These leveling scissor jacks with a 5,000-lb combined capacity will keep your RV level and stable. They adjust from 5" to 23-3/4" as your application requires. ... Do not use these jacks to lift your trailer or RV. Doing so will exceed the capacity of the jacks.
... The bow-tie bases steady the jacks on soft surfaces. Handle included.Do not use these jacks to lift your trailer or RV. Doing so will exceed the capacity of the jacks.
These leveling scissor jacks with a 5,000-lb combined capacity will keep your RV level and stable. They adjust from 5" to 23-3/4" as your application requires. ... Do not use these jacks to lift your trailer or RV. Doing so will exceed the capacity of the jacks.
Heavy-duty jacks stabilize your lightweight cargo or camper trailer. Legs telescope to the ground when you release the lever. Jacks swing up for storage. ... Do not use these jacks to lift your trailer or RV. Doing so will exceed the capacity of the jacks.
If the 25K lift capacity of the TJD-25100 isn't enough, adding this follow leg will double it! Best for severe-duty tractor trailers, agricultural, and construction uses. Measures 13" when retracted. Drop leg adds an extra 11-1/2".Features: Companion jack works with your etrailer or Ram 2-speed jack (TJD2SP-25100 - sold separately) to raise and lower your gooseneck trailer Ideal for heavy-duty agricultural, construction and industrial trailer uses Hands-free spring return lets you retract the leg using your foot Drop leg with spring-loaded plunger pin increases overall extension for maximum adjustability Faster and easier to align than a pin and clip Round footplate minimizes sinking in soft ground Strong, stable, and durable industrial-sized steel frame Black painted inner and outer tubes Easy maintenance Built-in grease zerks make routine maintenance easy Weld on installation Sidewind handle, cross shaft, and gearbox are sold separately Specs: Lift capacity: 25,000 lbs Total travel: 24-1/2" Screw travel : 13" Drop leg travel : 11-1/2" Overall height (from bottom of foot to top of jack): Retracted: 30" Extended: 43" Height (from bottom of footplate to bottom of outer tube): Retracted: 5" Extended: 18" Outer tube length: 25" Outer tube width: 4-3/8" Inner tube width: 4" 1-1/2" Plunger pin hole diameter Adjustment hole spacing: 4" on center Rod shaft diameter: 1" Footplate diameter: 9-7/8" 1-Year warranty
This dual-pin, two-speed jack from RAM delivers 20,000 lb of static support and 12,000 lb of lift. Its spring-return drop leg, 4-3/8" tubing, and 9" x 9" footplate provide stable, heavy-duty performance.Features: Two-speed gearbox makes raising or lowering heavy loads faster and easier Dual-pin, spring-return drop leg lets you quickly set height without cranking Heavy-duty square tubing provides stability under maximum load Large footplate keeps the jack steady and drains water away Grease fittings and brass bushings reduce wear and simplify maintenance Black powder coat finish protects against rust and corrosion Handle assembly included for smooth sidewind operation Specs: Jack type: Two-speed, sidewind Static capacity: 20,000 lb Lift capacity: 12,000 lb Drop leg: Spring-return, dual-pin Outer tube: 4-3/8" square Travel: 26-1/2" total Screw travel: 13-1/2" Drop leg travel: 13" Footplate: 9" x 9" with drainage Finish: Black powder coat Mount: Weld-on
Replace the power unit for your etrailer or Ram hydraulic trailer jack or scissor hoist system. Dual-action system powers both up and down. Reservoir has 4-qt capacity. Includes remote control.Features: Replaces the power unit for your etrailer or Ram hydraulic trailer jack or scissor hoist system Powers jack both up and down Includes remote control with 12' cord Works with 12V DC RV/marine trailer battery (not included) Specs: 1.6KW 12V DC motor Reservoir capacity: 4 quarts Working pressure: Extension: 3,200 psi Retraction: 1,500 psi Dimensions: 16" long x 7-1/8" wide x 8-1/8" tall
Replaces the ACME threaded rod and threaded nut on your etrailer or Ram square, direct-weld jack with a 10,000-lb lift capacity and a 12,000-lb static capacity. Designed for TJD-12000 Series jacks.Features: Replaces the threaded ACME rod and lift nut from your etrailer and Ram square, direct-weld jacks with a 10,000-lb lift capacity and a 12,000-lb static capacity Designed for TJD-12000 Series jacks Includes: 1 ACME rod 1 Lift nut Specs: Lift capacity: 10,000 lbs Static capacity: 12,000 lbs Overall dimensions of rod: 17-3/4" long x 1" diameter Lift nut fits 3-1/2" x 3-1/2" square jack inner tube Note: This replacement rod and nut will not work on your jack if you do not have an octagonal bushing as shown below - typically if your jack is older than 2014.
