Weld-on, pipe-mount swiveljack pivots up for travel. Square design provides solid side-load support. Retracted height is 14-1/2". Extended height is 29-1/2". ... Features: Utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Tubular swivel design lets you twist jack up for storage, down for use Pull pin with clip holds jack in place Lanyard connects pin to jack so it won't get lost Square jack provides more side-load capacity than round-tube jacks Belly band welded to the outer tube provides extra strength Sidewind handle has zinc finish for attractive look and rust resistance Drop leg allows for increased lift and saves time when raising or lowering Black painted outer tube Zinc finished inner tube and footplate for corrosion resistance Welded-on footplate minimizes sinking in soft ground Effortless greasing with built-in grease zerk Weld-on installation with included female pipe mount Specs: Jack height (from bottom of foot to center of pipe mount): 14-1/2" Retracted 29-1/2" Extended Lift: 15" Drop leg adjustment: 13-1/2" Total adjustment: 28-1/2" Lift capacity: 7,000 lbs Support capacity: 8,000 lbs Outer tube width: 2-1/2" Inner tube width: 2-1/4" Footplate dimensions: 8" long x 6" wide Pipe mount diameter: Inner: 2" Outer: 2-1/2" Handle radius: 8-1/8" Adjustment hole spacing on drop leg: 3-3/8" from center of hole to center of hole 1-Year warranty
Your arm stalls mid-crank trying to lift a loaded boat trailer at the ramp. Been there. This 1,500 lb aluminum swiveljack accepts a 3/4" socket so a drill does the lifting. The wheel rolls the trailer into place and holds up to saltwater use.Swivels Up for Travel: Pivot the jack alongside the trailer frame so it stays clear of the road. Better Suited for Marine Use: Aluminum construction and stainless steel hardware resist corrosion around the water.
Get more traction and stability on uneven ground than with 1-wheeled jacks. Dual wheelbase swivels 360 degrees for maximum maneuverability. Marine-grade zinc resists rust and corrosion.In fact, a jack with a higher capacity should operate more efficiently, allowing you to spend less time cranking and more time fishing.
With a jack on each side of your trailer, it's easy to get it up off the ground for routine maintenance or a roadside emergency. The bolt-on mounting plates give you a lot of freedom to place the jacks where you want them, with no welding.Here's what we love about this kit: 2 Jacks. Place one on each side of your trailer and get it up off the ground 2 Bolt-on mounting plates. No welding! Put them where you want them Includes bolts and hardware Swivel design.
Included weld-on pipe mount lets you pivot the jack up for travel and down for use. Retracted height is 14-1/2". Extended height is 29-7/8". The drop leg adds 13-1/2" of manual adjustment to 15-3/8" of lift.Features: Utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Tubular swivel design lets you twist jack up for storage, down for use Pull pin with clip holds jack in place Lanyard connects pin to jack so it won't get lost Square jack provides more side-load capacity than round-tube jacks Topwind handle has red claw grip for comfortable, easy cranking Easily folds away for storage Drop leg allows for increased lift and saves time when raising or lowering Black painted outer tube Zinc finished inner tube and footplate for corrosion resistance Welded-on footplate minimizes sinking in soft ground Effortless greasing with built-in grease zerk Weld-on installation with included female pipe mount Specs: Jack height (from bottom of foot to center of pipe mount): 14-1/2" Retracted 29-7/8" Extended Lift: 15-3/8" Drop leg adjustment: 13-1/2" Total adjustment: 28-7/8" Lift capacity: 7,000 lbs Support capacity: 8,000 lbs Outer tube width: 2-1/2" Inner tube width: 2-1/4" Footplate dimensions: 7-7/8" long x 5-7/8" wide Pipe mount diameter: Inner: 2" Outer: 2-1/2" Handle radius: 9-1/4" Adjustment hole spacing on drop leg: 3-3/8" from center of hole to center of hole 1-Year warranty
This swiveljack pivots up for travel and down for use. Retracted height is 16". Extended height is 31-1/4". Weld-on pipe mount included.Features: Utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Tubular swivel design lets you twist jack up for storage, down for use Pull pin with clip holds jack in place Lanyard connects pin to jack so it won't get lost Topwind handle has red claw grip for comfortable, easy cranking Corrosion-resistant finishes Outer tube has durable black powder coat Inner tube and footplate have rust-resistant clear zinc finish Welded-on footplate minimizes sinking in soft ground Weld-on installation with included male pipe mount Specs: Bracket height (from bottom of foot to center of pipe mount): 16" Retracted 31-1/4" Extended Lift: 15-1/4" Outer tube diameter: 2-1/4" Inner tube diameter: 2" Footplate dimensions: 8" long x 6" wide Pipe mount diameter: Inner: 2" Outer: 2-1/2" Handle radius: 9-3/4" Lift capacity: 7,000 lbs Support capacity: 8,000 lbs 1-Year warranty
Swing-up boat trailer jack is perfect for your small boat or jet ski trailer. 6" Caster swivels 360 degrees to make it easy to maneuver your trailer. Clear zinc finish fights rust and corrosion.In fact, a jack with a higher capacity should operate more efficiently, allowing you to spend less time cranking and more time fishing.
