8-1/4" x 3-1/4". Incandescent markerlight mounts on your trailer fender. Built-in reflex reflector. Amber light faces front, and red light faces rear. Surface mount to trailer with bracket. ... This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a sidemarkerlight or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a sidemarkerlight.
8-1/4" x 3-1/4". Incandescent markerlight mounts on your trailer fender. Built-in reflex reflector. Amber light faces front, and red light faces rear. Surface mount to trailer with bracket. ... This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a sidemarkerlight or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a sidemarkerlight.
Waterproof clearance/markerlight can be installed on either your driver's-side or passenger's-side trailer fender. Amber light faces front, and red light faces rear. ... Features: Dual clearance light installs on your trailer fender Amber lens faces front of trailer Red lens faces rear of trailer Reversible assembly can be installed on either driver's-side or passenger's-sidefenderLight pops out of bracket and flips around to switch sides Sonically sealed, waterproof housing and lens unit is submersible LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Polycarbonate lenses and housings Mounts on surface of trailer with black ABS plastic bracket - hardware not included 2-Wire pigtail - includes power lead and ground wire DOT compliant P2 rated Specs: Dimensions: 8-1/2" long x 1-11/16" tall x 13/16" deep Mounting hole dimensions (center to center): 1" Diodes: 2 Power draw at 12.8 volts: 0.033 amps Lifetime warranty on LEDs Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
Weatherproof clearance/markerlight installs on your driver-side trailer fender. Amber light faces front, and red light faces rear. Surface mount with ABS plastic base. 2-wire pigtail. ... Features: Dual clearance light installs on your trailer fender Amber lens faces front of trailer Red lens faces rear of trailer Designed for driver sidefender Weatherproof housing and lens protect against water damage LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate lens and housing Mounts on surface of trailer with black ABS plastic bracket - hardware not included 2-Wire pigtail - includes power lead and ground wire DOT compliant P2 rated Specs: Configuration: driver side (left side) Passenger side: DG52443VP (sold separately) Quantity: 1 fenderlight Diodes: 2 Overall dimensions: 6-1/4" long x 2-1/8" wide x 3/4" deep Distance between mounting holes (center on center): 1-1/16" 1-Year limited warranty
Weatherproof clearance/markerlight installs on your passenger-side trailer fender. Amber light faces front, and red light faces rear. Surface mount with ABS plastic base. 2-wire pigtail. ... Features: Dual clearance light installs on your trailer fender Amber lens faces front of trailer Red lens faces rear of trailer Designed for passenger sidefender Weatherproof housing and lens protect against water damage LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate lens and housing Mounts on surface of trailer with black ABS plastic bracket - hardware not included 2-Wire pigtail - includes power lead and ground wire DOT compliant P2 rated Specs: Configuration: passenger side (right side) Driver side: DG52444VP (sold separately) Quantity: 1 fenderlight Diodes: 2 Overall dimensions: 6-1/4" long x 2-1/8" wide x 3/4" deep Distance between mounting holes (center on center): 1-1/16" 1-Year limited warranty
Waterproof LED clearance/markerlight installs on your driver's-side or passenger's-side trailer fender. Amber light faces front, and red light faces rear. ... Features: Dual clearance light installs on your trailer fender Amber lens faces front of trailer Red lens faces rear of trailer Reversible assembly can be installed on either driver's-side or passenger's-sidefender Sealed, waterproof unit includes durable, polycarbonate housing and UV-resistant lens Military-grade construction of circuit board Urethane potting offers better protection than common epoxy potting Premium LEDs are energy efficient, long-lasting, and vibration resistant Rated for up to 100,000 hours of operation Clear lens over red and amber LEDs Surface-mount installation - hardware not included Available cover (TN88XR) adds a protective case for the light 2-Wire pigtail White wire for ground Red wire for power Meets or exceeds FMVSS 108 standards Specs: Quantity: 1 fenderlight Dimensions: 1-1/2" long x 3/4" wide x 3/4" deep Distance between mounting holes (center on center): 1" Diodes: 2 Input voltage: 9V - 14V Power draw: 0.04 - 0.07 amps Wire length: 9" IP rated: 68 Limited lifetime warranty
2-1/8" x 1-1/8" Rectangle. Waterproof, LED trailer light serves as either a sidemarkerlight or clearance light when properly mounted. Durable polycarbonate lens and housing. Stud mount to trailer. ... This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a sidemarkerlight or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a sidemarkerlight.
2-1/8" x 1-1/8" Rectangle. Waterproof, LED trailer light serves as either a sidemarkerlight or clearance light when properly mounted. Durable polycarbonate lens and housing. Stud mount to trailer. ... This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a sidemarkerlight or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a sidemarkerlight.
