Easily move your boat's outboardmotor with this dolly. Motor clamps onto the mounting block on the top of the dolly's frame. Great for holding your motor during maintenance or repairs. ... Features: Dolly lets you easily move your boat's outboardmotor Tall enough to hold even a long-shaft outboardmotor Also great for repair or general maintenance of your motor Synthetic wood block provides sturdy mounting point for motor Tighten motor's clamps down onto wood block to limit movement and noise Weather-resistant material won't rot like natural wood Large wheels roll over thick grass or rough gravel 14-Gauge, powder coated steel is durable and corrosion resistant Collapsing design - stow dolly away in your garage Specs: Maximum weight capacity: 250 lbs Overall height: 45" Wheel diameter: 8" Caster diameter: 4"
Keep your trolling motor secured to your boat while it's not in use with this this tie-down. Strap is sturdy and easy to operate, allowing you to quickly lower or raise a trolling motor and safely hold it down during transport and storage.Features: Secures your trolling motor while not in use Strap loops around motor and through itself, then buckles down to tighten SUR-Grip rubber-coated release handle is easy to grip and control with one hand Seat-belt-quality polyester webbing Specs: Strap dimensions: 2" wide x 13-1/2" long 1-Year limited warranty
Clamp this durable steel, folding spare tire carrier onto your trailer or RV bumper. Fits 4" wide, rear, box-style bumpers. Holds most standard automotive and camper tires.Features: Provides removable mounting point on your trailer or motor home rear bumper for a spare tire Swings down to allow quick, easy access to rear storage Remove pull pin at base and fold carrier down Holds most Kelsey-Hayes-style 5-, 6- and 8-lug automotive wheels and Fayette-type travel trailer wheels Will not fit 5-on-5 bolt pattern wheels Not for Class A or C motorhome tires or dual rim wheels Clamps onto 4" wide box bumpers Constructed of heavy-duty steel Powder coated for premium rust resistance Capacity: 60 lbs Lifetime warranty
Tire with automotive-grade tread has an 8-ply rating and a 2,150-lb max load at 65 psi. 3-Step powder coat resists rust. Complimentary roadside assistance included. Assembly is match mounted and balanced providing longevity and a smooth ride.The wheel is first submerged in a zinc phosphate bath to ensure good paint adhesion. It is then e-coated with an acrylic primer base and the outboard side is finished with baked-on DuPont powder paint. The light e-coat on the inboard side of the wheel reduces friction between the wheel and your hub and eliminates the flaking that can occur with a heavily applied paint finish.
Radial tire with automotive-grade tread has an 8-ply and a 2,540-lb max load at 65 psi. 3-Step powder coat finish provides rust resistance. Complimentary roadside assistance included. Assembly is match mounted and balanced providing a smooth ride.The wheel is first submerged in a zinc phosphate bath to ensure good paint adhesion. It is then e-coated with an acrylic primer base and the outboard side is finished with baked-on DuPont powder paint. The light e-coat on the inboard side of the wheel reduces friction between the wheel and your hub and eliminates the flaking that can occur with a heavily applied paint finish.
This 12" x 4" steel trailer wheel has a 5 on 4-1/2 bolt pattern. 3-Step powder coat finish provides rust resistance and improved torque retention keeps wheel secure when mounted on your axle. Valve stem is included.The wheel is first submerged in a zinc phosphate bath to ensure good paint adhesion. It is then e-coated with an acrylic primer base and the outboard side is finished with baked-on DuPont powder paint. The light e-coat on the inboard side of the wheel reduces friction between the wheel and your hub and eliminates the flaking that can occur with a heavily applied paint finish.
Radial tire with automotive-grade tread has a 10-ply rating and a 3,520-lb max load at 80 psi. 3-Step powder coat resists rust. Complimentary roadside assistance included. Assembly is match mounted and balanced providing longevity and a smooth ride.The wheel is first submerged in a zinc phosphate bath to ensure good paint adhesion. It is then e-coated with an acrylic primer base and the outboard side is finished with baked-on DuPont powder paint. The light e-coat on the inboard side of the wheel reduces friction between the wheel and your hub and eliminates the flaking that can occur with a heavily applied paint finish.
This 15" x 6" steel trailer wheel has a 5 on 4-1/2 bolt pattern and a 3.19" pilot diameter. Improved torque retention keeps wheel secure when mounted on your axle. Rust-resistant, 3-step powder coat finish. Valve stem is included.The wheel is first submerged in a zinc phosphate bath to ensure good paint adhesion. It is then e-coated with an acrylic primer base and the outboard side is finished with baked-on DuPont powder paint. The light e-coat on the inboard side of the wheel reduces friction between the wheel and your hub and eliminates the flaking that can occur with a heavily applied paint finish.
