Replaces the crankhandle on your etrailer or Ram scissor jacks (TJSCHD-24). Handle allows you to manually crank the jacks.Features: Replaces the crankhandle on your etrailer or Ram 5,000-lb scissor stabilizer jack set (TJSCHD-24) Crankhandle allows you to manually crank your jacks
Replaces the crankhandle on your etrailer scissor jacks (e56VV and e96VV). Handle allows you to manually crank the jacks.Features: Replaces the crankhandle on your etrailer 2,500-lb and 7,500-lb scissor stabilizer jacks (e56VV and e96VV) Crankhandle allows you to manually crank your jacks
Replaces the crankhandle for your Stromberg Carlson electric trailer jack (JET-2500, JET-3555, JET-3755, or JET-5000). Allows you to manually crank your jack in case there is no electricity available.Specs: Socket size: 7/16" Features: Replaces the crankhandle on your Stromberg Carlson electric A-frame tongue jack Fits the following models: JET-2500, JET-3555, JET-3755, or JET-5000
This crankhandle will help you raise and lower your Stromberg Carlson scissor jack according to your needs.Features: Helps you raise and lower your Stromberg Carlson scissor jack according to your needs Works with Stromberg Carlson scissor jacks Made in the USA Specs: Overall length: 25-1/2" 1-Year limited warranty
Replace the crankhandle that came with your Lippert Components manual scissor jack with this new one. Crankhandle assists in lowering and raising your scissor jack on your RV or trailer.Features: Manual crankhandles can become easily lost at the campsite. Order your replacement crankhandle here! Standard Lippert Components manual scissor jackcrankhandle Can also be used with Lippert power tongue jacks in the event of a power failure 3/4" Hex socket 90-Day warranty
Pull the front-facing plunger pin on this heavy-duty jack to release the drop leg for an extra 13-1/2" of lift. The durable jack screw offers increased strength. Get maximum lifting power in low gear and fast cranking in high gear.For these legs to work, you'd need a set of landing gear with a combined lift capacity of no less than 12,500 lbs. If you only have one jack that can get the job done, that's great! In fact, this should work more efficiently, allowing you to spend less time cranking.
Pull the side-facing plunger pin on this heavy-duty jack to release the drop leg. The durable jack screw offers increased strength- lifts up to 5 tons, and supports 6. Sidewind crank included.For these legs to work, you'd need a set of landing gear with a combined lift capacity of no less than 12,500 lbs. If you only have one jack that can get the job done, that's great! In fact, this should work more efficiently, allowing you to spend less time cranking.
... Manual crankhandle and drill bit included for flexible operation.Features: Scissor jacks help to level and stabilize 5th-wheel, travel, horse and cargo trailers Bow-tie bases keep the jacks steady, even on soft surfaces 6-Hole top plates allow for adjustability when mounting Bearing set on crank side extends jack life Manual handle lets you operate the jacks by hand Drill bit attachment socket lets you operate the jacks with a power drill Black e-coated finish is corrosion resistant Zinc-plated screws and hardware are built to last Specs: Lift: 24" Support capacity (each): 2,500 lbs Quantity: 2 jacks Limited lifetime warranty
... Manual crankhandle and drill bit included for flexible operation.Features: Scissor jacks help to level and stabilize 5th-wheel, travel, horse and cargo trailers Bow-tie bases keep the jacks steady, even on soft surfaces 6-Hole top plates allow for adjustability when mounting Bearing set on crank side extends jack life Manual handle lets you operate the jacks by hand Drill bit attachment socket lets you operate the jacks with a power drill Black e-coated finish is corrosion resistant Zinc-plated screws and hardware are built to last Specs: Lift: 24" Support capacity (each): 7,500 lbs Quantity: 2 jacks Limited lifetime warranty
... Manual crankhandle and drill bit included for flexible operation.Features: Scissor jacks help to level and stabilize 5th-wheel, travel, horse and cargo trailers Bow-tie bases keep the jacks steady, even on soft surfaces 6-Hole top plates allows for adjustability when mounting Bearing set on crank side extends jack life Manual handle lets you operate the jacks by hand Drill bit attachment socket lets you operate the jacks with a power drill Black powder coated finish is corrosion resistant Zinc-plated screws and hardware are built to last Specs: Lift: 24" Support capacity (each): 7,500 lbs Quantity: 4 jacks Limited lifetime warranty
... The bow-tie bases steady the jacks on soft surfaces. Handle included.Features: Scissor jacks help to level and stabilize 5th-wheel, travel, horse and cargo trailers Bow-tie bases keep the jacks steady, even on soft surfaces 8-Hole top plates allow for adjustability when mounting Bearing set on crank side extends jack life Black powder coat finish resists corrosion Handle included Specs: Height: Collapsed: 5" Extended: 23-3/4" Lift: 18-3/4" Length: 24-7/8" when fully collapsed 26" Long including nut Mounting base: 10" long x 3-1/4" wide Mounting holes: 5/8" long x 3/8" wide Round holes: 5/16" diameter Lift capacity: 10,000 lbs 2,500 lbs per jack Quantity: 4 jacks Note: This jack set is designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer.
