9/16" Diameter shackle bolt is used to mount slipper spring inside hanger. Fluted shank keeps the bolt from turning in the bracket and wearing the bracket out. Sold in pairs. Includes locknuts.
This U-bolt, in conjunction with a U-bolt plate and an additional U-bolt, attaches your round, 7,500-lb axle to your leaf springs. Bolt is 7-3/4" long and has an inner width of 2-1/2".Features: Used with U-bolt plate to secure axle to leaf springs, which are mounted to the trailer frame Untreated steel construction Attaches with a U-bolt plate (sold separately) and an additional U-bolt with same dimensions (sold separately) Fits 7,500-lb, solid-bar, round trailer axles with 2-1/2" diameter Includes 2 nuts Specs: Bolt diameter: 9/16" Length: 7-3/4" Width: 2-5/8"
Replaces 1 locking hex nut for your Dexter E-Z Flex Equalizer kit (K71-658-00, K71-654-00, K71-652-00, K71-656-00). Also works with Dexter slipper spring kits (K71-365-00 or K71-366-00) or tandem axle suspension kit (K71-660-00).Features: Replaces a locking hex nut for your Dexter E-Z Flex Equalizer kit (K71-658-00, K71-654-00, K71-652-00, K71-656-00) Also works with Dexter slipper spring kits (K71-365-00 or K71-366-00) or tandem axle suspension kit (K71-660-00) Thread size: 9/16"-18 fine Quantity: 1 locking hex nut
Hey Mark, since we know your 2022 Imagine 2400BH trailer has 3,500 lb axles the correct bearing kit would be the part #TMK52VR. Bearing replacements are all based on the axle capacity of the trailer. Are you looking to have a spare set on hand or do…
Hey Mordechai! I can help you find replacement leaf springs and shackles but you will have to get some measurements. For the leaf springs you either need to measure the flat length or get the spring eye to spring eye measurement. Both of these are…
Thanks for reaching out, Terry! There are some galvanized leaf springs on the market, but we've found that the Dacromet finish on our leaf springs, like the 25-1/4" Long #e28SR you were looking at, is better because it doesn't flake like…
What's up, Chuck? You can definitely use higher-rated springs for your trailer, and for that I recommend checking out the 25-1/4" Long 4-Leaf Double-Eye Spring for 4,400-lb Trailer Axles #DX95CR. Be sure to change out the leaf springs on…
Anything is possible, including getting you that manual. I've attached the owner's manual for the Tekonsha BRAKE-EVN #TK63VR that you can check out below. Just let us know if you have any other questions.
I pulled a sample of the TruRyde Nylon Bushing #TRBU11508 so that I could take measurements with a precision caliper. In some cases a parts actual dimensions may vary slightly from its description. Keep in mind that its fit depends in part on the eye…
You could replace a double-eye leaf spring with a slipper spring like the #e33SR spring you'd looked at, but it's recommended that you remove the existing rear hanger (assuming it's a single axle trailer) with a rear hanger like #115706S…
Your trailer uses an open eye leaf spring like #e24SR. Over time as the leaf spring softens the gap you are seeing will get bigger. As long as the leaf spring is not falling off the hanger when you raise the trailer weight off the axle they do not…
If there is a tiny bit of play in suspension components that are designed to move you would be fine. 1/16 of an inch isn't very much. Typically there aren't any torque ratings for shackle bolts. We run them down tight or until the knurls are…
Hey Allen, good to hear from you! You can swap to the 30" Slipper Spring #e89SR, but it will require you to get a whole new hanger kit installed on your trailer which means cutting the old ones off and having new ones welded on by a…
You can swap to a double eye leaf spring setup on your trailer but you will need to basically remove and reinstall new hangers that were designed for this type of setup like with the #APT3HD. There MIGHT be a way to modify what you have but it's…
Replaces (1) 9/16"-18 locknut for your Lippert tandem axle lift kit (LC407131).Features: Replaces a 9/16"-18 locknut for your Lippert tandem axle lift kit (LC407131) Quantity: 1 locknut 12 Nuts required for complete installation Fits: Model LC407131 , Lippert tandem axle lift kit
