Use this electric tongue jack to lift your trailer with the flip of a switch. The sturdy steel jack can handle up to 5,000 lbs. It has 18" of travel and a 5" drop leg for extra lift. LED lights on both sides boost visibility at night.Features: Electric jack with 12V motor lets you lift and lower your A-frame trailer quickly and easily Top-mounted toggle switches are easily accessible Large LED side lights make it simple to set up your camper at night Also ease weight distribution hookup and disconnect Bubble level on top of housing helps you level your trailer Bull's-eye design shows front to back and side to side Drop leg allows for greater adjustability Rust-resistant powder coated steel parts are strong and durable Housing is made of vacuum-formed plastic for protection from the elements Black cover is painted to resist fading Round, zinc-plated steel footplate provides stability Emergency crank (included) allows you to manually operate jack if needed Easy bolt-on installation for A-frame trailers 3 Star washers included for making a good ground from jack to trailer Mounting hardware sold separately Specs: Bracket height: 9-1/2" Retracted 27-1/2" Extended Total lift: 23" Travel: 18" Drop leg: 5" Lift capacity: 5,000 lbs Outer tube diameter: 2-3/16" Inner tube diameter: 1-15/16" Footplate diameter: 5-1/2" Power wire: 10 gauge Motor draws 30 amps under load 2-Year warranty How to Determine the Lift Capacity You Need in a Jack A trailer jack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball.
Use this electric tongue jack to lift your trailer with the flip of a switch. The sturdy steel jack can handle up to 4,500 lbs. It has 18" of travel and a 5" drop leg for extra lift. LED lights on both sides boost visibility at night.
Replaces the extend/retract switch for your Stromberg Carlson electric tongue jack.Features: Replaces the extend/retract switch for the Stromberg Carlson electric A-frame tongue jack Works with 2500 lb jack (JET-2500) Works with 3500 lb jacks (JET-3555 and JET-3755) Works with 5000 lb jack (JET-5000) Fits: Stromberg Carlson 2500 lb electric tongue jack: JET-2500 Stromberg Carlson 3500 lb electric tongue jack: JET-3555 and JET-3755 Stromberg Carlson 5000 lb electric tongue jack: JET-5000
Replaces the switch boots for your Stromberg Carlson electric tongue jack.Features: Replaces the switch boots for the Stromberg Carlson electric A-frame tongue jack Works with 2500 lb jack (JET-2500) Works with 3500 lb jacks (JET-3555 and JET-3755) Works with 5000 lb jack (JET-5000) Fits: Stromberg Carlson 2500 lb electric tongue jack: JET-2500 Stromberg Carlson 3500 lb electric tongue jack: JET-3555 and JET-3755 Stromberg Carlson 5000 lb electric tongue jack: JET-5000
Replaces the white screw-on cap with level for your Stromberg Carlson electric tongue jack.Features: Replaces the white screw-on cap with level for your Stromberg Carlson electric A-frame tongue jack Works with 2500 lb jack (JET-2500) Works with 3500 lb jacks (JET-3555 and JET-3755) Works with 5000 lb jack (JET-5000) Fits: Stromberg Carlson 2500 lb electric tongue jack: JET-2500 Stromberg Carlson 3500 lb electric tongue jack: JET-3555 and JET-3755 Stromberg Carlson 5000 lb electric tongue jack: JET-5000
Replaces the light on/off switch for your Stromberg Carlson electric tongue jack.Features: Replaces the light on/off switch for the Stromberg Carlson electric A-frame tongue jack Works with 2500 lb jack (JET-2500) Works with 3500 lb jacks (JET-3555 and JET-3755) Works with 5000 lb jack (JET-5000) Fits: Stromberg Carlson 2500 lb electric tongue jack: JET-2500 Stromberg Carlson 3500 lb electric tongue jack: JET-3555 and JET-3755 Stromberg Carlson 5000 lb electric tongue jack: JET-5000
Replaces the crank handle for your Stromberg Carlson electric trailer jack (JET-2500, JET-3555, JET-3755, or JET-5000). Allows you to manually crank your jack in case there is no electricity available.Specs: Socket size: 7/16" Features: Replaces the crank handle on your Stromberg Carlson electric A-frame tongue jack Fits the following models: JET-2500, JET-3555, JET-3755, or JET-5000
Perfect for campers, RV travelers, and anyone using a trailer, these jacks make life easier and more enjoyable. They're designed with comfort and convenience in mind, helping you save time and energy for what matters most - your journey.Power Connection: Wires directly to 12-volt power source Automatic Reset, No Hassle: The 20A automatic reset relay fuse protects the jacks motor from overloads or short circuits and resets itself automatically, no need for spares or replacements Nighttime Convenience: LED courtesy light on front of jack makes nighttime setup simple Protective Cover: Canvas cover shields your jack from the suns harmful rays and harsh weather Emergency Backup: Manual crank included for peace of mind when needed Moisture Protection: Rubber cover over the crank opening keeps out moisture and the elements Durable Finish: Tough black powder coat finish resists rust and corrosion Specs: Lift: 18" Lift capacity: 5,000 lbs Dimensions: Overall height: 29-1/2" Mounting plate height: 8-7/8" Footplate diameter: 5-1/2" Outer tube diameter: 2-1/4" Motor voltage: 12 volts 2-Year warranty
