Replace 1 of the spring seat weldments for your Dexter Over-Under conversion kit (K71-385-00) for 3" diameter axle tubes.Features: Replace 1 of the spring seat weldments for your Dexter Over-Under conversion kit (K71-385-00) for 3" diameter axle tubes Fits: Dexter Over-Under conversion kit: K71-385-00
Replaces the spring seat needed for your Dexter trailer springs over-under conversion kit (K71-384-00).Features: Replaces the spring seat needed for your Dexter trailer springs over-under conversion kit (K71-384-00) Fits 2-3/8" axle Quantity: 1 spring seat
Waterproof trailer light kit includes 2 combination tail lights that serve 7 functions on trailers under 80" wide. Universal mount with stainless steel hardware and included license plate bracket. 25' wiring harness with 4-pole connector.Features: Rectangular combination tail lights serve 7 functions when properly mounted on trailers under 80" wide Stop, turn, tail, side marker, side reflector, rear reflector, and license plate light Built-in license plate light on driver's side light Waterproof housing and lens unit is submersible Great for marine trailer applications LEDs make great replacements for incandescent lights No bulbs to replace No brittle filaments Corrosion-resistant license plate bracket Durable polycarbonate housing and acrylic lens Red lens over clear LEDs Universal mount Stainless steel mounting hardware included 25' Wiring harness with 4-pole connector DOT approved Specs: Application: trailers under 80" wide Driver side: STL57RB Passenger side: STL56RB Light dimensions: 6-1/16" wide x 3-5/8" tall x 2-1/4" deep Number of diodes: Driver's side: 23 Passenger's side: 18 Power draw at 12.8 volts: Stop and turn lights: 0.268 amps Side marker lights: 0.059 amps Lifetime warranty on LEDs Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
Waterproof trailer light kit includes 2 combination tail lights that serve 7 functions on trailers under 80" wide. Stud mount with stainless steel hardware and included license plate bracket. 25' wiring harness with 4-pole connector.Features: Square combination tail lights serve 7 functions when properly mounted on trailers under 80" wide Stop, turn, tail, side marker, side reflector, rear reflector, and license plate light Built-in license plate light on driver's side light Sealed, waterproof construction is submersible Durable surface-mount diode (SMD) construction of LED circuit board Better withstands shock and vibration Allows for improved heat distribution LEDs make great replacements for incandescent lights No bulbs to replace No brittle filaments Corrosion-resistant license plate bracket Durable polycarbonate housing and acrylic lens Red lens over clear LEDs Stud mount Stainless steel mounting hardware included 25' Wiring harness with 4-pole connector DOT approved Specs: Application: trailers under 80" wide Driver side: STL39RB Passenger side: STL38RB Light dimensions: 5-1/16" long x 4-9/16" tall x 2-5/8" deep Light face: 4-9/16" x 4-9/16" Distance between mounting studs (center on center): 2" Diodes: Driver's side: 10 Passenger's side: 7 Power draw at 12.8 volts: Stop and turn lights: 0.259 amps Side marker lights: 0.062 amps Lifetime warranty on LEDs Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
You're on the highway when a strong crosswind hits and your trailer starts to sway. It's the kind of trouble that's flipped plenty of rigs. These rubber springs absorb that shove, keeping the trailer steady and your truck in control.Long-Term Durability: Corrosion-resistant components and high-density rubber built for years of towing under load. Features to know about Does Timbren RV SES Suspension Improve Your Drive? When you're towing, small shifts in weight can make your trailer move more than you expect.
Designed for trailers with spring over axle configurations that have a 2-3/8" to 3" diameter. Hollow rubber springs sit above the axle, helping to stabilize and level the trailer while absorbing road shock and reducing sway.The inch of clearance allows the existing factory suspension to operate normally under light loads and standard terrain, ensuring the smooth, comfortable ride you are used to. Timbren Suspension Enhancement Systems are designed to work progressively.
... Incandescent trailer light kit provides all legal lighting and reflectors for trailers under 80". Includes combination tail lights and side markers. Stud mount with included hardware. 20' Harness. PC rated.Features: Trailer light kit provides all legal lighting and reflectors for trailers under 80" wide 2 Square combination tail lights provide 6 functions Stop, tail, turn, side marker, side reflex, and rear reflex Built-in license plate light on driver's-side light illuminates license plate 2 Rectangular marker lights are included to provide rear clearance light function Built-in reflex reflector removes the need for a separate reflector Incandescent bulb can be easily replaced Compatible with 12V DC systems Mounts on surface of trailer with included studs Includes license plate bracket for mounting driver's side light 20' Wiring harness for making connections DOT compliant PC rated Made in the USA Specs: Tail lights: Dimensions: 4-3/4" long x 4-1/2" tall x 2-13/16" deep Distance between mounting studs (center on center): 2" Power draw at 12V: 2.2 amps Bulb type: 1157 and 168 Clearance lights: Dimensions: 2-3/4" long x 2-1/8" tall x 1" deep Power draw at 12V: 0.25 amps Bulb type: 194 1-Year limited warranty Manufacturer Cross Reference Light will work as an exact replacement for: Wesbar # 7504 Optronics # TL27BK PC-Rated Lights A PC-rated light produces a 90-degree angle of light to either side of its centerline for a total of 180 degrees of coverage.