Swing-up boat trailer jack is perfect for your small boat or jet ski trailer. 6" Caster swivels 360 degrees to make it easy to maneuver your trailer. Clear zinc finish fights rust and corrosion.In fact, a jack with a higher capacity should operate more efficiently, allowing you to spend less time cranking and more time fishing.
Swing-up boat trailer jack is perfect for your small boat or jet ski trailer. 8" Caster swivels 360 degrees to make it easy to maneuver your trailer. Clear zinc finish fights rust and corrosion.In fact, a jack with a higher capacity should operate more efficiently, allowing you to spend less time cranking and more time fishing.
This swiveljack pivots up for travel and down for use. Built-in grease zerk allows for simple greasing. Retracted height is 10-1/4". Extended height is 20-1/4". ... Features: Utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Tubular swivel design lets you twist jack up for storage, down for use Pull pin with clip holds jack in place Lanyard connects pin to jack so it won't get lost Sidewind handle has zinc finish for attractive look and rust resistance Corrosion-resistant finishes Outer tube has durable black powder coat Inner tube and footplate have rust-resistant clear zinc finish Welded-on footplate minimizes sinking in soft ground Effortless greasing with built-in grease zerk Weld-on installation with included male pipe mount Specs: Bracket height (from bottom of foot to center of pipe mount): 10-1/4" Retracted 20-1/4" Extended Lift: 10" Outer tube diameter: 2-1/4" Inner tube diameter: 2" Footplate dimensions: 7" long x 4" wide Pipe mount diameter: Inner: 2" Outer: 2-1/2" Handle radius: 8-1/8" Lift capacity: 3,000 lbs Support capacity: 5,000 lbs 1-Year warranty
Round jack has a retracted height of 15-1/2" and an extended height of 30". The deep-seated retaining ring provides extra side-load support, and the spring-loaded pull pin allows you to swivel the jack up for travel and down for use.Features: Utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Retaining-ring swivel design lets you swing jack up for storage, down for use Deep-seated ring ensures extra side-load support Convenient 1/2", spring-loaded pull pin secures and releases jack Sidewind handle has zinc finish for attractive look and rust resistance Outer tube has corrosion-resistant black powder coat Inner tube and footplate have durable, rust-resistant, clear zinc finish Welded-on footplate minimizes sinking in soft ground Effortless greasing with built-in grease zerk Weld-on mounting bracket included Specs: Bracket height (from bottom of foot to center of mounting plate): 15-1/2" Retracted 30" Extended Lift: 14-1/2" Outer tube diameter: 2-1/4" Inner tube diameter: 2" Footplate dimensions: 7-1/2" long x 3-7/8" wide Mounting bracket dimensions: 5" long x 4-1/4" wide Handle radius: 6-1/4" Lift capacity: 2,000 lbs Support capacity: 3,000 lbs 1-Year warranty
We designed this pair so that you can get a swiveljack on your trailer without having to weld it on. The mounting plate bolts on, giving you a lot of freedom to put the jack where you want it.Features: Raises and lowers your trailer Pivots down for use, up for storage, and pins in place Pin tethered to jack so it won't get lost Extends with sidewind handle Zinc finish resists rust - and looks good! Stabilizes with footplate to keep it from sinking in soft ground Maintains easily with built-in grease zerk Bolts on with mounting plate Resists corrosion with quality finishes Outer tube has durable black powder coat Inner tube and footplate have rust-resistant clear zinc finish Mounting plate with matte black powder and e-coat Specs: Bracket height (from bottom of foot to center of pipe mount): 10-1/4" Retracted 20-1/4" Extended Lift: 10" Outer tube diameter: 2-1/4" Inner tube diameter: 2" Footplate dimensions: 7" long x 4" wide Pipe mount diameter: Inner: 2" Outer: 2-1/2" Handle radius: 8-1/8" Capacity: Lift: 3,000 lbs Support: 5,000 lbs Mounting plate: 3,500 lbs Mount dimensions: Outer diameter: 2" Pin hole diameter: 5/8" Length from plate: 2-1/2" Fits trailer frames with a cross section depth of 3" or less Plate dimensions: 5" wide x 4-1/4" tall x 2" deep Warranty: Jack: 1-Year warranty Mounting plate: limited lifetime warranty