... The bow-tie base steadies the jack on soft surfaces. Includes handle.Features: Scissor jacks help to level and stabilize 5th-wheel, travel, horse and cargo trailers Bow-tie bases keep the jacks steady, even on soft surfaces 8-Hole top plates allow for adjustability when mounting Bearing set on crank side extends jack life Black powder coat finish resists corrosion Handle included Specs: Height: Collapsed: 5" Extended: 23-3/4" Lift: 18-3/4" Length: 24-7/8" when fully collapsed 26" Long including nut Mounting base: 10" long x 3-1/4" wide Mounting holes: 5/8" long x 3/8" wide Round holes: 5/16" diameter Lift capacity: 5,000 lbs 2,500 lbs per jack Quantity: 2 jacks Note: This jack set is designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer.
... Manual crankhandle and drill bit included for flexible operation.Features: Scissor jacks help to level and stabilize 5th-wheel, travel, horse and cargo trailers Bow-tie bases keep the jacks steady, even on soft surfaces 6-Hole top plates allows for adjustability when mounting Bearing set on crank side extends jack life Manual handle lets you operate the jacks by hand Drill bit attachment socket lets you operate the jacks with a power drill Black e-coated finish is corrosion resistant Zinc-plated screws and hardware are built to last Specs: Lift: 24" Support capacity (each): 2,500 lbs Quantity: 4 jacks Limited lifetime warranty
Replaces the 21" handle on your etrailer or Ram landing gear (STLG-5003321) and allows you to manually retract or extend the jack legs.Features: Replaces the crankhandle on your etrailer or Ram manual landing gear (STLG-5003321) Durable steel construction with corrosion-resistant zinc-plated finish Length: 21"
Replaces the 12" handle on your etrailer or Ram landing gear (STLG-5003312) and allows you to manually retract or extend the jack legs.Features: Replaces the crankhandle on your etrailer or Ram manual landing gear (STLG-5003312) Durable steel construction with corrosion-resistant zinc-plated finish Length: 12"
Replacement manual crankhandle comes in handy in case of lost power at your campsite or a mechanism failure. Use the crankhandle to manually raise and lower fifth-wheel landing gear.Features: Crankhandle manually retracts or extends your 5th-wheel landing gear legs in case of power or mechanical failure Can also be used with Lippert electric stabilizer jacks Overall length: 29"
Pull the front-facing plunger pin on this heavy-duty jack to release the drop leg for an extra 13-1/2" of lift. The durable jack screw offers increased strength. Get maximum lifting power in low gear and fast cranking in high gear.Features: 2-Speed jack lets you raise and lower your trailer Low gear offers full lifting power High gear provides ultimate speed Ideal for agricultural and commercial applications Drop leg with spring return increases overall extension for maximum adjustability Plunger pin positioned to the side Durable 1-1/4" jack screw allows for heavy lifting Twin thrust bearings make extending and retracting jack easy Effortless greasing with built-in grease zerk Black painted inner and outer tubes Sidewind handle has curved edges - no sharp ends Handle can be secured for travel with included weld-on clip Footplate minimizes sinking in soft ground Weld-on installation Specs: Height: 28" Retracted 40-1/4" Extended Lift: 12-3/8" Drop leg adjustment: 13-1/2" Total adjustment: 25-7/8" Lift capacity: 10,000 lbs Support capacity: 12,000 lbs Outer tube width: 4" Inner tube width: 3-1/2" Footplate dimensions: 8-1/4" long x 8" wide Adjustment hole spacing on drop leg: 3-3/8" from center of hole to center of hole 1-Year warranty
... The bow-tie bases steady the jacks on soft surfaces. Includes handle.Features: Scissor jacks help to stabilize 5th-wheel, travel, horse, and cargo trailers Bow-tie bases keep the jacks steady, even on soft surfaces Heavy-gauge steel construction ensures durability and strength Black powder coat finish provides protection from rust and corrosion Easy bolt-on installation with included hardware Handle included Specs: Height: Collapsed: 4-1/4" Extended: 24" Lift: 24" Collapsed length: 26-3/16" Mounting base dimensions: 10-1/4" long x 3-1/4" wide Large bolt hole dimensions: 11/16" long x 7/16" wide Small bolt hole diameter: 5/16" Load capacity: 10,000 lbs (5,000 lbs per jack) Quantity: 2 jacks 90-Day warranty Note: This jack set is designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer.
