Clamp these sturdy steel wheels onto the square crossbar of your low-profile RV's rear hitch to help prevent tail dragging when backing up. Rotating wheels protect your undercarriage from ... Features: Unique casters clamp onto the rear trailer hitch receiver of your RV to help prevent tail dragging and digging in while backing up Mounting brackets and hardware included Wheels rotate
Attach these sturdy steel wheels to the rear of your RV to help prevent tail dragging when backing up. Protect your undercarriage from unnecessary damage.Features: Unique casters attach to the frame of your RV to help prevent tail dragging and digging in while backing up Sturdy steel construction and extra-durable roller bearings are long-lasting
5,000-lb Capacity. Designed to upgrade your rear suspension, LoadLifter 5000 air springs provide high-quality, full-time load support. They level your vehicle, improving braking and ride comfort and reducing the strain on your factory suspension.
Attach these sturdy steel wheels to the rear of your RV to help prevent tail dragging when backing up. Protect your undercarriage from unnecessary damage.Features: Unique casters attach to the frame of your RV to help prevent tail dragging and digging in while backing up Sturdy steel construction and extra-durable roller bearings are long-lasting
5,000-lb Capacity. Designed to upgrade your rear suspension, LoadLifter 5000 air springs provide high-quality, full-time load support. They level your vehicle, improving braking and ride comfort and reducing the strain on your factory suspension.
If you want to cut your current jack, you can do that and then drill a hole for the foot and or wheel. For a wheel, you can use the Pro Series 6", Detachable Caster w/ Pin for 2" Diameter Jacks - 1,200 lbs #PS1400750340 and the Pro Series…
For the LCI52-SB-86.5-68.5, the two ending measurements are: 1st - measurement from hub to hub, meaning the length of the axle in this case is 86.5 inches. 2nd - spring seat dimension where they're welded, meaning the spring seats are 68.5 inches…
If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…
I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…
The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…
For a 4-way trailer wiring harness for your 2017 Lexus RX350 that has the tow package you would want the part #56083 which is a confirmed fit. This harness does not have a converter box built into it and it just plugs right into a port you have at…
We do have the LaSalle Bristol XTRM Roof Installation Kit #3442703414KIT that is used to install the LaSalle Bristol XTRM Roof Membrane #3441700534142711440 that you referenced. I'd check with local RV dealers to you to see if any can install…
The Titan Brake Actuator #T63FR doesn't have a specific manual. There are just parts of a catalog that refer to it. I've attached those photos to assist. This product is the drum brake actuator for the Aero 7500 and has a manual lockout for…
Yes! What you're going to need for your 2022 Chevrolet 2500HD, is the 7-Way Vehicle Power Adapter w/ Power Switch for Furrion RV Observation Camera #FR87PR. This will plug directly into your vehicle's 7-way outlet and will act as a connector…
You can use the LED Light Bulb Load-Resistor Kit #DI34ZR on that camera power wire to draw the full 12V needed or you can use the Trailer Connector Adapter w/ Lamp-Out Sensor Bypass #20142 that has an integrated load-resistor for that function.
