This magnetic hitch reducer adapts your 2-1/2" receiver for use with 2" hitch accessories. Slides into your reciver and is held in place by 2 strong magnets. ... Features: Reduces your 2-1/2" hitch receiver for use with 2" hitch accessories Slides into your receiver and is held in place by 2 strong magnets Magnets also keep the reducer from coming forward when removing your hitch accessory Lets you use your 2" hitch accessories with your 2-1/2" hitch Durable steel construction with matte black powder finish and e-coat is corrosion resistant Hitch pin and clip or hitch lock are sold separately A pin and clip or lock must be used at all times when this adapter is installed in the hitch receiver - with or without accessories installed as well Specs: Application: 2-1/2" x 2-1/2" hitch receivers Hitch reducer size: 2" x 2" Overall length: 5" Limited lifetime warranty
Adapter lets you use your 2" hitch-mounted accessories with your 2-1/2" x 2-1/2" trailer hitch and extend your trailer hitch receiver opening with the same piece. Hitch pin and clip or hitch lock are sold separately.Features: Lets you use 2" hitch-mounted accessories in your 2-1/2" trailer hitch Slides into trailer hitch receiver to reduce size from 2-1/2" x 2-1/2" to 2" x 2" Extends trailer hitch receiver opening 7" out from the rear of your vehicle to avoid obstacles Get extra clearance for your hitch-mounted accessories, such as bike racks or cargo carriers Durable steel with matte black powder finish and e-coat that resists corrosion Requires hitch pin and clip or hitch lock (sold separately) Specs: Application: 2-1/2" x 2-1/2" trailer hitch receivers Hitch receiver size: 2" x 2" Maximum tongue weight: 350 lbs Overall length: 12" Distance between hitch pin holes (center to center): 7" Distance from receiver end to center of nearest pin hole: 2-1/2" Distance from accessory end to center of nearest pin hole: 2-1/2" Limited lifetime warranty Notes: Using this adapter will reduce your hitch's weight capacity by 50 percent.
Adapts your 2" receiver for use with 1-1/4" hitch accessories. Hitch pin and clip included. Hitch lock sold separately.Features: Reduces your 2" receiver for use with 1-1/4" hitch accessories Lets you use your 1-1/4" hitch accessories with your 2" hitch Durable steel with matte black powder finish and e-coat that resists corrosion Hitch pin and clip is included Hitch lock is sold separately Specs: Application: 2" x 2" hitch receivers Hitch receiver size: 1-1/4" x 1-1/4" Overall length: 7-1/16" Distance from receiver end to center of nearest pin hole: 2-1/2" Distance between accessory end to nearest pin hole: 1-5/8" Limited lifetime warranty Notes: Weight capacity is limited to the capacity of your hitch.
Adapter sleeve lets you use 2" towing and hitch-mounted accessories with your 2-1/2" hitch receiver. Hitch pin and clip or hitch lock are sold separately.Features: Reduces a 2-1/2" x 2-1/2" hitch receiver opening to 2" x 2" Lets you use 2" towing and hitch-mounted accessories Installs easily - slides directly into your hitch or onto the shank of your accessory Durable steel with matte black powder finish and e-coat that resists corrosion Hitch pin and clip or hitch lock sold separately Specs: Application: 2-1/2" x 2-1/2" trailer hitch receivers Receiver size: 2" x 2" Overall length: 5-1/2" Distance from accessory end to nearest pin hole: 3" Distance from receiver end to nearest pin hole: 2-1/2" Limited lifetime warranty Note: Weight capacity is limited to the rated capacity of your hitch receiver.
Having a big receiver with smaller gear can be a pain. Big Truck Big RV magnetic reducers make it easy to step a 3" receiver down to 2". Magnets hold both sleeves in place while you add your gear and secure it with a hitch pin.The offset lip fixes that by giving you a solid grip point, making it easy to separate the reducers without prying or forcing them. Tested, Trusted, and JD Approved JD's the guy behind Big Truck Big RV and he doesn't just slap his name on gear he doesn't use.
Adapter sleeves let you use 2" and 2-1/2" hitch-mounted accessories with your 3" hitch receiver. Add the small sleeve to use 2" accessories with a 2-1/2" receiver. Hitch pin and clip or hitch lock are sold separately.Features: Reduces your 3" x 3" hitch receiver opening to 2-1/2" x 2-1/2" or 2" x 2" Small sleeve can be used separately to reduce a 2-1/2" x 2-1/2" hitch receiver opening to 2" x 2" Lets you use 2-1/2" and 2" towing and hitch-mounted accessories Installs easily - slides directly into your hitch or onto the shank of your accessory Durable steel with matte black powder finish and e-coat that resists corrosion Hitch pin and clip or hitch lock sold separately Specs: Application: 3" x 3" hitch receivers Overall length: 6-3/8" Distance from receiver end to center of nearest pin hole: 2-1/2" Distance from accessory end to center of nearest pin hole: 3-7/8" Limited lifetime warranty Note: Weight capacity is limited to the rated capacity of your hitch receiver.
