Minimize chassis movement in your fifth-wheel RV with this jack stabilizer kit. Attach the telescoping tubes to your jacks and position them in place to brace your trailer frame. Includes 4 stabilizers for use at front of camper and 2 for the rear.Features: Helps to stabilize your 5th-wheel RV and eliminate unwanted chassis movement Stabilizer bars form triangles at front and rear jacks to prevent shaking and swaying Installs easily on 5th-wheel campers Bolts onto C-channel, I-beam or H-beam trailer frames - no welding required Attaches to traditional stabilizer jacks, scissor jacks, and/or landing gear - adapters for electric and hydraulic jacks sold separately Telescopes for perfect fit Locks securely in place with simple twist of T-handle Bolt-on installation - no welding required One end of each stabilizer tube attaches to each landing gear leg and the other end attaches to the RV frame Includes: 6 Stabilizer outer tubes 6 Stabilizer inner tubes 2 Clevis brackets 6 Stiffening pads 4 Spacer mounts 6 T-bolts 4 Flanged bushings 30 Nuts 48 Washers 18 Hex cap screws 10 Swing bolts 2 Silver bullet lifting handles 2 Hex nuts 8 Hex washer heads 1 Warning sticker for jacks Application: 5th-wheel trailers with 58" or more between front landing gear legs 1-Year warranty
Minimize chassis movement in your fifth-wheel RV with this jack stabilizer kit. Attach the telescoping tubes to your jacks and position them in place to brace your trailer frame. Includes 4 stabilizers for use at front of camper and 2 for the rear.Features: Helps to stabilize your 5th-wheel RV and eliminate unwanted chassis movement Stabilizer bars form triangles at front and rear jacks to prevent shaking and swaying Installs easily on 5th-wheel campers Bolts onto C-channel, I-beam or H-beam trailer frames - no welding required Attaches to traditional stabilizer jacks, scissor jacks, and/or landing gear - adapters for electric and hydraulic jacks sold separately Telescopes for perfect fit Locks securely in place with simple twist of T-handle Bolt-on installation - no welding required One end of each stabilizer tube attaches to each landing gear leg and the other end attaches to the RV frame Includes: 6 Stabilizer outer tubes 6 Stabilizer inner tubes 2 Clevis brackets 6 Stiffening pads 4 Spacer mounts 6 T-bolts 4 Flanged bushings 30 Nuts 48 Washers 18 Hex cap screws 10 Swing bolts 2 Silver bullet lifting handles 2 Hex nuts 8 Hex washer heads 1 Warning sticker for jacks Application: 5th-wheel trailers with less than 58" between front landing gear legs 1-Year warranty Specs: Telescoping tube: Retracted length: (2) 24" and (2) 27" Extended length: (2) 44" and (2) 47" 1-Year limited warranty
Pull the side-facing plunger pins on these heavy-duty jacks to release the drop legs for an extra 8" of lift. Retracted height is 8-1/4" and extended height is 18". Get maximum lifting power in low gear and fast cranking in high gear.Do not use landing gear to lift your trailer or RV during tire changes or service work because doing so will exceed the capacity of the landing legs.
Electric, fifth-wheel landing gear set's motor has an IP-rated switch for fast, easy, and safe operation. Each leg is 33-1/2" tall, offers 19-7/8" of travel, and has a 15" drop leg for extra lift. ... Do not use landing gear to lift your trailer or RV during tire changes or service work because doing so will exceed the capacity of the landing legs.
Electric, fifth-wheel landing gear set's motor has an IP-rated switch for fast, easy, and safe operation. Each leg is 29-1/2" tall, offers 19-7/8" of travel, and has a 15" drop leg for extra lift. ... Do not use landing gear to lift your trailer or RV during tire changes or service work because doing so will exceed the capacity of the landing legs.
Manual landing gear lets you jack up your fifth-wheel trailer quickly and easily. Each leg is 29-1/2" tall, offers 19-7/8" of travel, and has a 15" drop leg for extra lift. ... Convenience is a hallmark of this landing gear from Stromberg Carlson. An inner drop leg on each jack makes leveling easy by allowing the jack feet to reach the ground quickly and at varying heights.
