This roof-rack system attaches directly to the OEM fixed mounting points of your Ford Transit Connect van. The rack includes a pair of Heavy-Duty 50" long, square, aluminum crossbars with built-in channels for mounting Rhino-Rack HD accessories.Features: Fixed-point crossbar system designed specifically for your vehicle 2 Heavy-Duty silver, square crossbars hold ladder racks, conduit cases and other work accessories Lightweight, structural-grade, extruded aluminum construction for strength, durability and maximum carrying capability Built-in C-channel on top of each bar is designed for mounting Rhino-Rack Heavy-Duty accessories and carriers Rubber strip in the channel helps to cushion load and provide slip resistance Can be cut to accommodate track-mounted accessories and carriers Built-in C-channel on bottom of each bar for mounting to roof-rack legs 4 Roof-rack legs attach to van's OEM fixed mounting points with pads and bolts Rounded tops on leg bases pivot to ensure that crossbars are level Custom-fit pads complement the style lines of your roof UV-resistant, glass-reinforced nylon construction Built-in security hardware deters theft - leg bolts require special tool (included) to loosen Quick installation in about 15 minutes; removal in 5 minutes Specs: Weight capacity: 220 lbs Always observe your vehicle's maximum roof load capacity Crossbar dimensions: 50" long x 1-5/8" wide x 1-7/8" tall Front leg height: 3" Rear leg height: 2" T-slot dimensions: 1-3/8" wide x 5/8" tall T-slot top opening: 13/16" Underbar slot: Full length Limited lifetime warranty
A 3-piece design makes this an all-around performer. The rubber top and base are grippy and stable, while the plastic core supports over 40,000 lbs. Supports trailer jacks and stabilizers or can be used as leveling blocks for even the largest RVs.Features: Universal jack pads use both rubber and plastic for stability and toughness Position beneath jacks, stabilizers or trailer wheels Individual layers can be separated for a variety of configurations Remove rubber pieces to allow cores to interlock with each other Stack them in a column or as a pyramid for RV leveling Grab handle built in Specs: Quantity: 1 block Individual block dimensions: 12" long x 12" wide x 2" high 1-3/4" tall without top rubber installed Extra cores add 1-1/2" height when stacked Weight: 7.6 lbs Weight capacity: 40,000 lbs 2-Year limited warranty Note: When in use, place the handle to the side, not where the tire will be driving on or off.
A 3-piece design makes this an all-around performer. The rubber top and base are grippy and stable, while the plastic core supports over 40,000 lbs. Supports trailer jacks and stabilizers or can be used as leveling blocks for even the largest RVs.Features: Universal jack pads use both rubber and plastic for stability and toughness Position beneath jacks, stabilizers or trailer wheels Individual layers can be separated for a variety of configurations Remove rubber pieces to allow cores to interlock with each other Stack them in a column or as a pyramid for RV leveling Grab handle built in Specs: Quantity: 1 block Individual block dimensions: 12" long x 12" wide x 2" high 1-3/4" tall without top rubber installed Extra cores add 1-1/2" height when stacked Weight: 7.6 lbs Weight capacity: 40,000 lbs 2-Year limited warranty Note: When in use, place the handle to the side, not where the tire will be driving on or off.
A 3-piece design makes this an all-around performer. The rubber top and base are grippy and stable, while the plastic core supports over 40,000 lbs. Supports trailer jacks and stabilizers or can be used as leveling blocks for even the largest RVs.Features: Universal jack pads use both rubber and plastic for stability and toughness Position beneath jacks, stabilizers or trailer wheels Individual layers can be separated for a variety of configurations Remove rubber pieces to allow cores to interlock with each other Stack them in a column or as a pyramid for RV leveling Grab handle built in Specs: Quantity: 1 block Individual block dimensions: 12" long x 12" wide x 2" high 1-3/4" tall without top rubber installed Extra cores add 1-1/2" height when stacked Weight: 7.6 lbs Weight capacity: 40,000 lbs 2-Year limited warranty Note: When in use, place the handle to the side, not where the tire will be driving on or off.