Don't replace your rack just because your hitch is bigger. This adapter lets your 2" Yakima rack fit a 2-1/2" hitch, so you don't have to buy new gear just to make your setup work.Extended 10" Sleeve for Added Support: Longer design adds more contact inside the hitch for better support than shorter reducers. Features to know about Make Your Rack Fit Your Larger Hitch If you've upgraded to a 3/4-ton or 1-ton truck, your 2" rack won't fit a 2.5" hitch.
Got a 2-1/2" hitch but need to run 2" accessories? This Big Truck Big RV magnetic reducer sleeve bridges the gap. Slide it into place and feel the magnets grab. Add a ball mount or carrier, slide in your hitch pin, and go.Expandable System: Works with the black BTBRV 3" to 2-1/2" reducer (BTBRV74FR - sold separately). Features to know about Magnets Make Setup Simple Reducers without magnets can slide around or fall out while you're trying to line up the pin, and that gets frustrating fast.
Use your 2" hitch-mounted accessories with your 2-1/2" x 2-1/2" trailer hitch and extend your trailer hitch receiver opening with the same piece. Sturdy, black powder coated steel construction.Features: Lets you use 2" hitch-mounted accessories in your 2-1/2" trailer hitch Slides into trailer hitch receiver to reduce size from 2-1/2" x 2-1/2" to 2" x 2" Extends trailer hitch receiver opening 6" out from the rear of your vehicle to avoid obstacles Get extra clearance for your hitch-mounted accessories, such as bike racks or cargo carriers Constructed of sturdy steel Resists corrosion with black powder coat finish Requires hitch pin and clip or hitch lock (sold separately) Made in the USA Specs: Application: 2-1/2" x 2-1/2" trailer hitch receivers Maximum gross trailer weight: 5,000 lbs Maximum GTW when used with weight distribution: 10,000 lbs Maximum tongue weight: 500 lbs Maximum TW when used with weight distribution: 1,000 lbs Pin hole diameter: 5/8" Distance between hitch pin holes (center to center): 7" Extends receiver an additional 7" from hitch Overall length: 12" Notes: Using this extension will reduce your hitch's weight capacity by one third.
If your hitch accessories have a 1-1/4" shank and your hitch is 2", this sleeve fixes that problem and lets them work together. It holds on to your stuff tight and keeps you from buying new gear just to make your setup work.Highlights Use Your Existing Gear: Lets you use 1-1/4" racks or accessories with your 2" hitch. Keep Your Setup Stable: One-piece reducer sleeve holds tight and keeps your gear from wobbling. Resist Rust and Wear: Carbon steel coating protects against corrosion and daily use.
Carry your 2" hitch bike rack in your vehicle's 2-1/2" x 2-1/2" trailer hitch receiver. Raised tab prevents the adapter from sliding in too far. Compatible with Kuat flatlock hitch cam systems and standard hitch pin holes.Features: Reducer lets you carry your 2" hitch bike rack in your vehicle's 2-1/2" x 2-1/2" trailer hitch receiver Elongated hitch pin hole works with Kuat flatlock hitch cam systems Also works on racks with standard hitch pin hole Easy to use - slide directly into your hitch, then slide bike rack into adapter hitch port Raised tab prevents adapter from sliding too far into your hitch receiver Magnets on reducer help prevent it from sliding out of hitch when removing accessory Steel construction with black powder coat is rust resistant Specs: Application: 2-1/2" x 2-1/2" hitch receivers Length: 6-1/4" Limited lifetime warranty
This adapter sleeve with pinched ends lets you use 2" towing and hitch-mounted accessories with your 2-1/2" hitch receiver and stops when flush and holes are aligned. E-coat and black powder coat finishes resist corrosion.The pinched ends on this reducer sleeve keep the adapter in place while you insert your bike rack or other accessory into your hitch. This ensures that the pin holes on the adapter line up with those on your hitch receiver and on your accessory.
Got a 3" hitch but need to run 2-1/2" accessories? This Big Truck Big RV magnetic reducer sleeve bridges the gap. Slide it into place and feel the magnets grab. Add a ball mount or carrier, slide in your hitch pin, and go.Expandable System: Works with the red BTBRV 2-1/2" to 2" reducer (sold separately). Features to know about Magnets Make Setup Simple Reducers without magnets can slide around or fall out while you're trying to line up the pin, and that gets frustrating fast.