Electric, fifth-wheel landing gear set's motor has an IP-rated switch for fast, easy, and safe operation. Each leg is 29-1/2" tall, offers 19-7/8" of travel, and has a 15" drop leg for extra lift. ... Do not use landing gear to lift your trailer or RV during tire changes or service work because doing so will exceed the capacity of the landing legs.
Electric, fifth-wheel landing gear set's motor has an IP-rated switch for fast, easy, and safe operation. Each leg is 33-1/2" tall, offers 19-7/8" of travel, and has a 15" drop leg for extra lift. ... Do not use landing gear to lift your trailer or RV during tire changes or service work because doing so will exceed the capacity of the landing legs.
Designed to level and stabilize your trailer or RV, each of these jacks provide simple, effective leveling. Manual crank can be switched out for a motor (LG-142178 - sold separately). Retracted height is 32-3/4". ... Do not use landing gear to lift your trailer or RV during tire changes or service work because doing so will exceed the capacity of the landing legs.
Specially designed to level and stabilize your trailer or RV, each of these jacks provide simple, effective leveling. Manual crank (RVLG-HDL) and motor (LC142178) sold separately. Retracted height is 32-3/4". ... Do not use landing gear to lift your trailer or RV during tire changes or service work because doing so will exceed the capacity of the landing legs.
Having two motors gives you more leveling control when setting up camp on uneven ground. 74" Bracket height when extended. 3 Universal mount weld stops let you choose how to orient the new legs. Total lift includes 17" of drop leg travel.If you are replacing Lippert or Reese landing gear, you will need use the included weld-on hangers for installation. Do not use landing gear to lift your trailer or RV during tire changes or service work, because doing so will exceed the capacity of the landing gear.
Give your 5th-wheel trailer or camper some new legs! 19-1/2" inside to inside between weld stops. Includes manual crank and 1 motor, with room to add a 2nd one (sold separately).How to Determine the Support Capacity You Need in Your Landing Gear Landing gear stabilizes about 25% of your trailer's total weight when it's loaded with cargo. For example, a 14,000-lb trailer has a pin weight of about 3,500 lbs.
Give your 5th-wheel trailer or camper some new legs! 19-1/2" inside to inside between weld stops. Includes manual crank and 1 motor, with room to add a 2nd one (sold separately).How to Determine the Support Capacity You Need in Your Landing Gear Landing gear stabilizes about 25% of your trailer's total weight when it's loaded with cargo. For example, a 14,000-lb trailer has a pin weight of about 3,500 lbs.
Replaces the lead jack from your Stromberg Carlson landing gear set (LG-1, LG-3, or LG-183708). Lead leg has mounting location for crank or motor and connects to the follow jack with a cross shaft (not included).Features: Replaces the lead jack for your tandem landing gear Designed for use with Stromberg Carlson models LG-1, LG-3, and LG-183708 Can be used with most landing gear sets, including Atwood, Venture, and Lippert models Provides a mounting point for the hand crank or motor (sold separately) Connects to the follow jack in your landing gear set with a connecting rod, or cross shaft (not included) Constructed of heavy-duty steel Includes drop leg and cage pin Made in the USA Specs: Total lift: 34-7/8" Travel: 19-7/8" Drop leg: 15" Overall dimensions: 32-3/4" tall x 2-1/2" wide Leg length: 29-1/2" Weight capacity: 4,000 lbs Distance between weld stops: Inside to inside: 15-1/2" Outside to outside: 17-1/2" Width of weld stops: 1"
Replaces the short, heavy-duty landing gear jack leg on your Lippert Ground Control 2.0.Features: Replaces the short, heavy-duty landing gear jack leg on your Lippert Ground Control 2.0 Quantity: 1 short jack leg
