... Waterproof trailer tail light serves 6 functions: brake, tail, turn, reflex, side marker, and license plate light. Durable polycarbonate lens and housing. Surface mount to trailer. 3-Prong molded plug.The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board.
... Waterproof trailer tail light serves 5 functions: brake, tail, turn, rear reflex, and side marker. Durable polycarbonate lens and housing. Surface mount to trailer. 3-Prong molded plugThe housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board.
16" x 1-5/16" x 11/16". Low-profile LED trailer tail light serves as a stop, turn, and tail light for trailers over 80" wide. Surface mount - hardware not included. 3-Wire design.The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board.
7-9/16" x 3-5/16" Oval. 3-Function, waterproof LED light acts as brake, tail, and turn signal. Durable polycarbonate housing and lens. Surface mount with built-in flange - hardware not included. 3-Wire design.The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board.
Quality LED lighting from trailers and trucks to marine and emergency gear. Easily installed, rugged and lifetime guaranteed for demanding use.Features: Powered by 11 LEDs Hermetic seal for dust and waterproofing Durable impact resistant lens Exceeds FMVSS 108 standards Can be mounted at any angle Specs: Measurements: 15-1/2" long; 1-1/4" tall, 1/2" deep LEDs: 11 Color: Clear Voltage: 9 to 14 volts DC Mounting: Surface mounted using (2) screws (screw caps included) Connector: 9" pigtail Lifetime warranty TecNiq's Stop Tail Turn Light is a quality waterproof lamp that can be mounted in unique locations where space is at a premium.
... Waterproof, LED trailer light serves as either a side marker light or clearance light when properly mounted. Durable polycarbonate lens and housing. Stud mount to trailer. Single wire design. P2 rated.The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board.
... Low-profile LED tail light serves 3 funtions on trailers over 80" wide. Durable polycarbonate housing and lens. Surface mount - hardware not included. 3-Wire design.The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board.
18-1/4" x 5-3/4" Rectangle. LED dome light provides bright light in extreme temperatures. Motion sensor activates light when motion detected. Durable polycarbonate housing. Surface mount. 2-Wire design with 16" leads. 8 Diodes.It does not include the light's drive method or the amount of light lost from the lens or reflector. Effective lumens take these factors into account and represent the number of lumens that are actually produced by the complete light assembly, not just the amount of light that the diodes are capable of producing.
10-1/8" x 3-1/16" Oval. 4-Function, waterproof light acts as brake, tail, turn, and backup light. Red lens set inside clear lens. Mounts to trailer surface with built-in flange - hardware not included. 4-Wire pigtail. 14 Diodes.The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board.
11" x 8" Rectangle. Weatherproof trailer light serves 4 functions: stop, turn, tail, and backup light. Built-in reflector between lights. Surface mount with grommet - hardware not included. 5-Wire pigtail.Features: Rectangular trailer light serves 4 functions Stop light Tail light Turn signal light Backup light - eliminates the need to cut holes in your trailer for 2 lights Built-in reflector provides increased light output for added safety Weatherproof housing and lens protect against water damage LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate lens and housing Red lens with red LEDs for tail light Clear lens with white LEDs for backup light Mounts on surface of trailer - hardware not included 5-Wire pigtail DOT approved Specs: Quantity: 1 combination trailer tail light Dimensions: 11" long x 8" tall x 1-1/4" deep Diodes: 76 1-Year warranty Surface-Mount Light Surface-mount lights install flat against the surface of the trailer, so a hole does not need to be cut into the trailer for the light.
... Waterproof light serves 4 functions: brake, tail, turn, and backup light. Red lens is set inside of clear lens. Mounts on surface of trailer with built-in flange - hardware not included. 4-Wire pigtail. 16 Diodes.The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board.
This waterproof identification light bar with 3 lights is 15-15/16" long and designed for trailers wider than 80". Durable polycarbonate housing and lens. Surface mounts to trailer - hardware not included. 2-Wire design. DOT approved.The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board.
... Compact LED trailer light illuminates your license plate. Great White series features custom-cut lens optics and ultra-bright white diode. Surface mount to trailer with included bracket. 2-Wire design.Features: Compact LED light illuminates your trailer's license plate Great White series features custom-cut lens optics and ultra-bright white diode for increased light output LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable black housing Clear lens over white LED Compatible with 12V DC systems Surface mount to trailer with built-in license plate bracket - hardware not included 2-Wire design includes power lead and ground wire DOT compliant Made in the USA Specs: Dimensions: 8-5/8" long x 3-1/4" tall x 1-15/16" deep Distance between mounting holes (center on center): 3-1/2" Diodes: 1 10-Year limited warranty Surface-Mount Light Surface-mount trailer lights install using a flange or bracket with mounting holes.
6-1/16" x 3-5/8" Rectangle. Waterproof trailer light acts as brake, tail, turn, side marker, side reflex reflector, and rear reflex reflector. Mounts on surface of trailer - hardware included. 3-Wire pigtail. 18 LEDs.Features: Rectangular trailer tail light serves 6 functions Stop light Tail light Turn signal light Side marker light Side reflex reflector Rear reflex reflector Sealed, waterproof construction is submersible Light is designed specifically for boat trailers LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate housing Red acrylic lens over white LEDs Mounts on surface of trailer - hardware included Stainless steel hardware slides along rear channels so that you can adjust the position of the light 3-Wire pigtail DOT compliant P2 rated Specs: Configuration: passenger's side (right-hand side) Driver's-side light (STL57RB) sold separately Dimensions: 6-1/16" long x 3-5/8" tall x 2-1/4" deep Distance between mounting slots (center to center): 2" Hardware size: 1/4-20 x 1" long Diodes: 18 Power draw at 12.8 volts: Stop/turn signal light: 0.268 amps Side marker light: 0.059 amps Lifetime warranty on LEDs Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
... Waterproof 3-function LED trailer tail light acts as a brake, tail, and turn signal. Durable polycarbonate housing and lens. Surface mount with built-in flange - hardware not included. 3-Wire design.The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board.