12-3/4" Low-profile, LED tail light displays brake, tail, and turn signals on your RV that's under 80" wide. It mounts on the surface of the motorhome and hardwires with the included pigtail harness.Features: Low-profile RV brake, turn, and tail light Weatherproof White LEDs with red lens More efficient and durable than incandescent bulbs Polycarbonate lens and housing Surface mount Hardware not included Can be mounted in vertical or horizontal orientation 3-Wire pigtail White wire for ground Red wire for brake light Black wire for tail light DOT and SAE compliant Specs: For motorhomes that are under 80" wide Dimensions: 12-3/4" long x 1-1/2" tall x 3/4" thick Distance between mounting holes (center on center): 11-1/2" Diodes: 20 2-Year warranty
Designed for highway trailers with an underbody steel frame. Hollow rubber springs sit above the axle, helping to stabilize and level the trailer while also absorbing road shock. Sway is reduced and trailer tracking behind the vehicle is improved.The inch of clearance allows the existing factory suspension to operate normally under light loads and standard terrain, ensuring the smooth, comfortable ride you are used to. Timbren Suspension Enhancement Systems are designed to work progressively.
Double-eye leaf spring acts as part of a trailer's suspension system by providing an attachment point for a 3,500-lb axle. Spring flexes to resist shock and also ensures a smooth ride. Includes bushings with 9/16" inner diameter.
This incandescent trailer light kit comes with everything needed to properly light your trailer. 2 Tail lights, 2 amber clearance lights, 2 amber reflectors, license plate bracket, 25' wiring harness with 4-pole connector, and mounting hardware.The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board. Combination Lights for Trailers Over 80" Wide If a trailer is 80" or wider at its widest point, then it requires rear clearance lights in addition to basic trailer lights.
This waterproof identification light bar with 3 lights is 15-15/16" long and designed for trailers wider than 80". Durable polycarbonate housing and lens. Surface mounts to trailer - hardware not included. 2-Wire design. DOT approved.Features: LED trailer light functions as an identification light bar for trailers wider than 80" 3 Optronics AL91 series lights are replaceable (AL91RB - sold separately) Sonically sealed, waterproof housing and lens unit is submersible LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate lens and housing Red lens over white LEDs Surface mounts on trailer - hardware not included 2-Wire design includes power lead and ground wire DOT compliant Specs: Dimensions: 15-15/16" long x 1-1/2" tall x 1-5/8" thick Distance between mounting holes (center on center): 7-1/2" Diodes: 9 Power draw at 12.8V: 0.153 amps Wire length: 50" LIfetime warranty on LEDs Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
14-1/4" Long x 1-3/16" tall x 1-5/16 deep. Waterproof identification light bar with 3 replaceable red 3-LED lights is designed for trailers wider than 80". Polycarbonate lens and stainless steel base. Surface mount. Single-wire design.
7-7/8" x 3-1/4". Waterproof light acts as brake, tail, turn, side marker, side reflex reflector, rear clearance, and rear reflex reflector for trailers wider than 80". Surface mount with included hardware. 3-Wire pigtail. PC rated.Features: Rectangular trailer tail light provides stop, turn, and tail light functions Built-in side marker and rear clearance light with reflex reflectors Sealed, waterproof construction is submersible Light is designed specifically for boat trailers LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable plastic housing Red lens over white LEDs Mounts on surface of trailer - hardware included 3-Wire pigtail White wire is for ground Brown wire is for the tail lights Green wire is for the stop and turn lights PC rated light produces a 180-degree beam pattern DOT compliant Specs: Configuration: passenger's side (right-hand side) Driver side: STL37RB (sold separately) Dimensions: 7-7/8" long x 3-1/4" tall x 2-7/8" deep Diodes: 17 Power draw at 12.8 volts: Stop/turn signal light: 0.181 amps Side marker light: 0.047 amps Lifetime warranty on LEDs Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
7-7/8" x 3-1/4". Low-profile tail light acts as brake, tail, turn, side marker, side reflex reflector, rear clearance, rear reflex reflector, and license plate for trailers wider than 80". Surface mount. Molded 2-way plug. PC Rated.Features: Low-profile trailer tail light serves 8 functions Stop light, tail light, turn signal light, side marker light, side reflex reflector, rear clearance light, rear reflex reflector, and license plate light Sealed, waterproof construction is submersible Light is designed specifically for boat trailers LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable plastic housing Red lens over white LEDs Mounts on surface of trailer - hardware included Molded 2-way plug and separate ground wire DOT compliant PC rated Specs: Configuration: driver's side (left-hand side) Passenger's-side light (STL36RB) sold separately Dimensions: 7-7/8" long x 3-1/4" tall x 2-7/8" deep Diodes: 23 Power draw at 12.8 volts: Stop/turn signal light: 0.181 amps Side marker light: 0.047 amps Lifetime warranty on LEDs Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