This 12" x 4" steel trailer wheel has a 5 on 4-1/2 bolt pattern. 3-Step powder coat finish provides rust resistance and improved torque retention keeps wheel secure when mounted on your axle. Valve stem is included.The wheel is first submerged in a zinc phosphate bath to ensure good paint adhesion. It is then e-coated with an acrylic primer base and the outboard side is finished with baked-on DuPont powder paint. The light e-coat on the inboard side of the wheel reduces friction between the wheel and your hub and eliminates the flaking that can occur with a heavily applied paint finish.
Radial tire with automotive-grade tread has an 8-ply rating and a 2,540-lb max load at 65 psi. Rust-resistant 3-step powder coat. Complimentary roadside assistance included. Match mounted and balanced assembly provides longevity and a smooth ride.The wheel is first submerged in a zinc phosphate bath to ensure good paint adhesion. It is then e-coated with an acrylic primer base and the outboard side is finished with baked-on DuPont powder paint. The light e-coat on the inboard side of the wheel reduces friction between the wheel and your hub and eliminates the flaking that can occur with a heavily applied paint finish.
This 12" x 4" steel trailer wheel has a 4 on 4 bolt pattern and a 2.82" pilot diameter. Improved torque retention keeps wheel secure when mounted on your axle. Rust-resistant, 3-step powder coat finish. Valve stem is included.The wheel is first submerged in a zinc phosphate bath to ensure good paint adhesion. It is then e-coated with an acrylic primer base and the outboard side is finished with baked-on DuPont powder paint. The light e-coat on the inboard side of the wheel reduces friction between the wheel and your hub and eliminates the flaking that can occur with a heavily applied paint finish.
Radial tire with automotive-grade tread has an 8-ply rating and 2,540-lb max load at 65 psi. Rust-resistant 3-step powder coat. Complimentary roadside assistance included. Assembly is match mounted and balanced providing longevity and a smooth ride.The wheel is first submerged in a zinc phosphate bath to ensure good paint adhesion. It is then e-coated with an acrylic primer base and the outboard side is finished with baked-on DuPont powder paint. The light e-coat on the inboard side of the wheel reduces friction between the wheel and your hub and eliminates the flaking that can occur with a heavily applied paint finish.
This 12" x 4" steel trailer wheel has a 5 on 4-1/2 bolt pattern. 3-Step powder coat finish provides rust resistance and improved torque retention keeps wheel secure when mounted on your axle. Valve stem is included.The wheel is first submerged in a zinc phosphate bath to ensure good paint adhesion. It is then e-coated with an acrylic primer base and the outboard side is finished with baked-on DuPont powder paint. The light e-coat on the inboard side of the wheel reduces friction between the wheel and your hub and eliminates the flaking that can occur with a heavily applied paint finish.
This universal-fit tire carrier from Stromberg Carlson boasts superior strength and is an excellent tool for all travelers.Features: Provides removable mounting point on your trailer or motor home rear bumper for a spare tire Fits most 5-, 6- and 8- lug wheels Not for Class A or Class C tires or dual rim wheels Clamps onto bumper for easy installation Top bolt and lug nut attach through a bolt hole on the wheel Bottom bolt, plate and nut further secure the wheel through the larger center hole Includes U-bolts and lug nuts Specs: Application: 15" to 16" tires Fits 4" square bumpers Overall height: 18-1/4" Measurement from top of trailer mount bracket to center of tire-mount bracket: 9-1/2" 1-Year limited warranty
Help keep your boat in place when it's loaded on your trailer with this zinc-plated swivel bracket. Bolt the steel piece onto a bolster bracket on your trailer so your bunk tilts toward the hull to keep your boat cradled safely for transport.Features: Swivel bracket tilts your trailer's bunk board when your boat is loaded for transport Allows the bunk to snugly cradle your boat's hull Must be used with a bolster bracket and an additional swivel-and-bolster bracket set (sold separately) for 1 bunk board Bolt-on installation Attaches to bolster bracket on your trailer Mounting hardware not included 11-Gauge, zinc-plated steel resists rust and corrosion Made in the USA Specs: Quantity: 1 swivel bracket Dimensions: 1-3/8" wide x 1-7/8" tall x 3-1/2" long Mounting hole diameter: 1/2"
