Replaces the jack leg for your Bigfoot 8K hydraulicjacks.Features: Replaces the jack leg for your Bigfoot 8K hydraulicjacks Works with all 8K square leg Bigfoot hydraulicjacks Includes jack leg and foot Cylinder and pump not included Made in the USA
Replaces the right jack leg for your Bigfoot 12K hydraulicjacks.Features: Replaces the right jack leg for your Bigfoot 12K hydraulicjacks Works with all 12K square leg Bigfoot hydraulicjacks Includes jack leg - foot, cylinder, and pump not included Made in the USA Specs: Footplate dimensions: 10" long x 10" wide Mounting bracket dimensions: 4" long x 7-1/2" wide
Replaces the left jack leg for your Bigfoot 12K hydraulicjacks.Features: Replaces the left jack leg for your Bigfoot 12K hydraulicjacks Works with all 12K square leg Bigfoot hydraulicjacks Includes jack leg with foot Cylinder and pump not included Made in the USA
Replacement jack works with your existing etrailer or Ram hydraulic setup. Offers 24-1/4" of travel and a 59" extension. Welds on.Features: Replaces 1 Ram square-tube leg from your etrailer or Ram hydraulicjack setup Hydraulic pump and power unit (e43VV) sold separately Works with units offering up to 3,200 psi extension and 1,500 psi retraction pressures Welds on Provides stability with large, pivoting footplate Black paint finish Specs: Screw travel: 24-1/4" Bracket height: 34-7/8" Retracted 59" Extended Lift capacity: 12,000 lbs Support capacity: 15,000 lbs Foot pad: 10" long x 10" wide Quantity: 1 leg 1-Year warranty
The counter-balance valve integrated into this hydraulicjack eliminates drift and retraction while your trailer is stationary. It's ideal for a seasonal trailer that may sit for awhile, and it makes a great upgrade. ... Features: Hydraulic right/street-side jack leg works with your existing hydraulic setup Hydraulic pump and power unit (e43VV) and left/curb-side leg (e83VV) sold separately Works with units offering up to 3,200 psi extension and 1,500 psi retraction pressures Integrated counter balance valve eliminates drift and retraction Great for seasonal trailers Smooth and effortless operation, even for heavy loads Large, pivoting foot pad stabilizes on uneven surfaces Square tube Durable exterior-grade black finish Easy bolt-on installation Specs: Lift: 24-1/4" Bracket height: 34-7/8" Retracted 59" Extended Lift capacity: 12,000 lbs Support capacity: 15,000 lbs Mounting tabs: 7-1/2" x 4" Footplate dimensions: 10" long x 10" wide 1-Year warranty
The counter-balance valve integrated into this hydraulicjack eliminates drift and retraction while your trailer is stationary. It's ideal for a seasonal trailer that may sit for awhile, and it makes a great upgrade. ... Features: Hydraulic left/curb-side jack leg works with your existing hydraulic setup Hydraulic pump and power unit (e43VV) and right/street-side leg (e23VV) sold separately Works with units offering up to 3,200 psi extension and 1,500 psi retraction pressures Integrated counter balance valve eliminates drift and retraction Great for seasonal trailers Smooth and effortless operation, even for heavy loads Large, pivoting foot pad stabilizes on uneven surfaces Square tube Durable exterior-grade black finish Easy bolt-on installation Specs: Lift: 24-1/4" Bracket height: 35-7/8" Retracted 59" Extended Lift capacity: 12,000 lbs Support capacity: 15,000 lbs Mounting tabs: 7-1/2" x 4" Footplate dimensions: 10" long x 10" wide 1-Year warranty
According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…
Hey Jay, welcome back! So the overall width of the outer leg of the Atlas IV Hydraulic Trailer Jack #ST23FR is 4 inches. It is actually 4 inches by 4 inches. The foot plate is 8 inch by 11 inch. What are you planning on installing this on?