The best modern day size replacement option we have for a 6.00-16 is a 235/80-16 which measures 30-7/8" diameter x 9-3/8" wide. For this, I recommend the Kenda Karrier ST235/80R16 Radial Trailer Tire with 16" Black Mod Wheel part…
Clamp these sturdy steel wheels onto the square crossbar of your low-profile RV's rear hitch to help prevent tail dragging when backing up. Protect your undercarriage from unnecessary damage.Features: Unique casters clamp onto the rear trailer hitch receiver of your RV to help prevent tail dragging and digging in while backing up Mounting brackets and hardware included Sturdy steel
Attach these sturdy steel wheels to the rear of your RV to help prevent tail dragging when backing up. Protect your undercarriage from unnecessary damage.Features: Unique casters attach to the frame of your RV to help prevent tail dragging and digging in while backing up Sturdy steel construction and extra-durable roller bearings are long-lasting
Durable, UV-resistant cover lets you run your RV roof vent any time and in any weather. Angled louvers allow smoke, heat, and odors to escape while keeping rain and debris out. EZClip pins allow ... Features: Cover lets you open and run your RV roof vent at any time and in any weather Compatible with non-powered roof vents and low or high-powered ventilation fans Large vent area is twice
Use integrated switch or wire to a light switch to turn this single dome light on and off. Perfect for brightening up your RV kitchen when doing dishes or your enclosed trailer when loading gear ... Features: Single dome light is perfect underneath an RV kitchen cabinet or in an enclosed trailer Included energy-efficient, warm yellow LEDs last longer and burn brighter than incandescent bulbs
Help prevent damage to your motorhome's undercarriage by mounting these steel wheels to your rear trailer hitch receiver. Rollers clamp around 2-1/2" x 2-1/2" square hitch tubing.Features: Unique rollers clamp around the crossbar of your RV's rear hitch to help prevent tail dragging and digging in while backing up Mounting hardware included Heavy-duty steel construction
Ideal for multiple agricultural and commercial applications, this standard A-frame jack features an 8-5/8" retracted height and measures 13" from the mounting bracket to the top, excluding the handle. Base sold separately. Footplate or caster assembly sold separately Specs: Bracket height: 8-5/8" Retracted 21-1/2" Extended Lift: 13" Clearance: 13" from mounting bracket to top of jack Inner tubing diameter
Ratcheting jack lets you inch your trailer into tight spaces. Designed in Australia to stand up to the rigors of the Outback. Easily tracks through mud and gravel and offers great rust protection. 10" Screw travel and 8" drop leg., or neutral, or to lock wheels Push down and pull up ratcheting handle to move jack Takes you places plastic caster wheels can't More traction and agility in off-road conditions thanks to treaded tires
Wheel is an exact replacement for the ones that came with your Ultra-Fab skid wheel kit for 34' and longer Class A RVs (UF48-989013). Includes (1) 6" diameter wheel.
Stable, ratcheting jack lets you inch your trailer into tight spaces. Designed in Australia to stand up to the rigors of the Outback. Easily tracks through mud and gravel and offers great rust protection. 10" Screw travel, 5-1/2" drop leg., or neutral, or to lock wheels Push down and pull up ratcheting handle to move jack Takes you places plastic caster wheels can't More traction and agility in off-road conditions thanks to treaded tires
Roller attaches beneath your motorhome's hitch receiver opening to help prevent damage to your trailer hitch. Pin and clip sold separately.Features: Unique roller mounts under your RV's rear hitch receiver opening to help prevent damage to your hitch that can occur from tail dragging and digging in while backing up Attaches with pin
These durable, low-carbon steel twist-link chains will give your dually excellent traction in deep snow. The ladder pattern assists with effective starts and stops. Includes chains for driver's and passenger's sides.
These square-link, diamond-pattern tire chains provide excellent traction in snow and ice for vehicles with limited wheel well clearance. Made of a durable and corrosion-resistant manganese nickel alloy with built-in tensioners to ease installation.
This hitch extender converts your existing Kuat bike rack into a swing-away rack. It rotates out 90 degrees or 120 degrees on your driver's side for quick and easy access to the rear of your vehicle. Includes locking, anti-rattle hitch pin.
2-Wire pigtail has a male plug on one end that pairs with the female connection on your Optronics light. Right-angle plug allows wires to run down from light instead of straight out the back. Designed for side marker, clearance, and utility lights.
The automotive-grade pads on these brakes offer lasting effectivenes. 12" x 2" Assemblies have rust-resistant, e-coated backing plates. Fits 14-1/2" to 16-1/2" wheels.
In these days of customer "no service" I am usually disapointed when doing business with people I don't know. It was refreshing doing business with you. I'm impressed!
Filter Results