Rust-resistant jack has a retracted height of 16" and an extended height of 31-1/4". The deep-seated retaining ring provides extra side-load support, and the spring-loaded pull pin lets you swivel the jack up for travel and down for use.Features: Utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Retaining-ring swivel design lets you swing jack up for storage, down for use Deep-seated ring ensures extra side-load support Convenient 1/2", spring-loaded pull pin secures and releases jack Topwind handle has red claw grip for comfortable, easy cranking Easily folds away for storage Outer tube has corrosion-resistant black powder coat Corrosion-resistant clear zinc finish for durability Welded-on footplate minimizes sinking in soft ground Effortless greasing with built-in grease zerk Weld-on mounting bracket included Specs: Bracket height (from bottom of foot to center of mounting plate): 16" Retracted 31-1/4" Extended Lift: 15-1/4" Outer tube diameter: 2-1/4" Inner tube diameter: 2" Footplate dimensions: 7-1/2" long x 3-3/4" wide Mounting bracket dimensions: 5" long x 4-1/4" wide Handle radius: 7-1/2" Lift capacity: 2,000 lbs Support capacity: 3,000 lbs 1-Year warranty
With a jack on each side of your trailer, it's easy to get it up off the ground for routine maintenance or a roadside emergency. The bolt-on mounting plates give you a lot of freedom to place the jacks where you want them, with no welding.Here's what we love about this kit: 2 Jacks. Place one on each side of your trailer and get it up off the ground 2 Bolt-on mounting plates. No welding! Put them where you want them Includes bolts and hardware Swivel design.
Rust-resistant jack has a retracted height of 11" and an extended height of 21-1/2". The deep-seated retaining ring provides extra side-load support, and the spring-loaded pull pin lets you swivel the jack up for travel and down for use.Features: Utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Retaining-ring swivel design lets you swing jack up for storage, down for use Deep-seated ring ensures extra side-load support Convenient 1/2", spring-loaded pull pin secures and releases jack Topwind handle has claw grip for comfortable, easy cranking Easily folds away for storage Corrosion-resistant finishes Outer tube has durable black powder coat Inner tube and footplate have rust-resistant clear zinc finish Welded-on footplate minimizes sinking in soft ground Effortless greasing with built-in grease zerk Bolt-on mounting bracket included Specs: Application: trailer frames with a height from 2" to 4" No more than 3" wide Bracket height Retracted: 11" Extended: 21-1/2" Lift: 10-1/2" Outer tube diameter: 2-1/4" Inner tube diameter: 2" Footplate dimensions: 7-1/2" long x 3-3/4" wide Handle radius: 7-3/4" Lift capacity: 2,000 lbs 1-Year warranty
This fixed-leg, swiveljack pivots up for travel and down for use. Square design provides superior side-load support. Jack has a retracted height of 15-3/4" and an extended height of 31". ... Features: Utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Tubular swivel design lets you twist jack up for storage, down for use Pull pin with clip holds jack in place Lanyard connects pin to jack so it won't get lost Square jack provides more side-load capacity than round-tube jacks Sidewind handle has zinc finish for attractive look and rust resistance Black painted outer tube Zinc finished inner tube and footplate for corrosion resistance Welded-on footplate minimizes sinking in soft ground Effortless greasing with built-in grease zerk Weld-on installation Pipe mount (included) is required for installation Specs: Bracket height (from bottom of foot to center of pipe mount): 15-3/4" Retracted 31" Extended Lift: 15-1/4" Clearance: 8-1/2" from center of pipe mount to top of jack Outer tube width: 2-1/4" Inner tube width: 2" Footplate dimensions: 7" long x 4" wide Pipe mount diameter: Inner: 2" Outer: 2-1/2" Pipe mount pin hole diameter: 5/8" Handle radius: 8-1/2" Lift capacity: 3,000 lbs Support capacity: 5,000 lbs 1-Year warranty
Your arm stalls mid-crank with a loaded tongue. Been there. This swivel bolt jack lifts up to 2,000 lbs and accepts a 3/4" socket so a drill can do the work. It pivots up for clearance, and hitching doesn't drag on.Swivels Up for Travel: Pivot the jack alongside the trailer frame so it stays out of the way on the road. Holds Up to Outdoor Use: E-coat, powder coat, and zinc plating help protect the steel from corrosion.