13" Long x 5/8" diameter steel shaft for 12" rollers replaces a worn-out roller shaft on your boat trailer. Includes 2 cap nuts for mounting.Features: Roller shaft accommodates a roller on your boat trailer Constructed of sturdy, zinc-plated steel Attaches with 2 end cap nuts (included) Made in the USA Specs: Application: 12" rollers Quantity: 1 shaft and 2 cap nuts Shaft length: 13" Diameter: 5/8"
11" Long x 5/8" diameter steel shaft for 10" rollers replaces a worn-out roller shaft on your boat trailer. Includes 2 cap nuts for mounting.Features: Roller shaft accommodates a roller on your boat trailer Constructed of sturdy, zinc-plated steel Attaches with 2 end cap nuts (included) Made in the USA Specs: Application: 10" rollers Quantity: 1 shaft and 2 cap nuts Shaft length: 11" Diameter: 5/8"
19" Long x 5/8" diameter steel shaft for 18" rollers replaces a worn-out roller shaft on your boat trailer. Includes 2 pal nuts for mounting.Features: Roller shaft accommodates a roller on your boat trailer Constructed of sturdy, zinc-plated steel Attaches with 2 end cap nuts (included) Made in the USA Specs: Application: 18" rollers Quantity: 1 shaft and 2 pal nuts Shaft length: 19" Diameter: 5/8"
8-7/8" Long x 5/8" diameter steel shaft for 8" rollers replaces a worn-out roller shaft on your boat trailer. Includes 2 cap nuts for mounting.Features: Roller shaft accommodates a roller on your boat trailer Constructed of sturdy, zinc-plated steel Attaches with 2 end cap nuts (included) Made in the USA Specs: Application: 8" rollers Quantity: 1 shaft and 2 cap nuts Shaft length: 8-7/8" Diameter: 5/8"
12-3/4" Long x 1/2" diameter steel shaft for 10" rollers replaces a worn-out roller shaft on your boat trailer. Includes 2 cap nuts for mounting.Features: Roller shaft accommodates a roller on your boat trailer Constructed of sturdy, zinc-plated steel Attaches with 2 end cap nuts (included) Made in the USA Specs: Application: 10" rollers Quantity: 1 shaft and 2 cap nuts Shaft length: 12-3/4" Diameter: 1/2"
6-1/4" Long x 5/8" diameter steel shaft for 5" rollers replaces a worn-out roller shaft on your boat trailer. Includes 2 cap nuts for mounting.Features: Roller shaft accommodates a roller on your boat trailer Constructed of sturdy, zinc-plated steel Attaches with 2 end cap nuts (included) Made in the USA Specs: Application: 5" rollers Quantity: 1 shaft and 2 cap nuts Shaft length: 6-1/4" Diameter: 5/8"
6-1/4" Long x 1/2" diameter steel shaft for 5" rollers replaces a worn-out roller shaft on your boat trailer. Includes 2 cap nuts for mounting.Features: Roller shaft accommodates a roller on your boat trailer Constructed of sturdy, zinc-plated steel Attaches with 2 end cap nuts (included) Made in the USA Specs: Application: 5" rollers Quantity: 1 shaft and 2 cap nuts Shaft length: 6-1/4" Diameter: 1/2"
5-1/4" Long x 5/8" diameter steel shaft for 4" rollers replaces a worn-out roller shaft on your boat trailer. Includes 2 cap nuts for mounting.Features: Roller shaft accommodates a roller on your boat trailer Constructed of sturdy, zinc-plated steel Attaches with 2 end cap nuts (included) Made in the USA Specs: Application: 4" rollers Quantity: 1 shaft and 2 cap nuts Shaft length: 5-1/4" Diameter: 5/8"
This 6-11/16" long x 3-1/16" wide U-bolt works with a U-bolt plate and another U-bolt to help secure your 5,200-lb, 6,000-lb, or 7,000-lb round trailer axle to its leaf springs. Galvanized steel is durable and corrosion resistant.Features: Replacement U-bolt acts as part of a trailer suspension system Used with another U-bolt (sold separately) and a U-bolt plate to secure one side of your axle to a leaf spring, which is mounted to your trailer's frame Round bolt fits round trailer axles Galvanized steel resists rust and corrosion Great for use on boat or snowmobile trailers Nuts and washers included Made in the USA Specs: Quantity: 1 U-bolt Application: 3" diameter axles Inner width: 3-1/16" Length: 6-11/16" Bolt size: 1/2"-13 Galvanized Steel Galvanized steel parts are hot-dipped in zinc after being stamped.