Hey Michael! We are still carrying Draw-Tite hitches. However, their parent company had some legal problems and went bankrupt so the brand is for sale right now. Most of their products are currently out of stock, so you won't find them on our…
The 7290 that you see is a casting number. It is found on AL-KO hubs that fit #99 spindles. I found that the bearings used are #28580 which would be the inner bearing and #25580 which would be the outer bearing. For the seal use #91030.
Hey Dale, thanks for reaching out. For your 2010 Toyota Tundra with the factory tow package, a proportional controller is definitely the way to go for smooth braking on a 2-axle trailer, and a really clean option is the Redarc Tow-Pro Liberty…
Hey Cary, I did some research and it looks like the hitch height for your 2026 GMC 1500 AT4X AEV is right at 24 to 25 inches in height. Typically trailer's have a coupler height that is between 16 and 19 inches in height so I would go with the 7…
Hey Tim welcome back! Your ARH15AACBL2 GE AC unit has the old 410a refrigerant in it so the GE Appliances item #GE64FR you were looking at isn't going to work as a replacement. The EPA mandated R32 refrigerant has been used in all new AC's…
Hello Edward, Thanks for writing in! I don't have the plumbing schematics or floor plans for every camper, so I can't confirm whether the Seaflo RV Toilet #SE85MR will fit your 2016 CrossRoads Sunset Super Lite Travel Trailer based on the…
Hey Juan! Depending on the jacks you may be able to add a motor like #LC196308 but you have to make sure it is rated for the weight up front (you're probably around 6,000 lbs but could be more). For a complete replacement I recommend the…
The Dexter "8-248" is a hub assembly for 3,500 lb axles that uses an L68149 inner bearing and a L44649 outer bearing. This hub assembly was offered in both 5 on 4-1/2" and 5 on 4-3/4" bolt patterns therefore you would need to…
The hinge you referenced part #PLR2212-AS would replace what you have now on your horse trailer and the holes would line up. It looks like for your window you'd need a piano hinge that's about 2 feet long, but at this time we do not have any…
Yes, it will David. To use the Hydraulic Jack w/ Integrated Counter Balance Valve item #e23VV on your dump trailer, you'll need the Stillwell NeXgen Zero Leak 6-Port Hydraulic Ball Valve item #ST38FR. It'll tap right into your dump…
Add hydraulic lift to an A-frame work trailer with this 7K double-acting jack. It connects to an external HPU through #6 JIC ports, bolts to a 5" x 5" mounting pattern, and provides 20" of lift with a pivoting 7" foot.Match the Jack to Your Hydraulic System This jack does not include its own pump. It connects to a separate double-acting hydraulic power unit through two 9/16-18 #6 SAE JIC 37-degree flare ports.
Add hydraulic lift to an A-frame work trailer with this 7K double-acting jack. Includes 4 hoses, 8 fittings, and a diverter to help connect it to an external HPU, while 20" of lift handles hitching and unhitching.Connect the Jack to Your External Hydraulic System This jack does not include its own pump. It connects to a separate double-acting hydraulic power unit through two 9/16-18 #6 SAE JIC 37-degree flare ports.
Replacement left/curb side jack works with your existing etrailer or Ram hydraulic setup. Offers 24-1/4" of travel and a 59" extension. Bolts on.Features: Replaces the left-side Ram square-tube leg from your etrailer or Ram hydraulicjack setup Hydraulic pump and power unit (e43VV) and right leg (e73VV) sold separately Works with units offering up to 3,200 psi extension and 1,500 psi retraction pressures Bolts on using built-in, pre-drilled mounting tabs Provides stability with large, pivoting footplate Black paint finish Specs: Screw travel: 24-1/4" Bracket height: 34-7/8" Retracted 59" Extended Lift capacity: 12,000 lbs Support capacity: 15,000 lbs Foot pad: 10" long x 10" wide Mounting tabs: 7-1/2" x 4" Quantity: 1 leg 1-Year warranty
Upgrade a heavy trailer with a 20K tandem hydraulicjack system. Two 12K legs share one 12V pump for powered lifting with 24" of lift, plus a manual override gives you a backup if the trailer loses power.With two legs supporting the front of the trailer, you also get a wider stance than a single center-mounted jack. One Pump Runs Both Jacks, with a Backup for Power Loss This is a drive-and-slave setup. One jack carries the 12V hydraulic power unit, while hydraulic lines connect the second jack into the same circuit.