This swiveljack pivots up for travel and down for use. Built-in grease zerk allows for simple greasing. Retracted height is 10-1/4". Extended height is 20-7/8". ... Features: Utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Tubular swivel design lets you twist jack up for storage, down for use Pull pin with clip holds jack in place Lanyard connects pin to jack so it won't get lost Topwind handle has red claw grip for comfortable, easy cranking Corrosion-resistant finishes Outer tube has durable black powder coat Inner tube and footplate have rust-resistant clear zinc finish Welded-on footplate minimizes sinking in soft ground Effortless greasing with built-in grease zerk Weld-on installation with included male pipe mount Specs: Bracket height (from bottom of foot to center of pipe mount): 11-1/2" Retracted 21-1/2" Extended Lift: 10" Outer tube diameter: 2-1/4" Inner tube diameter: 2" Footplate dimensions: 8" long x 6" wide Pipe mount diameter: Inner: 2" Outer: 2-1/2" Handle radius: 8-1/2" Lift capacity: 7,000 lbs Support capacity: 8,000 lbs 1-Year warranty
This swiveljack pivots up for travel and down for use. Built-in grease zerk allows for simple greasing. Retracted height is 15-5/8". Extended height is 31-1/8". ... Features: Utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Tubular swivel design lets you twist jack up for storage, down for use Pull pin with clip holds jack in place Lanyard connects pin to jack so it won't get lost Sidewind handle has zinc finish for attractive look and rust resistance Corrosion-resistant finishes Outer tube has durable black powder coat Inner tube and footplate have rust-resistant clear zinc finish Welded-on footplate minimizes sinking in soft ground Effortless greasing with built-in grease zerk Weld-on installation with included male pipe mount Specs: Bracket height (from bottom of foot to center of pipe mount): 15-5/8" Retracted 31-1/8" Extended Lift: 15-1/2" Outer tube diameter: 2-1/4" Inner tube diameter: 2" Footplate dimensions: 7-1/2" long x 3-3/4" wide Pipe mount diameter: Inner: 2" Outer: 2-1/4" Handle radius: 8" Lift capacity: 3,000 lbs Support capacity: 5,000 lbs 1-Year warranty
This swiveljack pivots up for travel and down for use. Built-in grease zerk allows for simple greasing. Retracted height is 11". Extended height is 21-3/4". ... Features: Utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Tubular swivel design lets you twist jack up for storage, down for use Pull pin with clip holds jack in place Lanyard connects pin to jack so it won't get lost Topwind handle has red claw grip for comfortable, easy cranking Corrosion-resistant finishes Outer tube has durable black powder coat Inner tube and footplate have rust-resistant clear zinc finish Welded-on footplate minimizes sinking in soft ground Effortless greasing with built-in grease zerk Weld-on installation with included male pipe mount Specs: Bracket height (from bottom of foot to center of pipe mount): 11" Retracted 21-3/4" Extended Lift: 10-3/4" Outer tube diameter: 2-1/4" Inner tube diameter: 2" Footplate dimensions: 7" long x 4" wide Pipe mount diameter: Inner: 2" Outer: 2-1/2" Handle radius: 7" Lift capacity: 2,000 lbs Support capacity: 3,000 lbs 1-Year warranty
This swiveljack pivots up for travel and down for use. Rust-resistant zinc finish makes it great for marine use. Built-in grease zerk allows for simple greasing. ... Features: Utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Tubular swivel design lets you twist jack up for storage, down for use Pull pin with clip holds jack in place Lanyard connects pin to jack so it won't get lost Topwind handle has red claw grip for comfortable, easy cranking Corrosion-resistant clear zinc finish for durability Welded-on footplate minimizes sinking in soft ground Effortless greasing with built-in grease zerk Weld-on installation with included male pipe mount Specs: Bracket height (from bottom of foot to center of pipe mount): 16" Retracted 31" Extended Lift: 15" Outer tube diameter: 2-1/4" Inner tube diameter: 2" Footplate dimensions: 7-1/2" long x 3-3/4" wide Pipe mount diameter: Inner: 2" Outer: 2-1/2" Handle radius: 7-1/2" Lift capacity: 3,000 lbs Support capacity: 5,000 lbs 1-Year warranty