5-1/4" Long x 1/2" diameter steel shaft for 4" rollers replaces a worn-out roller shaft on your boat trailer. Includes 2 cap nuts for mounting.Features: Roller shaft accommodates a roller on your boat trailer Constructed of sturdy, zinc-plated steel Attaches with 2 end cap nuts (included) Made in the USA Specs: Application: 4" rollers Quantity: 1 shaft and 2 cap nuts Shaft length: 5-1/4" Diameter: 1/2"
This 5-3/8" long x 2-3/8" wide U-bolt works with a U-bolt plate and another U-bolt to help secure your 3,500-lb round trailer axle to its leaf springs. Galvanized steel is durable and corrosion resistant.Features: Replacement U-bolt acts as part of a trailer suspension system Used with another U-bolt (sold separately) and a U-bolt plate to secure one side of your axle to a leaf spring, which is mounted to your trailer's frame Round bolt fits round trailer axles Galvanized steel resists rust and corrosion Great for use on boat or snowmobile trailers Nuts and washers included Made in the USA Specs: Quantity: 1 U-bolt Application: 2-3/8" diameter axles Inner width: 2-3/8" Length: 5-3/8" Bolt size: 1/2"-13 Galvanized Steel Galvanized steel parts are hot-dipped in zinc after being stamped.
This 4-13/16" long x 1-3/4" wide U-bolt works with a U-bolt plate and another U-bolt to help secure your 2,000-lb round trailer axle to its leaf springs. Galvanized steel is durable and corrosion resistant.Features: Replacement U-bolt acts as part of a trailer suspension system Used with another U-bolt (sold separately) and a U-bolt plate to secure one side of your axle to a leaf spring, which is mounted to your trailer's frame Round bolt fits round trailer axles Galvanized steel resists rust and corrosion Great for use on boat or snowmobile trailers Nuts and washers included Made in the USA Specs: Quantity: 1 U-bolt Application: 1-3/4" diameter axles Inner width: 1-3/4" Length: 4-13/16" Bolt size: 3/8"-16 Galvanized Steel Galvanized steel parts are hot-dipped in zinc after being stamped.
This 7" long U-bolt works with a U-bolt plate and another U-bolt to help secure your 5,200-lb, 6,000-lb, or 7,000-lb round trailer axle to its leaf springs. Bolt is 7" long and has an inner width of 3". 2 Nuts included.Features: Replacement U-bolt acts as part of a trailer suspension system Used with another U-bolt (sold separately) and a U-bolt plate to secure one side of your axle to a leaf spring, which is mounted to your trailer's frame Round bolt fits round trailer axles 1 U-bolt and 2 nuts included Specs: Application: 3" diameter axles Inner width: 3" Length: 7" Bolt size: 1/2"-20
This U-bolt, in conjunction with a U-bolt plate and an additional U-bolt, attaches your round, 10,000-lb Hayes axle to your leaf springs. Bolt is 9-1/2" long and has an inner width of 5".Features: Used with U-bolt plate to secure axle to leaf springs, which are mounted to the trailer frame Attaches with a U-bolt plate (sold separately) and an additional U-bolt with same dimensions (sold separately) Fits 10,000-lb, round Hayes trailer axles with 5" diameter Includes 2 nuts Specs: Bolt diameter: 5/8" Length: 9-1/2" Width: 5"
This U-bolt, in conjunction with a U-bolt plate and an additional U-bolt, attaches your 5,200-lb, 6,000-lb or 7,000-lb, round axle to your leaf springs. Bolt is 7-1/4" long and has an inner width of 3".Features: Used with U-bolt plate to secure axle to leaf springs, which are mounted to the trailer frame Attaches with a U-bolt plate (sold separately) and an additional U-bolt with same dimensions (sold separately) Fits 5,200-lb, 6,000-lb and 7,000-lb, round trailer axles with 3" diameter Includes 2 nuts Specs: Bolt diameter: 9/16" Length: 7-1/4" Width: 3"
This 5-1/2" long U-bolt works with a U-bolt plate and another U-bolt to help secure your 3,500-lb round trailer axle to its leaf springs. Bolt has an inner width of 2-3/8". 2 Nuts included.Features: Replacement U-bolt acts as part of a trailer suspension system Used with another U-bolt (sold separately) and a U-bolt plate to secure one side of your axle to a leaf spring, which is mounted to your trailer's frame Round bolt fits round trailer axles 1 U-bolt and 2 nuts included Specs: Application: 2-3/8" diameter axles Inner width: 2-3/8" Length: 5-1/2" Bolt size: 1/2"-20
Filters