Drop leg adds 8" of additional lift for your etrailer or Ram A-frame jack with a 2" diameter inner tube. Extension can be adjusted in 2" increments. Corrosion-resistant, zinc-plated finish. ... Features: Drop leg increases overall extension by 8" for maximum adjustability Works with etrailer and Ram 2,000 lb topwind or sidewind jacks Also works with 5,000-lb topwind jack TJA-5000-B Zinc-plated finish resists corrosion Includes pin and clip Specs: Footplate diameter: 5-1/4" Tube diameter: 1-3/4" Height: 13-1/4" from bottom of foot to top of tube 2" From center of hole to center of hole Pin diameter: 3/8" 1-Year warranty
Replaces the drop leg and footplate for your etrailer or Ram square, direct-weld trailer jack with a 3,000-lb capacity. Designed for TJD-5000 Series jacks.Features: Replaces the drop leg and footplate for your etrailer or Ram square, direct-weld jack with a 3,000-lb lift capacity Designed for use with Ram TJD-5000 Series jacks Tube outer width: 1-3/4" Drop leg travel: 13-1/2" Footplate dimensions: 7-1/2" long x 3-3/4" wide Mounting hole spacing: 3-3/8" from center of hole to center of hole 3-1/2" Between center of hole on bottom and center of nearest hole Pin hole diameter: 5/8"
Replaces the gears and roll pins on your etrailer or Ram square, direct-weld trailer jack with a 10,000-lb lift capacity. Designed for TJD-12000 Series jacks.Features: Replacement gear kit works with etrailer and Ram square, direct-weld jacks that have a 10,000-lb lift capacity Designed for use with TJD-12000 Series jacks Kit includes 2 gears and 2 roll pins
Replaces the cover on your etrailer or Ram electric A-frame jack (EJ-3520-BBX).Features: Replaces the cover with light lens on your etrailer or Ram electric A-frame jack (EJ-3520-BBX) Includes manual override cap Does not include switches Black color Quantity: 1 cover
Replacement handle shaft fits etrailer and Ram square, direct-weld jacks with a 10,000-lb lift capacity. Durable, zinc finish resists corrosion. Designed for TJD-12000 Series jacks.Features: Replaces the handle shaft on your etrailer or Ram square, direct-weld jack with a 10,000-lb lift capacity Crank handle attaches to this shaft Designed for TJD-12000 Series jacks Includes hardware Overall dimensions: 12" long x 1" diameter
Replaces the 2" x 2" drop leg and footplate from your etrailer or Ram square, direct-weld trailer jack with a 7,000-lb capacity. Designed for TJD-7000 Series jacks.Features: Replaces the drop leg and foot from your etrailer or Ram square, direct-weld jack with a 7,000-lb capacity Designed for use with TJD-7000 Series jacks Offers an additional 13-1/2" of travel Durable zinc finish resists corrosion Specs: Tubing dimensions: 2" x 2" Footplate dimensions: 8" long x 6" wide Distance between adjustement pin holes center to center: 3-3/8" Overall height: 17-3/4"
Replaces the jack foot on your etrailer or Ram 2,000-lb jack with a 2-1/4" outer tube. Attaches to 2" inner tube with included pin and clip. ... Features: Replaces the footplate on your etrailer or Ram 2,000-lb jack Clear zinc finish resists corrosion Includes pin and clip Specs: Application: etrailer and Ram trailer jacks with a 2-1/4" outer tube and a 2" inner tube Footplate dimensions: 6-1/4" long x 4-1/2" wide Pin diameter: 3/8" Height: 1-3/4" From bottom of foot to top of tube 1-1/4" From bottom of foot to center of pin hole 1-1/16" From bottom of tube (where welded to plate) to center of pin hole 1-Year warranty