Swiveljack pivots up for travel and down for use. Rust-resistant zinc finish makes it great for marine use. Built-in grease zerk allows for simple greasing. ... Features: Utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Tubular swivel design lets you twist jack up for storage, down for use Pull pin with clip holds jack in place Lanyard connects pin to jack so it won't get lost Topwind handle has red claw grip for comfortable, easy cranking Corrosion-resistant clear zinc finish for durability Welded-on footplate minimizes sinking in soft ground Effortless greasing with built-in grease zerk Weld-on installation with included male pipe mount Specs: Bracket height (from bottom of foot to center of pipe mount): 11" Retracted 21-3/4" Extended Lift: 10-3/4" Outer tube diameter: 2-1/4" Inner tube diameter: 2" Footplate dimensions: 7-1/4" long x 4" wide Pipe mount diameter: Inner: 2" Outer: 2-1/2" Pin size: 9/16" Handle radius: 7-1/2" Lift capacity: 3,000 lbs Support capacity: 5,000 lbs 1-Year warranty
We designed this pair so that you can get a swiveljack on your trailer without having to weld it on. The mounting plate bolts on, giving you a lot of freedom to put the jack where you want it.Features: Raises and lowers your trailer Pivots down for use, up for storage, and pins in place Pin tethered to jack so it won't get lost Extends with sidewind handle Zinc finish resists rust - and looks good! Stabilizes with footplate to keep it from sinking in soft ground Maintains easily with built-in grease zerk Bolts on with mounting plate Resists corrosion with quality finishes Outer tube has durable black powder coat Inner tube and footplate have rust-resistant clear zinc finish Mounting plate with matte black powder and e-coat Specs: Bracket height (from bottom of foot to center of pipe mount): 15-5/8" Retracted 31-1/8" Extended Lift: 15-1/2" Outer tube diameter: 2-1/4" Inner tube diameter: 2" Footplate dimensions: 7-1/2" long x 3-3/4" wide Pipe mount diameter: Inner: 2" Outer: 2-1/2" Handle radius: 8" Capacity: Lift: 3,000 lbs Support: 5,000 lbs Mounting plate: 3,500 lbs Mount dimensions: Outer diameter: 2" Pin hole diameter: 5/8" Length from plate: 2-1/2" Fits trailer frames with a cross section depth of 3" or less Plate dimensions: 5" wide x 4-1/4" tall x 2" deep Warranty: Jack: 1-Year warranty Mounting plate: limited lifetime warranty
This fixed-leg, swiveljack pivots up for travel and down for use. Square design provides superior side-load support. Jack has a retracted height of 14-7/8" and an extended height of 30-3/8". ... Features: Utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Tubular swivel design lets you twist jack up for storage, down for use Pull pin with clip holds jack in place Lanyard connects pin to jack so it won't get lost Square jack provides more side-load capacity than round-tube jacks Topwind handle has red claw grip for comfortable, easy cranking Easily folds away for storage Black painted outer tube Zinc finished inner tube and footplate for corrosion resistance Welded-on footplate minimizes sinking in soft ground Effortless greasing with built-in grease zerk Weld-on installation Specs: Bracket height (from bottom of foot to center of pipe mount): 14-7/8" Retracted 30-3/8" Extended Lift: 15-1/2" Outer tube width: 2-1/4" Inner tube width: 2" Footplate dimensions: 7" long x 4" wide Pipe mount diameter: Inner: 2" Outer: 2-1/2" Handle radius: 9-1/2" Lift capacity: 3,000 lbs Support capacity: 5,000 lbs 1-Year warranty
Filters