20-1/2" x 1". 4-Function, waterproof light acts as brake, tail, turn, and backup light. Red lens set inside clear lens. Mounts to trailer surface - hardware not included. 4-Wire pigtail. DOT compliant. 19 Diodes.Features: Low-profile trailer tail light serves 4 functions on trailers over 80" wide Stop light Tail light Turn signal light Built-in backup light eliminates the need to cut holes in your trailer for 2 lights Sonically sealed, waterproof housing and lens unit is submersible Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibration Allows for improved heat distribution LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate lens and housing Red lens set inside white lens with red and white LEDs Red lens with red LEDs for tail light Clear lens with white LEDs for backup light Compatible with 12V DC systems Surface mounts to trailer - hardware not included 4-Wire pigtail White wire for ground Brown wire for backup light Red wire for brake light Black wire for tail light DOT compliant SAE compliant for trailers over 80" wide Specs: Overall dimensions: 20-1/2" long x 1" tall x 3/4" deep Number of diodes: 19 Power draw at 12.8 volts: Stop/turn signal light: 0.265 amps Tail light: 0.24 amps Backup light: 0.3 amps Wire functions Black: tail light Red: stop/turn Yellow: backup White: ground Quantity: 1 light Lifetime warranty on LEDs Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
20-1/2" x 1". 4-Function, waterproof light bar acts as brake, tail, turn, and backup light. Red lens set inside clear lens. Mounts to trailer surface - hardware not included. 4-Wire pigtail. DOT compliant. 19 Diodes.Features: Low-profile trailer tail light serves 4 functions on trailers over 80" wide Stop light Tail light Turn signal light Built-in backup light eliminates the need to cut holes in your trailer for 2 lights Sonically sealed, waterproof housing and lens unit is submersible Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibration Allows for improved heat distribution LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate lens and housing Clear lens with red and white LEDs Clear lens with red LEDs for tail light Clear lens with white LEDs for backup light Surface mounts to trailer - hardware not included 4-Wire pigtail White wire for ground Brown wire for backup light Red wire for brake light Black wire for tail light DOT compliant SAE compliant for trailers over 80" wide Specs: Overall dimensions: 20-1/2" long x 1" tall x 3/4" deep Distance between mounting holes (center on center): 19-5/8" Diodes: 19 Power draw at 12.8 volts: Stop/turn signal light: 0.265 amps Tail light: 0.24 amps Backup light: 0.3 amps Lifetime warranty on LEDs Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
8-1/16" x 2-7/8". Waterproof light acts as brake, tail, turn, side marker, side reflex reflector, rear clearance, rear reflex reflector, and license plate for trailers wider than 80". Surface mount. 3-Wire pigtail. P2PC Rated.The circuit board is sealed, which means that water will not damage the diodes or circuit board. Combination Lights for Trailers Over 80" Wide If a trailer is 80" or wider at its widest point, then it requires rear clearance lights in addition to basic trailer lights.
6-1/16" x 3-3/4". Waterproof, incandescent light serves 8 functions on trailers over 80" wide: brake, tail, turn, side marker, side reflector, rear clearance, rear reflector, and license plate light. Stud mount. 3-Wire design.The circuit board is sealed, which means that water will not damage the diodes or circuit board. Combination Lights for Trailers Over 80" Wide If a trailer is 80" or wider at its widest point, then it requires rear clearance lights in addition to basic trailer lights.
14-1/4" Long x 1-3/16" tall. Waterproof identification light bar with 3 replaceable incandescent lights is designed for trailers wider than 80". Polycarbonate lens and stainless steel base. Surface mount. Male 0.180 bullet.
18" Low-profile, LED tail light displays brake, tail, and turn signals on your RV that's over 80" wide. It mounts on the surface of the motorhome and hardwires with the included pigtail harness.Features: Low-profile RV brake, turn, and tail light Weatherproof White LEDs with red lens More efficient and durable than incandescent bulbs Polycarbonate lens and housing Mounts on surface of trailer Hardware not included Can be mounted in vertical or horizontal orientation 3-Wire pigtail White wire for ground Red wire for brake light Black wire for tail light DOT and SAE compliant Specs: For motorhomes that are over 80" wide Dimensions: 18" long x 1-1/2" tall x 3/4" thick Distance between mounting holes (center on center): 15-7/8" Diodes: 20 2-Year warranty
Filters