Rust-resistant assemblies let you install 2 bunk boards on your boat trailer. Swivel brackets enable bunks to tilt when loading a boat. Mounting slots allow for height adjustment. Dimpled surfaces keep brackets from sliding along the trailer frame.Features: Bolster-and-swivel bracket assemblies allow you to install 2 bunk boards on your boat trailer Dimpled bolster bracket surfaces help prevent the brackets from sliding along the trailer frame Mounting slots permit as much as 3-3/4" of height adjustment during installation Each bolster bracket installs vertically on your boat trailer's frame with a U-bolt (sold separately) Strong swivel brackets let you tilt the bunk boards Helps you to fit the boat hull snugly onto trailer during the loading process Hardware is included for attaching the swivel brackets to the bolster brackets 11-Gauge, galvanized steel resists rust and corrosion Suitable for saltwater exposure Made in the USA Specs: Quantity: 4 bracket assemblies Overall height: 9" Dimensions of bolster bracket: 8" tall x 2-1/2" wide Mounting slot dimensions: 2-3/4" long x 1/2" wide Spacing between mounting slots: 1/2" Dimensions of swivel bracket: 3-1/2" long x 1-3/8" wide x 2" tall Flange mounting hole diameters: 3/8" Flange mounting hole spacing: 2-1/2" apart on center Bolster-and-swivel-bracket assemblies are typically mounted upright on a boat trailer's crossmembers.
Help keep your boat in place when it's loaded on your trailer with this zinc-plated swivel bracket. Bolt the steel piece onto a bolster bracket on your trailer so your bunk tilts toward the hull to keep your boat cradled safely for transport.Features: Swivel bracket tilts your trailer's bunk board when your boat is loaded for transport Allows the bunk to snugly cradle your boat's hull Must be used with a bolster bracket and an additional swivel-and-bolster bracket set (sold separately) for 1 bunk board Bolt-on installation Attaches to bolster bracket on your trailer Mounting hardware not included 11-Gauge, zinc-plated steel resists rust and corrosion Made in the USA Specs: Quantity: 1 swivel bracket Dimensions: 1-3/8" wide x 1-7/8" tall x 3" long Mounting hole diameter: 1/2"
... Swivel bracket sold separately.Features: Bolster bracket lets you attach a swivel bracket (sold separately) for mounting a bunk board to your boat trailer 2 Brackets are required per bunk board (additional bracket sold separately) Extra-sturdy connection to trailer frame ensures support for the bunk board Bracket attaches with 2 U-bolts (sold separately), as opposed to a standard bracket that attaches with 1 U-bolt Mounting slots permit as much as 3" of height adjustment during installation Bracket installs vertically on your boat trailer's frame 7-Gauge, galvanized steel resists rust and corrosion Suitable for saltwater exposure Made in the USA Specs: Quantity: 1 bracket Overall dimensions: 9-3/4" tall x 4" wide Mounting slot dimensions: 3" long x 1/2" wide Horizontal spacing between slots: 1-1/4" Vertical spacing between slots: 1/2" Swivel bracket mounting hole diameter: 1/2" Bolster brackets are typically mounted upright on a boat trailer's crossmembers.
Rust-resistant assemblies let you install 2 bunk boards on your boat trailer. Swivel brackets enable bunks to tilt when loading a boat. Mounting slots allow for height adjustment. Dimpled surfaces keep brackets from sliding along the trailer frame.Features: Bolster-and-swivel bracket assemblies allow you to install 2 bunk boards on your boat trailer Dimpled bolster bracket surfaces help prevent the brackets from sliding along the trailer frame Mounting slots permit as much as 3-3/4" of height adjustment during installation Each bolster bracket installs on your boat trailer's frame with a U-bolt (sold separately) Strong swivel brackets let you tilt the bunk boards Helps you to fit the boat hull snugly onto trailer during the loading process Hardware is included for attaching the swivel brackets to the bolster brackets 11-Gauge, galvanized steel resists rust and corrosion Suitable for saltwater exposure Made in the USA Specs: Quantity: 4 bracket assemblies Overall height: 13" Dimensions of bolster bracket: 12" tall x 2-1/2" wide Mounting slot dimensions: 4-3/4" long x 1/2" wide Spacing between mounting slots: 1/2" Dimensions of swivel bracket: 3-1/2" long x 1-3/8" wide x 2" tall Flange mounting hole diameters: 3/8" Flange mounting hole spacing: 2-1/2" apart on center Bolster-and-swivel-bracket assemblies are typically mounted upright on a boat trailer's crossmembers.
