: 2,000 lbs Adjustability Max height: 20-3/4" Min height: 14-3/4" Adjusts in 2" increments Dimensions Footplate diameter: 6" Jack pad diameter: 7-3/4" Warranty Limited lifetime
Manual jacks get old fast when you're trying to hitch up or level. This 5,000 lb electric A-frame jack plugs into your 7-way for push-button lifting and includes an integrated SnapPad for a wider, more stable base on soft or uneven ground.Easy Drop Leg Adjustment: Extends up to 9.75" for extra lift with pull-pin operation. SnapPad Stability Upgrade: Rubber pad increases footing and helps prevent sinking. Corrosion-Resistant Finish: E-coat and matte black powder coat help prevent rust and corrosion.
Manual jacks get old fast when you're trying to hitch up or level. This 3,500 lb electric A-frame jack plugs into your 7-way for push-button lifting and includes an integrated SnapPad for a wider, more stable base on soft or uneven ground.Easy Drop Leg Adjustment: Extends up to 9.75" for extra lift with pull-pin operation. SnapPad Stability Upgrade: Rubber pad increases footing and helps prevent sinking. Corrosion-Resistant Finish: E-coat and matte black powder coat help prevent rust and corrosion.
A trailer that looks fine in the driveway can fishtail at 60 MPH. This kit gives you the BTBRV 2K scale and 6" SnapPad so you can check your tongue weight fast, wherever you're parked. One quick step could save your whole trip.
A trailer that looks fine in the driveway can fishtail at 60 MPH. This kit gives you the BTBRV 1K scale and 6" SnapPad so you can check your tongue weight fast, wherever you're parked. One quick step could save your whole trip.
Your arm stalls mid-crank trying to lift a loaded trailer tongue to meet the hitch. This 2,000 lb A-frame jack uses a drill adapter so the lift happens without the handle. The coupler lines up faster, and the SnapPad stays planted on soft ground.The jack uses a round removable foot plate for base support, and the Replacement Pad for SnapPad Jack Stand Pad System - 6" Round Jack Foot locks onto that foot to increase the contact area at the ground. With that added footprint in place, the jack stays planted on gravel, grass, or sand while the trailer remains supported during loading and while it sits unhitched.
Your arm stalls mid-crank trying to lift a loaded trailer tongue to meet the hitch. This 2,000 lb swivel jack uses a drill adapter so the lift happens without the handle. It pivots up for clearance, and the SnapPad stays planted on soft ground.Specs Capacity and Lift: Maximum capacity: 2,000 lbs Maximum travel: 14" Tube Diameters: Outer tube: 2-1/4" outer diameter Inner tube: 2" outer diameter Mount Type: Swivel bolt-on Operation: Handle: sidewind, fold-down for power drill access Drill adapter: 3/4" integrated nut and 3/4" socket included Construction: Outer tube: steel with e-coat and glossy black powder coat Inner tube: steel with white zinc plating Foot plate: round, removable Included Accessories: Mounting hardware: (3) 3/8"-16 x 1" grade 5 hex bolts, (3) 3/8" flat washers, (3) 3/8"-16 grade 5 nylon lock nuts 3/4" socket for drill operation Warranty: Limited lifetime SnapPad Jack Stand Pad: Application: 6" round jack foot Diameter: 7-3/4" Overall height: 1-3/4" Height from top of foot platform to lip of pad: 3/4" Weight: 2.4 lbs Warranty: 2-Year Included Components: etrailer Manual Sidewind Trailer Jack w/ Drill Adapter - A-Frame - 14" Lift - 2K Replacement Pad for SnapPad Jack Stand Pad System - 6 Round Jack Foot
Upgrade the strength and durability of your scissor jack feet by adding this SnapJack foot. Increased surface area creates a more robust footprint compared to a standard bow-tie foot. Ideal for sloped or uneven surfaces.Features: SnapJack foot improves the stability of your scissor jack (sold separately) Thicker and stronger than standard bow-tie feet Improved stability and grip on uneven terrain Anti-slip base pads are made from a durable recycled rubber Withstands heavy-duty use for years to come Prevents slippage when stabilizing your camper Provides significantly more grip compared to using wooden blocks Added height on the SnapJack feet prevents the stabilizers from being over-extended Includes all hardware to install SnapJack feet to stabilizers Made in the USA Specs: Application: Works with most scissor jacks (excluding BAL LoPro, Lippert PSX2, and Weize 7500) Quantity: 4 feet Overall dimensions: 8-1/8" diameter x 2-3/4" tall Foot dimensions: 5-1/2" diameter x 1/4" tall Weight: 5.4 lbs each 2-Year limited warranty Note: Will not work with BAL LoPro, Lippert PSX2, or Weize 7500 scissor jacks.
