Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
Hey Ron! Sorry to hear that happened. Have you asked them to replace it? The Mighty Cord Replacement RV Power Inlet #A10-30INBKVP door isn't available separately but it can be replaced. You can remove the four screws from the cover which will…
view full answer...The MB Sturgis Propane Adapter Hose - 3/8" Male NPT x 1/2" Female Flare Swivel uses a 3/8" fitting on the regulator side and 1/2" fitting on the manifold side. These are nominal fitting sizes so they don't actually measure…
view full answer...Hey Gus, you can carry a propane tank or a gas can on the etrailer cargo carrier part #e98874 even though when you think about it does seem a little sketchy. There are no laws against it and as long as you are smart and safe about it it's totally…
view full answer...I checked with Lippert and the part number you mentioned corresponds with the Revolution Kwikee step and the replacement control module you need then is the part #LC363985.
view full answer...Hey Tim, the RV propane manifolds like the part #JR65CR are supposed to be installed on exterior of the trailer. As far as the location I would recommend finding a HVAC guy in your area to install it to make sure it's all up to code and the…
view full answer...We are still waiting to get a set of digital install instructions for the Coleman Mach Under Bench AC units like the #CM82RR that you referenced. As soon as they are available we will have them linked on the product page but the kit does come with a…
view full answer...Hi Bill; since you're running to a single appliance you can use the JR Products RV LP Gas Manifold - 3 Port #JR45CR. You will also need #JR52CR or #JR32CR to make the connections along with the JR Products RV LP Gas Manifold Hose Disconnect Tool…
view full answer...Yes, this will work for your needs as the Horizontal Low Pressure 2-Stage RV LP Gas Regulator, #37207-30385 is designed to operate in the 9" to 11" W.C. range. You may want to also consider the Horizontal RV LP Gas Regulator Cover,…
view full answer...The best replacement option we offer for a Atwood GC10A-4E Water Heater is tankless, the Furrion RV Tankless Water Heater part #FR68SR. It won't be a direct replacement but still pretty easy nonetheless as they are very similar. That said, you…
view full answer...Hey Cheryl, Yes, the Self-Contained Hydraulic Jack #e33VV could be bolted the frame of your horse trailer to upgrade you to a motorized jack. This jack has a 12,000lb capacity so you'll want to verify what your pin weight is to ensure it falls…
view full answer...Yes, the MORryde X-Factor Crosmember for CRE, SRE, or Stock Leaf Spring Suspension #MR33WR will work with the Road Armor Shock Absorbing Equalizer Kit #LC696740. I have also attached a review video for you to check out about the Lippert Road Armor.
view full answer...Hey Richard, thanks for reaching out! Yes, the MORryde X-Factor Crossmember for Standard Frame Hangers #MR33WR can be installed with the Roadmaster Comfort Ride #RM-2460-2570. Just as long as the X-Factor is installed on either of the end hangers as…
view full answer...