Black powder coated A-frame jack has a retracted height of 8-3/8" and an extended height of 24". The external gearbox is easily accessible, and the zinc-finished sidewind handle arm provides a sleek look.Features: Utility jack lets you raise and lower your A-frame trailer Sidewind handle has zinc finish for attractive look and rust resistance Black powder coat finish resists corrosion External gearbox is easily accessible Effortless greasing with built-in grease zerk Footplate or caster sold separately Specs: Bracket height (from bottom of inner tube to bottom of bracket): 8-3/8" Retracted 24" Extended Travel: 15-5/8" Clearance: 15" from bottom of bracket to top of jack Outer tube diameter: 2-1/4" Inner tube diameter: 2" Handle radius: 8" Lift capacity: 3,000 lbs Support capacity: 5,000 lbs 1-Year warranty
These compact, user-friendly scissor jacks are a must-have to keep your RV level and stable. They adjust from 5" to 29". Bow-tie bases steady the jacks on soft surfaces. Manual crank handle and drill bit included for flexible operation.
These leveling scissor jacks with a 5,000-lb combined capacity will keep your RV level and stable. They adjust from 5" to 23-3/4" as your application requires. The bow-tie base steadies the jack on soft surfaces. ... Features: Scissor jacks help to level and stabilize 5th-wheel, travel, horse and cargo trailers Bow-tie bases keep the jacks steady, even on soft surfaces 8-Hole top plates allow for adjustability when mounting Bearing set on crank side extends jack life Black powder coat finish resists corrosion Handle included Specs: Height: Collapsed: 5" Extended: 23-3/4" Lift: 18-3/4" Length: 24-7/8" when fully collapsed 26" Long including nut Mounting base: 10" long x 3-1/4" wide Mounting holes: 5/8" long x 3/8" wide Round holes: 5/16" diameter Lift capacity: 5,000 lbs 2,500 lbs per jack Quantity: 2 jacks Note: This jack set is designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer.
Weld-on jack has a retracted height of 24-5/8" and an extended height of 39-7/8". The square design provides superior side-load support. Drop leg offers 13-1/2" of lift on top of 15-1/4" of screw travel. Includes sidewind handle.Features: Utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Square jack provides more side-load capacity than round-tube jacks Sidewind handle has zinc finish for attractive look and rust resistance Drop leg allows for increased lift and saves time when raising or lowering Pin and clip holds leg at desired location Effortless greasing with built-in grease zerk Black powder coated outer tube and zinc finished inner tube and footplate for corrosion resistance Welded-on footplate minimizes sinking in soft ground Weld-on installation Specs: Height (from bottom of foot to top of jack): 24-5/8" Retracted 39-7/8" Extended Total lift: 28-3/4" Screw travel: 15-1/4" Drop leg travel: 13-1/2" Lift capacity: 5,000 Outer tube width: 2-1/4" Inner tube width: 2" Footplate dimensions: 7" long x 4" wide Handle radius: 7-3/4" Adjustment hole spacing on drop leg: 3-3/8" from center of hole to center of hole 3-1/2" Between center of hole 2nd from the top and center of nearest hole 1-Year warranty
Quickly and easily stabilize your unhitched gooseneck trailer with this heavy-duty steel tripod. Adjustable-height ball makes setup a snap.Features: Tripod holds your parked gooseneck trailer steady at the coupler Also works with 5th-wheel trailers that use the Andersen Ultimate Connection system Helps to eliminate front-to-back and side-to-side motion of unhitched trailer or RV Threaded support at base of hitch ball lets you fine-tune height adjustment Turn the handle counterclockwise to raise ball, clockwise to lower it Collapsible design Handles fold down once desired height is reached Tripod folds up for storage Large footplates help to prevent sinking and tilting Heavy-duty steel construction Specs: Support capacity: 5,000 lbs Height: 31" - 54" Footplate dimensions: 5" wide x 5-1/2" long Weight: 24 lbs Limited lifetime warranty After unhitching your gooseneck trailer, steady it with the Ultra-Fab tripod stabilizer.
