To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
These Heavy-Duty 50" long, square crossbars are built from structural-grade, extruded aluminum that gives you serious strength without weighing you down. With a 220-lb weight capacity, they’re ready for ladders, conduit cases, or work gear that needs a solid base. The aluminum construction resists corrosion and holds up to long-term use, whether you’re hauling tools to the jobsite or heading out with camping gear.
Each crossbar has a built-in C-channel on top that’s designed for mounting Rhino-Rack Heavy-Duty accessories. The rubber strip inside cushions your load and adds slip resistance, so what you strap down stays put. You can also use the full-length under-bar slot for easy attachment to the legs, keeping your setup strong and balanced across the vehicle’s roof.
The front and rear leg sets are designed with different heights—3" in front and 2" in back—to match the roof curve so the bars stay level once installed. The rounded tops of each leg pivot to fine-tune alignment, keeping cargo boxes and rooftop trays sitting flat. The UV-resistant, glass-reinforced nylon bases use custom-fit pads that protect the roof finish while maintaining a tight grip at every mounting point.
Built-in security bolts deter theft and can only be loosened with the special tool that comes in the kit. Once installed, you’ll have peace of mind knowing your rack and gear aren’t easily removed when parked overnight or at trailheads. It’s a simple layer of protection that makes a big difference when you travel with valuable equipment.
The system installs directly to OEM fixed mounting points using pads and bolts—no drilling or guesswork needed. Expect about 15 minutes for installation and 5 minutes for removal when it’s time to switch setups. That means more time hauling gear instead of fighting complicated hardware or tools.
Customer Satisfaction Score:
86% were satisfied with this product
14% of customers were not satisfied
Ratings & Reviews
Installed easily and fit to spec as it said it would. Haven't strapped anything to them yet but look solid and they should do the job.
Love it when a product preforms as advertised. This installed in 15 minutes all parts were complete and I would recommend this to anyone.
Just what I ordered! Fits perfectly easy to install. Thank you!
Awesome product. Solid. Looks great on my vehicle.
The rack was very easy to install works very well but there's only so much you can do with the size of the vehicle. But it was a good investment for the driver.
Thank you!
The M8 bolts and spring washer were missing from the packaging. A 30min job turned into 3 hours. At this price that is very disappointing. The racks are solid but installation is a bit weird. I wish the M10 channel nut was in a fixed position. It was a pain getting it to stay in the proper orientation while tightening. Also the end caps don't snap in and are easily pulled off. Overall the racks will do good but for the price I was expecting better.
Fit perfect,Low profile,Good Quality
Super fast shipping. Very pleased with company
Quick and easy to install with the instructions provided for my vehicle. Came with all the parts and tools we needed.
Love it! It installed super easy, looks great, I couldn't be more pleased with whole experience from ordering to installation. Thank you for delivering what you promised.
My order came quickly and just as shown in the installation video was easy to install. I would recommend both this product and the company.
Product was as advertised. We had a problem with a missing part and etrailer addressed it right away. Outstanding Customer Service. I would definitely order from them again.
The rack was very quick and easy to install. It fits well and is very solidly attached to our Transit van. The materials it is made from appear to be of high quality. We chose this rack over the one offered by Ford Motor Company because of it's aluminum crossbar as opposed to Fords rubber coated steel crossbars which could rust if the coating was scratched through.
This is exactly what I needed and specific to my vehicle. The installation video was very precise and will give anyone the confidence to install the roof rack with ease. The shipping was also very fast. I am very happy to have found this company and site.
Product arrived quickly, etrailer is awesome, however Rhino Rack missed a couple small parts. I am waiting on replacement parts from the factory itself, no telling the wait. The bars are good quality, instructions minimal. I would suggest a plastic bicycle tire lever to help install the rubber channel. Otherwise, I am waiting on the missing pieces to complete the install and report on performance.
This was a perfect fit for my 2010 Transit Connect. etrailer sent out the package the day after my order and I received it in Hawaii the next day after being shipped out. The Rhino Rack is great since it's a factory application using the roof bolts. Also, the bars already have a rubber lining for surf boards.
The roof racks have proven to be very strong. They have held up well with heavy loads from Missouri and throughout the west coast. I'm glad they were available.

Salvatore
4/14/2019
Its been across the U.S. three times now without a problem. This rack is strong and will carry camping gear, festival gear, and a load of product. I did replace the original product nuts with stainless steel nuts. The original worked fine but I preferred the stainless.
I have a 2012 Ford transit connect and the install was very smooth and easy. Uses the factory mounting points and is a breeze. Took me less than 30 minutes

Ian F.
11/20/2021
After a year of ownership I still like the rack a lot. The rubber strip is holding up great. The only thing I would improve is to make the rack slightly longer by like 2 inches or so on each side so the if I put a sheet of plywood up there its easier to hook a strap underneath. its 48 wide, and plywood is 48 wide.
I mounted these racks on my Transit Connect about a year ago and have to say that I’m quite happy with them. Easy to mount and they are weathering well.
I tie down all sorts of things to these racks that won’t fit in the van. I would have given them a higher rating if they had come with a better way to attach straps or bungee’s. I’ve “McGivered” my own ways to make that work.
Im now looking at an awning to go with these. I’ll probably get another Rhino-Rack product, they seem to be pretty well made.
Thanks
The RLZ01-DC I s a good solid product. In fact it is stronger than any of the competing products I looked at. etrailer's video made it a snap to install. My only complaint it that it was shipped with many of the fasteners missing. A quick call to etrailer remedied the situation, and a new parts kit was sent.
I was concerned that the height of the rack was so high that I would not be able to get my 2012 Transit Connect into my very low carport. etrailer responded to my question about this with a very good photo showing the exactly the dimensions I needed. In fact it IS too high to fit, but I have decided to keep the rack anyway and only install it when I need to haul something.
I am particularly pleased with the ability to quickly remove and reinstall (8 easily accessed screws).
Great! Easy to install. Carried a canoe driving 70-80 miles an hour on the highway and no problems.
I just received my Rhino roof rack and am very pleased with the super fast shipping. The rack seems very strong and it’s very easy to install. I will have to order the 3rd rail also as I had planned on adding a rooftop tent and the tent wouldn’t have enough support on the back. ETrailer is a great place to purchase from since they have everything to fit your needs and service has been great so far. Will be ordering the 3rd rail now. Thank you!

Casey
9/22/2019
Rhino rack is holding up great! I discovered that the leaking onto the seatbelt after installing the rack was due to not using the rubber washer that was attached to the old roof plugs. I reinstalled the racks using those washers and no more leak. If anyone is having a leaking problem, that’s how to fix it.
For the most part easy install, very straightforward, inserting the rubber into the rails needed some effort. The video on your website of the install has the rubber already inserted.
Easy to install good quality,Fast delivery!!!! A-1 customer service!

Victor R.
7/7/2017
Am always using it!
Do you have a question about this Roof Rack?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.













Jenny N.
8/16/2023
I hate to hear that the rack is missing hardware. I will have our Customer Service team reach out to you.