... The bow-tie bases steady the jacks on soft surfaces. Includes handle.Features: Scissor jacks help to stabilize 5th-wheel, travel, horse, and cargo trailers Bow-tie bases keep the jacks steady, even on soft surfaces Heavy-gauge steel construction ensures durability and strength Black powder coat finish provides protection from rust and corrosion Easy bolt-on installation with included hardware Handle included Specs: Height: Collapsed: 4-1/4" Extended: 30" Lift: 30" Collapsed length: 32-1/2" Mounting base diameter: 9" Mounting bolt diameter: 3/8" Load capacity: 10,000 lbs (5,000 lbs per jack) Quantity: 2 jacks 90-Day warranty Note: This jack set is designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer.
Hand crank for your HappiJac camper jack system allows you to manually raise and lower your jacks.Features: Hand crank lets you manually raise and lower your truck bed camper jacks Works with all HappiJac camper jack systems 4" Long shaft
Replaces the manual emergency crankhandle for your electric A-Frame jack (EJ-3520-BBX or EJ-3520-WBX). Includes 10 mm socket on end of crankhandle.Features: Replaces the manual emergency crankhandle for your electric A-Frame jack (EJ-3520-BBX or EJ-3520-WBX) Includes 10 mm socket on end of crankhandle
Designed to level and stabilize your trailer or RV, each of these jacks provide simple, effective leveling. Manual crank can be switched out for a motor (LG-142178 - sold separately). Retracted height is 32-3/4". ... Features: Landing gear set lets you raise and lower your trailer Ideal for 5th-wheel trailers and RVs Connecting rod allows for simple, tandem operation Footplates offer stability and prevent sinking Durable, black powder coated outer tubes and zinc-finished inner tubes provide excellent corrosion resistance Manual hand crank included 12V DC motor (LG-142178 - sold separately) is available Specs: Leg height: Retracted: 32-3/4" Extended: 53-1/4" Total lift: 36-1/2" Screw travel: 20-1/2" Drop leg travel: 16" Outer tube length: 29-1/2" Combined weight capacity: 8,000 lbs Gear ratio 3:1 Distance between legs: 44-1/2" When positioned as close together as possible 72" When positioned as far apart as possible Footplate dimensions: 8" long x 6-1/8" wide Adjustment hole spacing on drop leg: 1" from center of hole to center of hole Distance from bottom of upper weld stop to top of lower weld stop: 15-1/2" Distance from top of upper weld stop to bottom of lower weld stop: 17-1/2" 1-Year warranty Note: Landing gear is designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer.
... 19-1/2" inside to inside between weld stops. Includes manual crank and 1 motor, with room to add a 2nd one (sold separately).In fact, they should operate more efficiently, allowing you to spend less time cranking and more time camping. Note: Do not use landing gear to lift your trailer or RV during tire changes or service work, because doing so will exceed the capacity of the landing gear.
... 19-1/2" inside to inside between weld stops. Includes manual crank and 1 motor, with room to add a 2nd one (sold separately).In fact, they should operate more efficiently, allowing you to spend less time cranking and more time camping. Note: Do not use landing gear to lift your trailer or RV during tire changes or service work, because doing so will exceed the capacity of the landing gear.
Filters