A 3-piece design makes this an all-around performer. The rubber top and base are grippy and stable, while the plastic core supports over 40,000 lbs. Supports trailer jacks and stabilizers or can be used as leveling blocks for even the largest RVs.Features: Universal jack pads use both rubber and plastic for stability and toughness Position beneath jacks, stabilizers or trailer wheels Individual layers can be separated for a variety of configurations Remove rubber pieces to allow cores to interlock with each other Stack them in a column or as a pyramid for RV leveling Grab handle built in Specs: Quantity: 1 block Individual block dimensions: 12" long x 12" wide x 2" high 1-3/4" tall without top rubber installed Extra cores add 1-1/2" height when stacked Weight: 7.6 lbs Weight capacity: 40,000 lbs 2-Year limited warranty Note: When in use, place the handle to the side, not where the tire will be driving on or off.
Upgrade the strength and durability of your stabilizer jack feet by adding these permanent SnapJack feet to the bottom. Increased surface area creates a more robust footprint compared to a standard foot. Ideal for sloped or uneven surfaces.Features: SnapJack foot improves the stability of your stabilizer jack (sold separately) Thicker and stronger than standard feet Improved stability and grip on uneven terrain Anti-slip base pads are made from a durable recycled rubber Withstands heavy-duty use for years to come Prevents slippage when stabilizing your camper Provides significantly more grip compared to using wooden blocks Added height on the SnapJack feet prevents the stabilizers from being over-extended Includes all hardware to install SnapJack feet to stabilizers Made in the USA Specs: Applications: Lippert PSX1 Lippert PSX2 Lippert Quick Drop Stabilizer Rock Solid Stabilizer Systems Quantity: 4 feet Overall dimensions: 8" wide x 8" long x 2-3/4" tall Foot dimensions: 5-1/2" diameter x 1/4" tall Weight: 5.4 lbs each 2-Year limited warranty
Hey Ryan! As long as you clean the mounting points on your car before installation the #IN34XR won't scratch the paint. The coating and padding on the feet and clamps, along with the custom fit design, will prevent any scratches. The square bars…
Apart from how the rooftop bags mount there is little difference between the cargo bags that go on the naked roof of your 2013 Kia Soul or one that attaches to a roof rack. To avoid having to put a pricey roof rack on your Soul, I strongly recommend…
The waterproof Rightline Sport Jr. Rooftop Cargo Bag #RL100S50 offers 9-cubic-feet of internal storage space and the convenience of being able to mount to a wide range of vehicles, with or without roof rack hardware. The included mounting straps…
The main difference between the Rightline Rooftop Cargo Bags - 10 Cu. Ft.; Ace Jr part #RL100A50, Range Jr part #RL100R50, and Gear Sport Jr part #RL100S50 is their ability to keep out water with the Ace Jr being the worst and the Gear Sport being…
The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…
Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…
Hey Kelvin, welcome back. To flat tow a 2026 Ford Maverick with your Demco Commander II Tow Bar item #DM9511012, I recommend the following parts: Baseplate Kit - Demco Tabless Base Plate Kit item #DM38CV Wiring Harness - Roadmaster Diode 7-Wire to…
The Dometic RV Water Heater - Gas - Automatic Pilot - 12 Volt - 8,800 Btu - 6 Gal Tank Item AT96121 is the direct replacement for the GC6AA-10E. Unfortunately it is out of stock with no expected restock date. Instead I recommend the Furrion RV…
To install a Redarc Tow Pro Liberty in your 2023 Toyota Tacoma Sport you will need the following parts: Redarc Tow-Pro Liberty Brake Controller item #RED24FR Plug-and-Play Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers item #RED99FR…
The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…
Hi Daniel, The short answer is yes! You can use the Yakima HD Bar Adapters for Yakima Streamline Towers part #Y03541 to use your Yakima crossbars in a RetraxPRO XR tonneau cover! You will need a few parts to accomplish this though: HD Bar SL Adapter…
Landing Pads allow you to attach SkyLine and Control Towers to any vehicle with a metal roof when underside access is unavailable. Permanently to metal roofs and combine with removable Towers to form a base for an aftermarket roof-rack system.Features: Provide mounting point for Yakima SkyLine and Control Towers Fit vehicles with metal roofs where underside access is unavailable Work on vehicles with headliners Attach to roofs with bolts and anchors Include snap-on covers for protection when Towers are not in place Specs: Quantity: 2 pads Lifetime warranty