Upgrade a cargo, livestock, or equipment trailer from manual cranking with a self-contained 8K hydraulicjack. The integrated 12V pump, keyed control, 24" of lift, and manual override give you powered operation with a backup for power loss.Self-Contained Hydraulic System: One jack, pump, and reservoir keep the hydraulic power together at the trailer. Complete Installation Package: Includes brackets, hardware, hydraulic line, fittings, battery cable, and 80A breaker.
Upgrade a heavy cargo, livestock, or equipment trailer with a self-contained 12K hydraulicjack. The integrated 12V pump, keyed control, 24" of lift, and manual override give you powered operation with a backup for power loss.Self-Contained Hydraulic System: One jack, pump, and reservoir keep the hydraulic power together at the trailer. Complete Installation Package: Includes brackets, hardware, hydraulic line, fittings, battery cable, and 80A breaker.
Upgrade a bumper-pull trailer from manual cranking with an 8K hydraulic tongue jack. The dedicated 12V pump, local toggle control, standard tongue-jack mounting design, and 16-1/2" of lift give you a straightforward powered setup.Designed for Standard Tongue-Jack Openings: Bolt-on layout simplifies upgrading many common bumper-pull trailers. Self-Contained Hydraulic System: Dedicated pump and reservoir power the jack without another trailer hydraulic circuit.
Upgrade a heavy cargo, livestock, or equipment trailer from manual cranking with a self-contained 12K hydraulicjack. The integrated 12V pump, keyed control, mounting hardware, and 24" of lift give you a complete powered setup.Self-Contained Hydraulic System: One jack, pump, and reservoir keep the hydraulic power together at the trailer. Complete Installation Package: Includes brackets, hardware, hydraulic line, fittings, battery cable, and 80A breaker.
Upgrade your power-up/gravity-down dump trailer from manual cranking with a 10,000-lb Atlas IV jack. Double-acting operation powers extension and retraction, and the 60" kit includes the valve, hoses, and fittings to tie into your hydraulics.Double-Acting Control: Hydraulic pressure powers both extension and retraction for controlled operation. Connection Kit Included: Selector valve, four hoses, and fittings tie the jack into your trailer's hydraulic system.
Smooth and powerful hydraulicjack kit includes everything you need to lift your heavy load with a press of a button. The selector valve safely controls movement while the pivoting foot pad stabilizes the jack on rough terrain.Features: Hydraulicjack kit contains everything you need to lift your tandem axle trailer quickly and safely Ideal for use with horse and livestock trailers, as well as commercial and construction trailers Double acting pump and power unit attach to the jacks with included hoses and fittings Pump offers up to 3,200 psi extension and 1,500 psi retraction pressures Selector valves create smooth and efficient operation, even for heavy loads Pivoting foot pads stabilize on uneven surfaces Square tubes with durable exterior-grade black finish welds onto your trailer's frame Specs: Lift: 20" Bracket height: 30-3/4" Retracted 50-3/4" Extended Lift capacity: 10,000 lbs per jack 20,000 lb combined Support capacity: 12,000 lbs per jack 24,000 lbs combined Maximum hydraulic flow rate: 2 GPM Maximum pressure: Raising: 3,200 psi Lowering: 1,500 psi 3-Year warranty Note: Color may vary.