Replaces the gears and roll pins on your etrailer or Ram square, direct-weld, sidewind jack with a 5,000-lb or 7,000-lb capacity. Designed for TJD-5000S and TJD-7000S Series jacks.Features: Replacement gears and roll pins work with etrailer and Ram square, direct-weld, sidewind jacks that have a 5,000-lb or 7,000-lb capacity Designed for use with Ram TJD-5000S and TJD-7000S Series jacks Kit includes 2 gears and 2 roll pins
... Designed for TJD-12000 Series jacks.Features: Replaces the sidewind crank handle from your etrailer or Ram square, direct-weld jack with a 10,000-lb or 12,000-lb lift capacity Designed for TJD-12000 Series jacks Durable steel construction with black powder coat finish Mounting hardware included
Replacement gearbox fits etrailer and Ram 2-speed square jacks with a 10,000-lb capacity.Features: Replaces the gearbox on your 2-speed jack Designed for use with etrailer and Ram 2-speed jacks with a 10,000-lb capacity Small gearbox is compact to reduce interference and provides a sleek look Hardware is included
Replace the power unit for your etrailer or Ram hydraulic trailer jack or scissor hoist system. Dual-action system powers both up and down. Reservoir has 8-qt capacity. Includes remote control.Features: Replaces the power unit for your etrailer or Ram hydraulic trailer jack or scissor hoist system Powers jack both up and down Includes remote control with 12' cord Works with 12V DC RV/marine trailer battery (not included) Specs: 1.6KW 12V DC motor Reservoir capacity: 8 quarts Working pressure: Extension: 3,200 psi Retraction: 1,500 psi Dimensions: 25-1/2" tall x 6-3/4" square
Replaces the sidewind handle from your etrailer or Ram square, direct-weld, sidewind jack with a 7,000-lb capacity. Handle arm has a corrosion-resistant, zinc finish. Includes pins, bushings, and gear.Features: Replaces the sidewind handle on your etrailer or Ram square, direct-weld, sidewind jack with a 7,000-lb capacity Designed for TJD-7000S Series jacks Durable, zinc-finished handle arm resists corrosion Includes handle, pins, bushings, and gear
Plunger pin secures the drop leg on your etrailer or Ram square, direct-weld trailer jack with a 10,000-lb lift capacity. Includes spring and cotter pin.Features: Plunger pin secures the drop leg on your etrailer or Ram square, direct-weld trailer jack with a 10,000-lb lift capacity Designed for TJD-12000 Series jacks Assembly includes pin, spring and cotter pin
Replaces the drop leg return spring on your etrailer or Ram square, direct-weld trailer jack with a 10,000-lb lift capacity. Designed for TJD-12000 Series jacks.Features: Replaces the drop leg return spring from your etrailer or Ram square, direct-weld trailer jack with a 10,000-lb capacity Designed for use with TJD-12000 Series models
... Designed for TJD-7000S Series jacks.Features: Replaces the sidewind handle on your etrailer or Ram square, direct-weld, sidewind jack with a 3,000 - 7,000-lb capacity Designed for TJD-5000S and TJD-7000S Series jacks Durable, zinc-finished handle arm resists corrosion
Replaces the manual emergency crank handle for your electric A-Frame jack (EJ-3520-BBX or EJ-3520-WBX). Includes 10 mm socket on end of crank handle.Features: Replaces the manual emergency crank handle for your electric A-Frame jack (EJ-3520-BBX or EJ-3520-WBX) Includes 10 mm socket on end of crank handle
Filters