4" x 1-1/4" Oval. Waterproof trailer light functions as a clearance or sidemarkerlight. Durable polycarbonate base and lens. Mounts on surface of trailer with bracket (sold separately). ... Features: Small, oval trailer light serves as either a clearance or sidemarkerlight Sonically sealed, waterproof housing and lens unit is submersible LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate base with acrylic lens Amber lens with amber LEDs Compatible with 12V DC systems Mounts on surface of trailer with bracket (sold separately) Accepts industry standard 1-wire and 2-wire plugs (sold separately) P2 rated light produces a 90-degree beam pattern Specs: Overall dimensions: 4" long x 1-1/4" tall x 1" deep Diodes: 2 Power draw at 12V: 0.051 amps Lifetime LED warranty
Pre-wired fenderlight assembly mounts on top or side of your fender to mark the widest point on your trailer. The bracket has 1 amber front clearance light and 1 red rear clearance light. ... Features: Pre-wired LED light assembly mounts on fender to mark widest point of trailer Amber LED light points toward front of trailer to act as front clearance light Red LED light faces rearward to act as rear clearance light Long-lasting LEDs are great replacements for incandescent lights No bulbs to replace - no brittle filaments More efficient - provide brighter light with less power draw Sealed, polycarbonate lenses are waterproof Easy installation with durable, ABS plastic mounting bracket and housing Mounting screws not included 2-Wire design - includes ground wire and lead wire for power Department of Transportation compliant Meets FMVSS 108 and CMVSS requirements for automotive lighting Specs: Application: trailers over 80" wide Installs on right fender (passenger's side) of trailer Housing dimensions: 1-5/8" wide x 4-3/4" long x 1-1/4" tall Width including lights: 2-1/8" Diodes: 2 Power draw: 0.047 amps at 12.8 volts Lifetime warranty on LEDs 3-Year warranty on housing and wiring
Pre-wired fenderlight assembly mounts on top or side of your fender to mark the widest point on your trailer. The bracket has 1 amber front clearance light and 1 red rear clearance light. ... Features: Pre-wired LED light assembly mounts on fender to mark widest point of trailer Amber LED light points toward front of trailer to act as front clearance light Red LED light faces rearward to act as rear clearance light Long-lasting LEDs are great replacements for incandescent lights No bulbs to replace - no brittle filaments More efficient - provide brighter light with less power draw Sealed, polycarbonate lenses are waterproof Easy installation with durable, ABS plastic mounting bracket and housing Mounting screws not included 2-Wire design - includes ground wire and lead wire for power Department of Transportation compliant Meets FMVSS 108 and CMVSS requirements for automotive lighting Specs: Application: trailers over 80" wide Installs on left fender (driver's side) of trailer Housing dimensions: 1-5/8" wide x 4-3/4" long x 1-1/4" tall Diodes: 2 Power draw: 0.047 amps at 12.8 volts Lifetime warranty on LEDs 3-Year warranty on housing and wiring
Waterproof, 2-LED markerlight with chrome trim can be installed on either your driver's-side or passenger's-side trailer fender. Amber light faces front, and red light faces rear. ... So this type of light can be used as either a sidemarkerlight or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a sidemarkerlight.
3-3/4" x 7/8" Oblong. Waterproof LED markerlight can be installed on your trailer fender. Amber light faces front, and red light faces rear. Surface mount to trailer with bracket. 2-Wire pigtail. ... This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a sidemarkerlight or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a sidemarkerlight.
3-15/16" x 1-1/4". Waterproof LED markerlight can be installed on your trailer fender. Amber light faces front, and red light faces rear. Surface mount with bracket (not included). ... This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a sidemarkerlight or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a sidemarkerlight.
3-7/8" x 1-1/4" Rectangle. Waterproof, 2-LED trailer markerlight mounts on your trailer fender. Amber light faces front, and red light faces rear. Surface mount with bracket (sold separately). ... This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a sidemarkerlight or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a sidemarkerlight.
3-15/16" x 1-1/4". Waterproof, incandescent trailer markerlight mounts on your trailer fender. Amber light faces front, and red light faces rear. Mounts to trailer with bracket (sold separately). ... This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a sidemarkerlight or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a sidemarkerlight.
3-15/16" x 1-1/4". Waterproof LED markerlight can be installed on your trailer fender. Amber light faces front, and red light faces rear. Surface mount to trailer with bracket (not included). ... This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a sidemarkerlight or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a sidemarkerlight.
3-15/16" x 1-1/4". Waterproof LED markerlight can be installed on your trailer fender. Amber light faces front, and red light faces rear. Surface mount to trailer with bracket. ... This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a sidemarkerlight or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a sidemarkerlight.
3-7/8" x 1-1/4" Rectangle. Trailer fenderlight functions as both amber front clearance and red rear clearance light. Hard-wired terminals are potted with polyurethane. Surface mounts with bracket (sold separately). ... This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a sidemarker or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a sidemarkerlight.
7-7/8" x 3-1/4". Waterproof light acts as brake, tail, turn, sidemarker, side reflex reflector, rear clearance, rear reflex reflector, and license plate light for trailers wider than 80". ... When properly installed, this type of light can function as both a front clearance light and a sidemarkerlight or as a rear clearance light and sidemarkerlight.
... It installs easily and covers all your essential lighting needs.Features: Trailer light kit designed to provide complete lighting for trailers under 80" wide Includes tail lights, sidemarkerlights, wiring harness, and license bracket Provides all required lighting and reflectors for DOT compliance 20&' Trailer harness allows full trailer connection License bracket made of corrosion-free black plastic that flexes on impact Mounting hardware and installation instructions included Easy installation for complete setup Includes 1 complete trailer light kit Specs: Application: Trailers under 80" wide Tail light dimensions: 4-3/4" x 4-1/2" Harness length: 20' Light colors: Red, white, amber
Be seen with this compact 3/4" round LED light for clearance or side marking. Fits snugly in a recessed mount with the included grommet and works with 12V and 24V systems. Fully sealed and submersible - great for your boat trailer! ... This beam pattern makes the light visible from the front and both sides, enhancing visibility and safety. When properly installed, it functions as both a front clearance light and a sidemarkerlight or as a rear clearance light and a sidemarkerlight.
3-7/8" x 1-1/4" x 7/8". Waterproof, LED trailer light serves as a sidemarkerlight or a clearance light. GloLight lens creates a solid panel of light. Wiring and bracket (sold separately) for installation. ... So this type of light can be used as either a sidemarkerlight or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a sidemarkerlight.
3-7/8" x 1-1/4" x 7/8". Waterproof, LED trailer light serves as a sidemarkerlight or a clearance light. GloLight lens creates a solid panel of light. Wiring and bracket (sold separately) for installation. ... So this type of light can be used as either a sidemarkerlight or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a sidemarkerlight.
Filters