... Waterproof, LED trailer light functions as both a clearance and side marker light when properly mounted. Durable polycarbonate base and lens. Recessed mount with included grommet. 2-Wire pigtail. PC rated.The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board.
20-1/2" x 1-1/16" x 3/4". Waterproof trailer light serves 3 functions on trailers over 80" wide: brake, tail, and turn. Low-profile ThinLine light fits in tight spaces. Surface mount - hardware not included. 3-Wire design.The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board.
... Triple trailer light provides stop, turn signal, tail, and backup light functions. Durable polycarbonate base and lens. Mounts on surface of trailer - hardware not included. Pre-wired design.Features: Triple LED trailer light provides stop, turn, tail, and backup light function LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide better light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate base and lens Red and clear lens over white LEDs Compatible with 12V DC systems Mounts on surface of trailer - hardware not included Wire functions: Red: stop and turn White: ground Black: tail lights Purple: reverse or backup DOT and SAE compliant Meets FMVSS 108 requirements for automotive lighting Assembled in the USA Specs: Overall dimensions: 14" long x 6-7/8" tall x 1" deep Quantity: 1 1-Year limited warranty
13-5/8" x 12-1/4" Rectangle. LED utility light illuminates an exterior area with bright white light. Durable aluminum construction with silver powder coat resists corrosion. Mounts flush to exterior trailer wall.Features: Low-profile, rectangle LED lamp delivers bright, focused light to illuminate wide areas Flush-mount design delivers a sleek, unobtrusive look LEDs make great replacements for incandescent lights Lasts 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Rustproof aluminum construction Silver powder coat finish resists corrosion Clear lens with white LEDs Compatible with 120V AC systems Made in the USA Specs: Overall dimensions: 13-5/8" long x 12-1/4" tall x 1-7/8" thick Light dimensions: 9-1/2" long x 7-3/8" tall Required cutout dimensions: 10-3/8" wide x 9" tall Light output: 4,500 lumens Diodes: 19 Power draw at 110V AC: 0.5 amps 1-Year limited warranty
Rectangle LED trailer light with 20 diodes provides stop, turn, tail, and backup light functions. Surface mounts to trailer. 4-Wire pigtail.Features: Rectangular LED trailer light works as a stop, turn, tail, and reverse light functions LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide better light with less power output No bulbs to replace - no brittle filaments Red and clear lens with white LEDs Compatible with 12V DC systems Mounts on surface of trailer - hardware not included 4-Wire design DOT compliant Specs: Dimensions: 9-5/8" long x 7" tall x 5/8" deep Diodes: 20 Wire length: 7" Weight: 0.95 lbs 1-Year limited warranty
... Waterproof, LED trailer light functions as both a clearance and side marker light when properly mounted. Durable polycarbonate base and lens. Recessed mount with included grommet. 2-Wire pigtail. PC rated.The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board.
9-1/2" x 4" Oval. LED Trailer tail light with 22 diodes provides stop, turn, tail, rear reflex, and license plate light functions. Durable polycarbonate base. Surface mounts to driver side of trailer with included bracket. 3-Wire design.Features: Oval LED trailer light works as a stop, turn, tail, and license plate light for driver side applications Includes rear reflex reflector and license plate mounting bracket LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide better light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate base with acrylic lens Red lens with white LEDs Compatible with 12V DC systems Mounts on surface of trailer with built-in license plate bracket - no cutout required 3-Wire design White wire is the ground Brown wire is for the tail lights Red wire is for the stop and turn lights DOT and SAE compliant Meets FMVSS 108 requirements for automotive lighting Assembled in the USA Specs: Configuration: driver's side (left hand) Passenger side: 328-003-85 (sold separately) Dimensions: 9-1/2" long x 4" tall x 1-3/16" deep Diodes: 22 Wire length: 7" 1-Year limited warranty Surface-Mount Light Surface-mount trailer lights install using a flange or bracket with mounting holes.
2" Diameter waterproof LED utility light adds bright white light to an interior area. Miro-Flex design provides increased light output with a contemporary design. Flush mount with grommet (sold separately). Accepts standard 2-prong plug.The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board.
2-7/8" x 2-1/8" Square. LED trailer light functions as a clearance or side marker light when properly mounted. Built-in reflex reflector. Durable ABS housing with black base. Surface mount - hardware not included. 2-Wire design. P2 rated.Features: LED trailer light functions as a clearance light or side marker light when properly mounted Built-in reflex reflector removes the need for a separate reflector LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable ABS housing and acrylic lens Amber lens over white LEDs Compatible with 12V DC systems Stud mount to trailer - stud and nut included 2-Wire design includes power lead and ground wire DOT compliant P2 rated Specs: Dimensions: 2-7/8" long x 2-1/8" tall x 15/16" deep Diodes: 6 Power draw at 12.8V: 0.054 amps Lifetime warranty on LEDs P2-Rated Lights A P2-rated light produces a 45-degree angle of light to either side of its centerline for a total of 90 degrees of coverage.
Filters
