etrailer Rust-Resistant 4-Leaf Double Eye Spring for 4K Trailer Axles Spec Review Video

You could potentially replace your leaf springs with a larger capacity spring but will need to match the length of your current leaf springs to avoid having to remove and reinstall the hangers and rest of the suspension system, which is a giant…

If you can get me the overall length of your slipper springs and the axle capacity of your trailer I can help you pick out the correct replacement.

I can help you determine the right replacement double-eye leaf springs for your Keystone Hideout, though we don't have any way of knowing what specific ones you need. It's pretty easy though, as all you need to do is measure your current leaf…

Hey Rob! Both the 25-1/4" long item #DX95CR and item #e44SR springs will work if you're replacing a 25-1/4" long leaf spring. They're close enough in capacity so long as you're not using too light of a spring with the 4,400 lbs…

To replace your 25-1/4" leaf springs on your Ranger RT188 boat trailer I recommend the 3-Leaf Double-Eye Spring item #e93SR. These have a 4,000 lbs capacity and three leafs. They will work great on your trailer. There are a few ways to gain…

Slipper Springs like #e33SR do not use a bolt and bushing for the open eye end of the spring. It connects directly to the hanger using a slipper spring hanger kit.

What is the length of your current springs? Also what is the wheelbase distance between your trailer axles? With that info I can see what components you'd need.

Thanks for the picture! I have something close to your 26" slipper springs. It is possible to switch to a two eye leaf spring or even go down to a four leaf spring with a higher capacity. If you wanted to switch it up to a two eye leaf spring I…

For a single axle trailer, you want the shackle strap to be able to move so that you have the spring deflection needed for your suspension. Angled like the photo or even almost vertical is fine you just don't want the shackle strap to bind and…

In order to switch from slipper to double eye springs you'll need new hangers which are going to dictate your height so if you're looking to maintain the same height, you'd want to choose new hangers which are the same height as your…

Here is what you need for a rust-resistant U-bolt kit and shackle bolts to go with the 4-Leaf Double-Eye Spring #e48SR: - CE Smith U-Bolt Kit for Mounting 3,500-lb, Round Trailer Axles - 5-1/2" Long U-Bolts - Zinc #CE23002 - Zinc Shackle Bolt…

Since leaf springs flatten out as they wear, the best way to determine their actual center eye to center eye length is to put the trailer up on jack stands so the axle(s) hang freely, then measure them. This being said, there's every chance that…