Replaces foot and #5 pad for your Yakima BaseLine roof rack tower manufactured after 2015. The foot easily clips onto the bottom of the tower and the pad is specifically designed to fit the shape and contour of your roof.Features: Replaces Yakima roof rack foot and #5 foot pad Works with BaseLine roof rack tower manufactured after 2015 Foot easily clips onto the bottom of the roof rack tower Rubber pad is custom designed to fit the shape and contour of your vehicle's roof
Replace the pads on your Yakima RailGrab roof-rack towers with this equivalent part. Pads fit between the rails and towers. Set of 4.Features: Set replaces pads on your Yakima RailGrab roof-rack towers (Y00138 and Y00138-Y8880201) Cushions the connection between the tower and your rail Quantity: 4 pads
Replaces foot and #1 pad for your Yakima BaseLine roof rack tower manufactured after 2015. The foot easily clips onto the bottom of the tower and the pad is specifically designed to fit the shape and contour of your roof.Features: Replaces Yakima roof rack foot and #1 foot pad Works with BaseLine roof rack tower manufactured after 2015 Foot easily clips onto the bottom of the roof rack tower Rubber pad is custom designed to fit the shape and contour of your vehicle's roof
Replaces foot and pad for your Yakima RidgeLine roof rack tower manufactured after 2015. The pad easily clips onto the bottom of the tower and is specifically designed to fit the shape and contour of your roof.Features: Replaces Yakima roof rack foot and foot pad Works with RidgeLine roof rack tower manufactured after 2015 (Y00145) Foot easily clips onto the bottom of the roof rack tower Custom designed to fit the shape and contour of the vehicle's roof
Replaces foot and #4 pad for your Yakima BaseLine roof rack tower manufactured after 2015. The foot easily clips onto the bottom of the tower and the pad is specifically designed to fit the shape and contour of your roof.Features: Replaces Yakima roof rack foot and #4 foot pad Works with BaseLine roof rack tower manufactured after 2015 Foot easily clips onto the bottom of the roof rack tower Rubber pad is custom designed to fit the shape and contour of your vehicle's roof
Replaces foot and #2 pad for your Yakima BaseLine roof rack tower manufactured after 2015. The foot easily clips onto the bottom of the tower and the pad is specifically designed to fit the shape and contour of your roof.Features: Replaces Yakima roof rack foot and #2 foot pad Works with BaseLine roof rack tower manufactured after 2015 Foot easily clips onto the bottom of the roof rack tower Rubber pad is custom designed to fit the shape and contour of your vehicle's roof
Landing Pads allow you to attach SkyLine and Control Towers to any vehicle with underside access, like truck or camper shells. Permanently mount to fiberglass roofs, combining with removable Towers to form a base for an aftermarket roof-rack system.Features: Provide mounting point for Yakima SkyLine and Control Towers Fit vehicles with fiberglass roofs, like truck or camper shells Attach to roofs with bolts Include snap-on covers for protection when Towers are not in place Specs: Quantity: 2 pads Lifetime warranty
Replaces foot and #3 pad for your Yakima BaseLine roof rack tower manufactured after 2015. The foot easily clips onto the bottom of the tower and the pad is specifically designed to fit the shape and contour of your roof.Features: Replaces Yakima roof rack foot and #3 foot pad Works with BaseLine roof rack tower manufactured after 2015 Foot easily clips onto the bottom of the roof rack tower Rubber pad is custom designed to fit the shape and contour of your vehicle's roof
Replaces foot and #6 pad for your Yakima BaseLine roof rack tower manufactured after 2015. The foot easily clips onto the bottom of the tower and the pad is specifically designed to fit the shape and contour of your roof.Features: Replaces Yakima roof rack foot and #6 foot pad Works with BaseLine roof rack tower manufactured after 2015 Foot easily clips onto the bottom of the roof rack tower Rubber pad is custom designed to fit the shape and contour of your vehicle's roof
Replaces an outer foot pad for your Malone AirFlow 2 roof rack (MPG215, MPG216, MPG217, MPG226, MPG227, or MPG228). Inner foot pad is sold separately.Features: Replaces an outer foot pad for your Malone AirFlow 2 roof rack (MPG215, MPG216, MPG217, MPG226, MPG227, or MPG228) Inner foot pad is sold separately Includes 1 outer foot pad Fits: Malone AirFlow 2 roof racks: MPG215, MPG216, MPG217, MPG226, MPG227, and MPG228