Upgrade the strength and durability of your stabilizer jack feet by adding these permanent SnapJack feet to the bottom. Increased surface area creates a more robust footprint compared to a standard foot. Ideal for sloped or uneven surfaces.Features: SnapJack foot improves the stability of your stabilizer jack (sold separately) Thicker and stronger than standard feet Improved stability and grip on uneven terrain Anti-slip base pads are made from a durable recycled rubber Withstands heavy-duty use for years to come Prevents slippage when stabilizing your camper Provides significantly more grip compared to using wooden blocks Added height on the SnapJack feet prevents the stabilizers from being over-extended Includes all hardware to install SnapJack feet to stabilizers Made in the USA Specs: Applications: Lippert PSX1 Lippert PSX2 Lippert Quick Drop Stabilizer Rock Solid Stabilizer Systems Quantity: 2 feet Overall dimensions: 8" wide x 8" long x 2-3/4" tall Foot dimensions: 5-1/2" diameter x 1/4" tall Weight: 5.4 lbs each 2-Year limited warranty
Replaces 1 pad for your SnapPad jack stand pad system. Pad increases the surface area of the jack foot to help prevent sinking and provides added stability. ... Features: Replaces 1 pad for your SnapPad jack stand pad system Pad increases the surface area of the jack foot to help prevent sinking and provides added stability Made in the USA Specs: Application: 9" round jack foot Diameter: 11" Weight: 5 lbs 2-Year limited warranty
Replaces 1 pad for your SnapPad jack stand pad system. Pad increases the surface area of the jack foot to help prevent sinking and provides added stability. ... Features: Replaces 1 pad for your SnapPad jack stand pad system Pad increases the surface area of the jack foot to help prevent sinking and provides added stability Made in the USA Specs: Application: 11-1/2" or 12" round jack foot Diameter: 13-3/4" Weight: 8.4 lbs 2-Year limited warranty
Increase the surface area of your camper's leveling jack foot to help prevent sinking and to get added stability. Durable rubber pad easily and permanently snaps into place.Features: Heavy-duty rubber padsnaps onto the foot of your camper jack for extra stability Prevents sinking into soft ground Durable, heavy-duty rubber is made from recycled tires Grips uneven terrain and prevents metal foot from rusting or bending Serves as a cushion so metal foot won't crack or chip your driveway Helps dampen vibration from inside camper that could cause shifting Built-in drains release moisture to prevent jack foot from corroding Simple, one-time installation Line up the pad beneath your jack's foot and lower the foot until the lip on the pad fully engages and locks in place Made in the USA Specs: Application: 6" round jack foot Diameter: 7-3/4" Overall height: 1-3/4" Height from top of foot platform to lip of pad: 3/4" Weight: 2.4 lbs 2-Year limited warranty
Replaces 4 pads for your SnapPad jack stand pad system. Pads increase the surface area of the jack feet to help prevent sinking and provide added stability. ... Features: Replaces 4 pads for your SnapPad jack stand pad system Pads increase the surface area of the jack feet to help prevent sinking and provide added stability Made in the USA Specs: Quantity: 4 pads Application: 9" round jack feet Diameter: 11" Weight per pad: 5 lbs 2-Year limited warranty
Replaces 6 pads for your SnapPad jack stand pad system. Pads increase the surface area of the jack feet to help prevent sinking and provide added stability. 4 Pads fit 9" round jack feet. 2 Pads fit 11-1/2" or 12" round jack feet.Features: Replaces 6 pads for your SnapPad jack stand pad system Pads increase the surface area of the jack feet to help prevent sinking and provide added stability Made in the USA Specs: Total quantity: 6 pads 4 pads Application: 9" round jack feet Diameter: 11" Weight per pad: 5 lbs 2 Pads Application: 11-1/2" or 12" round jack feet Diameter: 13-3/4" Weight per pad: 8.4 lbs 2-Year limited warranty
A 3-piece design makes this an all-around performer. The rubber top and base are grippy and stable, while the plastic core supports over 40,000 lbs. Supports trailer jacks and stabilizers or can be used as leveling blocks for even the largest RVs.Features: Universal jack pads use both rubber and plastic for stability and toughness Position beneath jacks, stabilizers or trailer wheels Individual layers can be separated for a variety of configurations Remove rubber pieces to allow cores to interlock with each other Stack them in a column or as a pyramid for RV leveling Grab handle built in Specs: Quantity: 1 block Individual block dimensions: 12" long x 12" wide x 2" high 1-3/4" tall without top rubber installed Extra cores add 1-1/2" height when stacked Weight: 7.6 lbs Weight capacity: 40,000 lbs 2-Year limited warranty Note: When in use, place the handle to the side, not where the tire will be driving on or off.
Replaces 1 pad for your SnapPad jack stand pad system. Pad increases the surface area of the jack foot to help prevent sinking and provides added stability. ... Features: Replaces 1 pad for your SnapPad jack stand pad system Pad increases the surface area of the jack foot to help prevent sinking and provides added stability Made in the USA Specs: Application: 10" octagonal or round concave jack foot Diameter: 13-1/4" Weight: 8.9 lbs 2-Year limited warranty
Replaces 1 pad for your SnapPad jack stand pad system. Pad increases the surface area of the jack foot to help prevent sinking and provides added stability. ... Features: Replaces 1 pad for your SnapPad jack stand pad system Pad increases the surface area of the jack foot to help prevent sinking and provides added stability Made in the USA Specs: Application: 8" round jack foot Diameter: 10" Weight: 3.8 lbs 2-Year limited warranty
Replaces 1 pad for your SnapPad jack stand pad system. Pad increases the surface area of the jack foot to help prevent sinking and provides added stability. ... Features: Replaces 1 pad for your SnapPad jack stand pad system Pad increases the surface area of the jack foot to help prevent sinking and provides added stability Made in the USA Specs: Application: 8" square jack foot Diameter: 11-1/2" Weight: 5.4 lbs 2-Year limited warranty
Filters