Give your 5th-wheel trailer or camper some new legs! 19-1/2" inside to inside between weld stops. Includes manual crank and 1 motor, with room to add a 2nd one (sold separately).Features: Replacement landing gear kit for a manual or battery-powered setup Gearbox works with single- and dual-motor configurations Components can replace most Atwood and Venture parts Connecting cross shaft extends to fit your application Electric motor is an upgrade from manual methods Allows the lead and follow legs to work together at a faster rate Drop leg reduces time spent cranking, adjusting, or holding buttons Upgrading to plunger pins (LG-119113 - sold separately) would eliminate fiddling with cage pins Toggle switch will be right at home with your "current" electrical setup Fuse-protected wires - won't interfere with your camper's electrical IP-rated - can be mounted safely near propane tanks Excellent stability and support Large, rectangular footplates minimize sinking in soft ground Durable, sturdy steel construction Corrosion-resistant black powder coat finish Bolt-on installation - uses your existing mounting brackets Weld stops are located on the side facing toward your trailer frame - outside mount Hardware and additional mounting brackets are included if you need them Specs: Weight capacity: Single motor: 2,500-lbs per leg Dual motor: 5,000-lbs per leg Total lift: 34-3/4" Screw travel : 19-3/4" Drop leg travel : 15" Overall outer tube length: 33-1/2" Outer tube width: 2-1/2" Distance between weldstops: Inside to inside: 19-1/2" Outside to outside: 21-1/2" Rate of travel: 2-1/2" per minute Extendable cross shaft: Minimum: 41" Maximum: 72-3/4" 360 Watt DC motor Volts: 12 Amps: 30 Note: The distance between weld stops should match up with the mounting brackets already on your trailer frame.
Features: Can be welded or bolted to standard A-frame couplers Powder coated black finish 5,000 lb A-frame jack Removable wheel or foot sold separately Made in the USA Specs: Capacity: 5,000 lbs Bracket height: 10-1/4" Retracted 24-1/4" Extended Lift: 14" Retracted overall height without handle: 20-1/2" Inner tubing diameter: 2" Outer tubing diameter: 2-1/4" 3-Year limited warranty How to Determine the Lift Capacity You Need in a Jack A trailer jack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball.
This leveling scissor jack with a 5,000-lb capacity will keep your RV level and stable. It adjusts from 5" to 30" inches as your situation requires, and the bow-tie base steadies the jack on soft surfaces.Features: Raises, lowers and stabilizes camper Remains steady on soft surfaces because of wide bow-tie base Bolts or welds on Includes 1 steel jack Requires crank handle (sold separately - JCH-1) Specs: Capacity: 5,000 lbs Extended height: 30" Retracted (collapsed) height: 4" Collapsed length: 32-1/2" 1-Year limited warranty Note: These jacks are designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer.
These leveling scissor jacks with a 5,000-lb combined capacity will keep your RV level and stable. They adjust from 5" to 23-3/4" as your application requires. Includes SnapJack feet for improved stability and grip on uneven terrain.Features: Scissor jacks help level and stabilize your 5th-wheel, travel, horse, or cargo trailer Large metal feet come with pre-installed SnapPads Thicker and stronger than standard bow-tie feet Improved stability and grip on uneven terrain Added height on the SnapJack feet prevents the stabilizers from being over-extended 8-Hole top plates allow for greater adjustability during installation Includes manual crank handle and hardware to install SnapJack feet to stabilizers Added height on the SnapJack feet prevents the stabilizers from being over-extended Specs: Height: Collapsed: 5" Extended: 23-3/4" Lift: 18-3/4" Length: 24-7/8" when fully collapsed 26" Long including nut Mounting base: 10" long x 3-1/4" wide Mounting holes: 5/8" long x 3/8" wide Round holes: 5/16" diameter Support capacity: 5,000 lbs 2,500 lbs per jack Quantity: 2 jacks SnapJack Quantity: 2 Dimensions: 8-1/8" wide x 2-3/4" tall Weight: 3.8 lbs each Note: This jack set is designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer.
24-1/4" x 3-1/2" Rectangular, surface-mount scene light with 297 LEDs produces a bright white light to illuminate a wide area. 30 Degree downward facing light projection is perfect for areas beside trailers, work trucks, and more.Features: Rectangular, LED scene light emits a powerful white light for agricultural and marine applications 30 Degree downward tilt is perfect for lighting up areas beside your toy hauler or work truck Heavy-duty aluminum resists moisture and corrosion LEDs are energy efficient, long-lasting, and vibration resistant Rated for up to 50,000 hours of operation Surface mount unit installs with 4 screws (not included) Hardwires to your application 12V compatible Specs: Overall dimensions: 24-1/4" wide x 3-1/2" tall x 1-5/8" thick Light output: 5,000 lumens Diodes: 297 Input voltage: 9V - 14V DC Power draw at 12V: 3.4 amps Wire length: 9" Limited lifetime warranty
This leveling scissor jack with a 5,000-lb capacity will help keep your trailer or RV level and stable. It adjusts from 4-1/4" up to 24" as your application requires. ... Features: Scissor jack helps to level and stabilize 5th-wheel, travel, horse, and cargo trailers Bow-tie base keeps the jack steady, even on soft surfaces Heavy-gauge steel construction ensures durability and strength Black powder coat finish provides protection from rust and corrosion Easy bolt-on installation with included hardware Crank handle sold separately Specs: Height: Collapsed: 4-1/4" Extended: 24" Lift: 24" Collapsed length: 26-3/16" Mounting base dimensions: 10-1/4" long x 3-1/4" wide Large bolt hole dimensions: 11/16" long x 7/16" wide Small bolt hole diameter: 5/16" Load capacity: 5,000 lbs Maximum capacity at 22" extension: 6,500 lbs Quantity: 1 jack 90-Day warranty Note: This jack is designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer.