Replaces the rubber foot pad for your SportRack semi-custom roof rack (SR1002, SR1003, SR1005, SR1006, SR1007, SR1008, and SR1010).Features: Replaces 1 rubber foot pad for your SportRack semi-custom roof rack (SR1002, SR1003, SR1005, SR1008, and SR1010) Mounts to the bottom of the roof rack's foot Protects your vehicle's paint finish from scratches and abrasions
Custom-fit landing pads permanently install to roof ditch on your vehicle's naked roof. The pads creates heavy-duty mounting points for Yakima SkyLine towers. ... Features: Landing pads provide heavy-duty mounting points for Yakima SkyLine towers (sold separately) Pads install in roof ditch on your vehicle's naked roof Ideal for naked-roof vehicles and truck cabs Heavy-duty design handles heavy loads like a platform rack or rooftop tent Protect your vehicle from scratches with UV-resistant, rubber base pads Mounts permanently to your roof with rivets - drilling required Includes brackets, stainless steel rivets, and mounting hardware Specs: Quantity: 4 pads Limited lifetime warranty
Replace your vehicle's factory crossbars with these Landing Pads so you can install a stronger, more versatile roof rack in its place. The pads create mounting points for Yakima SkyLine and Control Towers and crossbars (sold separately).Features: Mounts in place of your vehicle's factory crossbars to create attachment points for a Yakima roof rack Expands crossbar spread to 30" for easier cargo box and kayak mounting Increases roof rack weight capacity to 165 lbs so you can carry more gear Protects your vehicle's paint with UV-resistant, rubber base strips Bolts onto the mounting points for your factory crossbars with included hardware Includes snap-on covers to protect the pads when towers are not in place Specs: Quantity: 4 pads Limited lifetime warranty These pads let you replace your vehicle's factory roof rack with one that is stronger and has a wider crossbar spread.
Replace your vehicle's factory crossbars with these Landing Pads that are designed to install directly to the crossbar mounting points on your side rails. The pads create mounting points for Yakima SkyLine and Control Towers.Features: Mounts in place of your vehicle's factory crossbars to provide attachment points for a Yakima roof rack Pair with Yakima SkyLine and Control Towers and crossbars (sold separately) to create a complete roof rack Bolts to the factory crossbar mounting points on your side rails with included hardware Corner-specific pads are labeled for easy installation Includes snap-on covers to protect the pads when towers are not in place Specs: Quantity: 4 pads Dimensions (each): 6-3/4" long x 2" wide x 2" tall Limited lifetime warranty These pads let you replace your vehicle's factory roof rack.
Replaces 1 SmartFoot pad for Whispbar custom fit kit for flush, through, and HD roof racks (WB-K649).Features: Replaces SmartFoot pad for Whispbar custom fit kit for flush, through, and HD roof racks (WB-K649) Protective pad wraps around clips to prevent scratches and abrasions on your roof Quantity: 1 replacement pad
These firm foam pads make it easy to transport 1 large surfboard, SUP, or sailboard on your platform rack or roof rack crossbars. Pads wrap firmly around slats or crossbars and secure with hook and loop fasteners. ... Features: Foam pads make it easy to transport 1 SUP on your platform rack or roof rack crossbars Also great for surfboards, ladders, lumber, and other similarly sized gear 2 Pads wrap around platform rack slats or roof rack crossbars and secure with heavy-duty hook and loop fasteners Use on Front Runner combined slats by attaching with Eye Nuts/Tie-Down rings (sold separately) Polyester covers are UV-resistant to prevent fading Includes mesh storage bag Specs: Application: Slimline II platform racks, Front Runner crossbars, most aero bars Single pad dimensions: 24" long x 3-1/2" wide x 3" tall Weight: 14.1 oz 1-Year warranty Note: Not compatible with Slimsport platform racks or Slimpro van racks.
Manual jacks get old fast when you're trying to hitch up or level. This 5,000 lb electric A-frame jack plugs into your 7-way for push-button lifting and includes an integrated SnapPad for a wider, more stable base on soft or uneven ground.Easy Drop Leg Adjustment: Extends up to 9-3/4" for extra lift with pull-pin operation. SnapPad Stability Upgrade: Rubber pad increases footing and helps prevent sinking. Corrosion-Resistant Finish: E-coat and matte black powder coat help prevent rust and corrosion.
Filters