Replaces the follow jack from your Stromberg Carlson landing gear. Designed for use with models LG-1, LG-3, and LG-183708. Follow leg connects to the lead jack in your landing gear set with a cross shaft (not included).Features: Replaces the follow jack for your tandem landing gear Designed for use with Stromberg Carlson models LG-1, LG-3, and LG-183708 Can be used with most landing gear sets, including Atwood, Venture, and Lippert models Connects to the lead jack in your landing gear set with a connecting rod, or cross shaft (not included) Constructed of heavy-duty steel Includes drop leg and cage pin Made in the USA Specs: Total lift: 34-7/8" Travel: 19-7/8" Drop leg: 15" Overall dimensions: 32-3/4" tall x 2-1/2" wide Leg length: 29-1/2" Weight capacity: 4,000 lbs
Replaces the motor in your landing gear legs for your RV or fifth-wheel or Lippert Components stabilizer jacks (LC298707, LC337199, or LC369774).Features: Replaces the motor in your landing gear legs for your RV or fifth-wheel or Lippert Components stabilizer jacks (LC298707, LC337199, or LC369774) Quantity: 1 replacement motor
Replaces the extended, heavy-duty landing gear jack leg on your Lippert Ground Control 2.0.Features: Replaces the extended, heavy-duty landing gear jack leg on your Lippert Ground Control 2.0 Quantity: 1 extended jack leg
Instead of spending money on a replacement follow jack for your landing gear, fix your broken jack with this repair kit. The follow jack doesn't have a crank or motor mounted to it, and it connects to the lead jack with a cross shaft.Features: Includes the gears and pins required for repairing the follow jack in your landing gear Follow jack is the jack in the landing gear that doesn't have a crank or motor mounted to it Designed for use with Stromberg Carlson LG-1 or LG-183708 landing gear Specs: Shaft dimensions: 4" long x 1/2" diameter Small gear dimensions: 1-1/2" diameter x 12 teeth Large gear dimensions: 1-3/4" diameter x 16 teeth
Instead of spending money on a replacement lead jack for your landing gear, fix your broken jack with this repair kit. The lead jack has a mounting location for a crank or motor, and it connects to the follow jack with a cross shaft.Features: Includes the gears and pins required for repairing the lead jack in your landing gear Lead jack is the jack in the landing gear that the hand crank or motor mounts to Designed for use with Lippert Components Venture LG-1 or LG-183708 landing gear 1-Year warranty
Mount this extra-large footpad on your stabilizing jack to help prevent sinking and achieve a more stable setup. Solid steel construction supports up to 6,000 lbs.Features: Extra-large footplate helps to prevent sinking Replaces existing jack foot Greater surface area than standard footpads provides increased stability Perfect for most stabilizer jacks and landing gear used on 5th-wheel trailers and RVs Durable, 7-gauge steel construction Reinforced edges will not bend Specs: Dimensions: 8" long x 5-3/4" wide Weight capacity: 6,000 lbs Lifetime warranty
Mount this extra-large footpad on your stabilizing jack to help prevent sinking and achieve a more stable setup. Threaded attachment point lets you fine-tune height. Supports up to 6,000 lbs.Features: Extra-large footplate helps to prevent sinking Replaces existing jack foot Greater surface area than standard footpads provides increased stability Adjustable design allows you to fine-tune height Threaded bolt lets you raise or lower foot to achieve perfect height Great for leveling Perfect for most stabilizer jacks and landing gear used on 5th-wheel trailers and RVs Durable, 7-gauge steel construction Reinforced edges will not bend Specs: Dimensions: 8" long x 5-3/4" wide Weight capacity: 6,000 lbs Lifetime warranty
Replaces the connecting rod and allows you to operate the lead leg and follow leg of your etrailer or Ram 50,000-lb landing gear set (STLG-5003321, STLG-5003312, TJD2SPDSET-50100) at the same time.Features: Replaces the connecting rod on your etrailer or Ram 50,000-lb, 2-speed landing gear jacks (STLG-5003321, STLG-5003312, TJD2SPDSET-50100)
Give your 5th-wheel trailer or camper some new legs! Upgraded motor works nearly twice as fast as the standard 80 RPM base model. Outer tubes are 29-1/2" long with 15-1/2" between weld stops. Total lift includes 16" of drop leg.As long as these measurements match the legs you're replacing, you should be able to swap out your current landing gear for this set, even it's from a different brand. How to Determine the Weight Capacity You Need in Landing Gear Landing gear stabilizes about 25% of your trailer's total weight when it's loaded with cargo.
Filters