Quickly and easily stabilize your unhitched fifth-wheel trailer with this sturdy steel tripod. Adjustable hitch cup makes setup a snap.Features: Tripod holds your parked 5th-wheel trailer steady at the king pin Helps to eliminate front-to-back and side-to-side motion of unhitched trailer or RV Threaded hitch cup allows for easy height adjustment Turn the handle counterclockwise to raise cup, clockwise to lower it Holes in hitch cup provide a space for a padlock (sold separately) to prevent removal of king pin Collapsible design Tripod folds up for storage Extension legs (UF19-950002 - sold separately) available for applications requiring additional height Large footplates help to prevent sinking and tilting Heavy-duty steel construction Specs: Support capacity: 5,000 lbs Height: 31" - 54" Footplate dimensions: 5" wide x 5-1/2" long King pin cup measures 3-1/4" across and 4-1/2" deep Fits king pins up to 3-1/4" diameter Weight: 29 lbs Lifetime warranty After unhitching your fifth-wheel trailer or RV, steady it with the Ultra-Fab tripod stabilizer.
This leveling scissor jack with a 5,000-lb capacity will help keep your trailer or RV level and stable. It adjusts from 4-1/4" up to 30" as your application requires. ... Features: Scissor jack helps to level and stabilize 5th-wheel, travel, horse, and cargo trailers Bow-tie base keeps the jack steady, even on soft surfaces Heavy-gauge steel construction ensures durability and strength Black powder coat finish provides protection from rust and corrosion Specs: Height: Collapsed: 4-1/4" Extended: 30" Lift: 30" Collapsed length: 32-1/2" Mounting base diameter: 9" Bolt hole diameter: 3/8" Load capacity: 5,000 lbs Quantity: 1 jack 90-Day warranty Note: This jack is designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer.
... This remote-controlled light fixes that. With 360-degree rotation and 5,000 lumens, you can aim it exactly where you want without climbing up or stopping your work.Highlights Aim Light Exactly Where You Need It: Remote control rotates the light 360 degrees without climbing or repositioning. Light Up the Whole Work Area: 5,000 lumens gives you clear visibility for jobs, loading, and service work. Sealed Against Water and Dust: IP68-rated housing keeps moisture and debris out of the internals.
Give your 5th-wheel trailer or camper some new legs! 19-1/2" inside to inside between weld stops. Includes manual crank and 1 motor, with room to add a 2nd one (sold separately).Features: Replacement landing gear kit for a manual or battery-powered setup Gearbox works with single- and dual-motor configurations Components can replace most Atwood and Venture parts Connecting cross shaft extends to fit your application Electric motor is an upgrade from manual methods Allows the lead and follow legs to work together at a faster rate Drop leg reduces time spent cranking, adjusting, or holding buttons Upgrading to plunger pins (LG-119113 - sold separately) would eliminate fiddling with cage pins Toggle switch will be right at home with your "current" electrical setup Fuse-protected wires - won't interfere with your camper's electrical IP-rated - can be mounted safely near propane tanks Excellent stability and support Large, rectangular footplates minimize sinking in soft ground Durable, sturdy steel construction Corrosion-resistant black powder coat finish Bolt-on installation - uses your existing mounting brackets Weld stops are facing the opposite leg - inside mount Hardware and additional mounting brackets are included if you need them Specs: Weight capacity: Single motor: 2,500-lbs per leg Dual motor: 5,000-lbs per leg Total lift: 34-3/4" Screw travel : 19-3/4" Drop leg travel : 15" Overall outer tube length: 33-1/2" Outer tube width: 2-1/2" Distance between weldstops: Inside to inside: 19-1/2" Outside to outside: 21-1/2" Extendable cross shaft: Minimum: 41" Maximum: 72-3/4" 360 Watt DC motor Volts: 12 Amps: 30 Note: The distance between weld stops should match up with the mounting brackets already on your trailer frame.
Filters