Replace your bow roller assembly with this complete kit. Includes a 4" roller, 2 end bells, and corrosion-resistant hardware. Black TPR material is stronger than rubber and softer than polyurethane.This complete bow roller assembly includes 1 roller with 2 matching end bells, plus the hardware you need to mount them on your trailer. Simply attach the assembly to the existing bracket on your boat trailer and you're all set! The TPR construction provides ultimate durability and strength over standard rubber rollers.
Built for mounting a bunk board on your boat trailer, this rust-resistant bunk bracket allows the bunk to pivot when you're loading your boat. Slotted mounting hole lets you adjust the bunk height. Use 2 brackets for each board.Features: Light-duty bracket lets you mount a bunk board on your boat trailer Allows your trailer's bunk board to pivot while you load your boat Stabilizes your bunk when 2 brackets are used (additional bracket sold separately) Slotted mounting hole lets you adjust the height during installation Bracket installs vertically on your boat trailer's frame with a U-bolt (sold separately) 11-Gauge, zinc-plated steel resists rust and corrosion Made in the USA Specs: Quantity: 1 bracket Dimensions: 2" wide x 11-3/4" tall x 1-1/2" thick
Keep your boat's bow away from your winch and in line with it while you are trailering. The bracket accepts any 3" to 4" bow roller or Y-stop. 11-Gauge pre-galvanized steel can be painted to match your trailer.Features: Heavy-duty bracket holds a bow stop to protect your winch Designed to fit around a 3-1/2" wide winch Can also be mounted alone on winch stand Accepts 3" - 4" bow roller or Y-stop Bolt-on installation Does not include mounting hardware Sturdy, 11-gauge pre-galvanized steel construction Can be primed and painted to provide even more resistance to corrosion and to match your trailer's paint finish Made in the USA Specs: Quantity: 1 bracket Dimensions: Height: 13-3/16" Inside width: 3-11/16" Outside width: 3-15/16" Typically found on winch stands mounted on trailer tongues, bow roller brackets position a bow roller or Y-stop in front of the winch to prevent the boat's bow from making contact with the winch.
Replace the bow roller assembly on your boat trailer with this durable polyvinyl chloride roller kit. Includes a 4" roller, 2 end bells, and corrosion-resistant hardware. Non-marring material will not leave marks on your boat.Features: Bow roller assembly replaces the bow roller, end bells, shaft, and hardware on your boat trailer Eases loading and unloading of your boat Supports the front of your boat as it rests on your trailer Absorbs road shock while your boat is being towed End bells ensure that your boat does not scrape along bolts or roller bracket Polyvinyl chloride (PVC) construction is durable, non-marring, and corrosion resistant Stronger and longer lasting than rubber Won't leave scratches, scuffs, or marks on your boat's hull Works great in freshwater and saltwater Zinc shaft and hardware with zinc finishes are corrosion resistant Amber color Specs: Application: 4" wide center roller bracket Dimensions (with bells): 8" long x 5-1/4" diameter Shaft diameter: 1/2" PVC Construction Polyvinyl chloride (PVC) is a sturdy material that is great for use on marine trailers.
Rust-resistant assemblies let you install 2 roller bunks on your boat trailer. Swivel brackets enable bunks to tilt when loading a boat. Mounting slots allow for height adjustment. Dimpled surfaces keep brackets from sliding along the trailer frame.Features: Bolster-and-swivel bracket assemblies allows you to install 2 roller bunks on your boat trailer Dimpled bolster bracket surfaces help prevent the brackets from sliding along the trailer frame Mounting slots permit as much as 3-3/4" of height adjustment during installation Each bolster bracket installs on your boat trailer's frame with a single U-bolt (sold separately) Strong swivel brackets let you tilt the roller bunks Helps you to fit the boat hull snugly onto trailer during the loading process Hardware is included for attaching the swivel brackets to the bolster brackets 11-Gauge, galvanized steel resists rust and corrosion Suitable for saltwater exposure Made in the USA Specs: Quantity: 4 bracket assemblies Overall height: 11" Dimensions of bolster bracket: 10" tall x 2-1/2" wide Mounting slot dimensions: 3-3/4" long x 1/2" wide Spacing between mounting slots: 1/2" Dimensions of swivel bracket: 1-1/4" long x 1-3/4" wide x 2" tall Top flange mounting hole diameter: 7/16" Bolster-and-swivel-bracket assemblies are typically mounted upright on a boat trailer's crossmembers.
Filters