This reducer sleeve lets you use 2" towing and hitch-mounted accessories with your 2-1/2" receiver. Adapter easily slides into your hitch receiver or onto the shank of your accessory. ... Features: Adapter reduces a 2-1/2" x 2-1/2" hitch receiver to 2" x 2" Lets you use a 2" ball mount or hitch-mounted accessory Easy to use - slides directly into your hitch or onto the shank of your accessory Durable steel construction Zinc primer and epoxy powder coat resist corrosion Hitch pin and clip or hitch lock sold separately Made in the USA Specs: Dimensions: 5-1/2" long x 2-1/2" wide Pin hole diameter: 5/8"
Simple design transforms your 2" receiver into a 1-1/4". This lets you use all your 1-1/4" hitch accessories, such as bike racks, cargo carriers, or ballmounts with a 2" hitch. Just pin it, clip it, and go!!!Features: Easily convert a 2" receiver to 1-1/4" Sleeve design does not reduce tongue weight capacity Powder coated black finish Conveniently includes 1/2" pin and clip to hold 1-1/4" accessories in place 5/8" Hitch pin and clip for 2" receiver is sold separately Specs: Maximum towing capacity: 3,000 lbs Maximum tongue weight: 300 lbs Length: Center of hitch pin hole to center of hitch pin hole: 3" Overall: 7"
Use your 2" hitch-mounted accessories with your 2-1/2" x 2-1/2" trailer hitch by slipping this bushing into your receiver. Sturdy, black powder coated steel construction.Features: Lets you use 2" hitch-mounted accessories in your 2-1/2" trailer hitch Slides into trailer hitch receiver to reduce size from 2-1/2" x 2-1/2" to 2" x 2" Constructed of sturdy steel Resists corrosion with black powder coat finish Pin and clip sold separately Specs: Application: 2-1/2" x 2-1/2" trailer hitch receivers Overall length of bar: 5-3/4" Pin hole diameter: 5/8" 1-Year warranty
This adapter sleeve lets you use 2-1/2" towing and hitch-mounted accessories with your 3" hitch receiver. Durable, carbide black powder coat finish.Features: Adapter reduces a 3" x 3" hitch receiver opening to 2-1/2" x 2-1/2" Lets you use 2-1/2" towing and hitch-mounted accessories Easy to use - slides directly into your hitch or onto the shank of your accessory Durable, carbide black powder coat finish Specs: Pin hole diameter: 3/4" Limited lifetime warranty Note: Weight capacity is limited to the rated capacity of your hitch receiver.
Use your 2-1/2" hitch accessories in your 3" receiver with this hitch reducer. Install the reducer on your accessory, then slide into your hitch receiver. Bolt-on design provides a quieter ride by preventing rattle.Features: Use your 2-1/2" hitch accessories in your 3" hitch receiver Install easily with a 3/16" Allen wrench (not included) Bolt reducer onto your hitch accessory, then slide into your hitch receiver Set screws must be on top when installing Provides a quieter ride by preventing the rattle you get with slide-on reducers Secures with pin and clip or hitch lock (sold separately) Made in the USA
If the hitch receiver on your new Ford F250 or F350 and your towing equipment no longer match, this hitch adapter is a quick fix. Slide the reducer sleeve into your 3" hitch to instantly convert it to a 2-1/2" hitch receiver.
This adapter sleeve with pinched ends lets you use 2-1/2" towing and hitch-mounted accessories with your 3" hitch receiver and stops when flush and holes are aligned. E-coat and black powder coat finishes resist corrosion.The pinched ends on this reducer sleeve keep the adapter in place while you insert your bike rack or other accessory into your hitch. This ensures that the pin holes on the adapter line up with those on your hitch receiver and on your accessory.
If your hitch receiver and your towing equipment no longer match, this hitch adapter is a quick fix. Slide the reducer sleeve into your 2-1/2" hitch to instantly convert it to a 2" hitch receiver.
This adapter sleeve lets you use 2" with your 2-1/2" hitch receiver, inlcluding Hollywood racks with no wobble system. Black powder coat finish resists corrosion. Secured to receiver with 2 set screws.The raised tab on this reducer sleeve keeps the adapter in place while you insert your bike into your hitch. Because of the elongated hitch pin hole, the adapter can be used with Hollywood Racks' anti-wobble system found on the HR1400 and HR1450 series of racks.
This adapter sleeve lets you use 2" towing and hitch-mounted accessories with your 2-1/2" hitch receiver. Durable, carbide black powder coat finish.Features: Adapter reduces a 2-1/2" x 2-1/2" hitch receiver opening to 2" x 2" Lets you use 2" towing and hitch-mounted accessories Easy to use - slides directly into your hitch or onto the shank of your accessory Durable, carbide black powder coat finish Specs: Dimensions: 5-1/2" long x 2-1/2" wide Pin hole diameter: 5/8" Limited lifetime warranty Note: Weight capacity is limited to the rated capacity of your hitch receiver.
Adapter sleeves let you use 2" and 2-1/2" towing and hitch-mounted accessories with your 3" hitch receiver. Use the small sleeve separately to use 2" accessories with a 2-1/2" receiver. Carbide black powder coat finish.Features: Adapters reduce a 3" x 3" hitch receiver opening to 2-1/2" x 2-1/2" or 2" x 2" Small sleeve can be used separately to reduce a 2-1/2" x 2-1/2" hitch receiver opening to 2" x 2" Lets you use 2-1/2" and 2" towing and hitch-mounted accessories Easy to use - slides directly into your hitch or onto the shank of your accessory Durable, carbide black powder coat finish Specs: Pin hole diameter: 3/4" Limited lifetime warranty
Filters