Upgrade a heavy work or dump trailer from manual cranking with 10,000-lb capacity and 26" of lift. This double-acting Atlas uses power-up/power-down hydraulics and welds directly to the frame. Compatible HPU required.If your dump trailer already has a compatible power-up/power-down hydraulic system, you can add a compatible Stillwell connection kit with the selector valve, hoses, and fittings needed to let the jack share your trailer's existing hydraulic system.
Upgrade your dump trailer from manual cranking with a 10,000-lb Atlas IV jack that shares a compatible power-up/power-down hydraulic system. The 60" kit includes the valve, hoses, and fittings needed to tie it in.Double-Acting Control: Hydraulic pressure powers both extension and retraction for controlled operation. Connection Kit Included: Selector valve, four hoses, and fittings tie the jack into your trailer's hydraulic system.
Upgrade a heavy work or dump trailer from manual cranking with 10,000-lb capacity and 26" of lift. Double-acting operation powers extension and retraction. Pair with a compatible HPU or Stillwell dump-system connection kit.Choose the Hydraulic Setup That Matches Your Trailer This Atlas is the jack and mounting bracket, not a self-contained hydraulic system. For a direct hydraulic setup, pair it with a compatible double-acting HPU , along with the hoses and fittings needed for your installation.
Upgrade your power-up/gravity-down dump trailer from manual cranking with a 10,000-lb Atlas IV jack. Double-acting operation powers extension and retraction, and the 39" kit includes the valve, hoses, and fittings to tie into your hydraulics.Double-Acting Control: Hydraulic pressure powers both extension and retraction for controlled operation. Connection Kit Included: Selector valve, four hoses, and fittings tie the jack into your trailer's hydraulic system.
Smooth and powerful hydraulicjack kit includes everything you need to lift your heavy load with a press of a button. The selector valve safely controls movement while the pivoting foot pad stabilizes the jack on rough terrain.Features: Hydraulicjack kit contains everything you need to lift your single axle trailer quickly and safely Ideal for use with horse and livestock trailers, as well as commercial and construction trailers Double acting pump and power unit attach to the jack with included hoses and fittings Pump offers up to 3,200 psi extension and 1,500 psi retraction pressures Selector valve creates smooth and efficient operation, even for heavy loads Pivoting foot pad stabilizes on uneven surfaces Square tube with durable exterior-grade black finish bolts onto your trailer's frame Specs: Lift: 20" Bracket height: 30-3/4" Retracted 50-3/4" Extended Footplate dimensions: 9-1/2" x 9-1/2" Tube outer dimensions: 4" x 4" Lift capacity: 10,000 lbs Support capacity: 12,000 lbs Maximum hydraulic flow rate: 2 GPM Maximum pressure: Raising: 3,200 psi Lowering: 1,500 psi 3-Year warranty
Level and lift a heavy trailer with two 12K hydraulic legs, each powered by its own 12V pump. Independent controls let you adjust either side separately, while manual overrides give you a backup if the trailer loses power.One Pump for Each Jack: Independent hydraulic power units give you more control than a shared-pump tandem setup. Complete Installation Package: Includes brackets, hardware, hydraulic lines, fittings, battery cable, and 120A breaker.
Upgrade a heavy trailer with a 20K tandem hydraulicjack system. Two 12K legs share one 12V pump for powered lifting with 24" of lift. Complete install hardware is included; this setup does not provide side-to-side leveling.With two legs supporting the front of the trailer, you also get a wider stance than a single center-mounted jack. One Pump Runs the Two-Jack System This is a drive-and-slave setup. One jack carries the 12V hydraulic power unit, while hydraulic lines connect the second jack into the same circuit.
Level and lift a heavy trailer with two 12K hydraulic legs, each powered by its own 12V pump. Independent controls let you adjust either side separately, while 24" of lift and a 24K combined capacity handle demanding trailers.One Pump for Each Jack: Independent hydraulic power units give you more control than a shared-pump tandem setup. Complete Installation Package: Includes brackets, hardware, hydraulic lines, fittings, battery cable, and 120A breaker.
Filters
