Result: eq 104

You can use the RV Propane Gas Detector #RS64FR to replace your current Atwood 31013 propane gas detector. This will also use a 12v, 2-wire installation like your current detector.

I would be happy to help you find the best suspension upgrades for your Winnebago 2455BHS Travel Trailer. First while we do not carry the blue version of the Road armor 3500-8000lb equalizers you mentioned, the Road Armor #LC696740 are the exact same…

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

If the shackles are flipping the wrong direction frequently that typically means the leaf springs are too short, the hanger spacing is too big, or the shackles are too short. Most of the time it's somebody changed leaf springs and just went with…

It's okay to replace leaf springs with ones rated for more weight and pretty common to do so but keep in mind, the higher you go the rougher the ride will be. If you have a utility trailer then I'd probably opt for the higher rated 5,000 lb…

Generally the issue when shackles flip when hauling empty is that they are too short. So I recommend measuring them from center hole to center hole and assuming they are less than 3 inches, replacing them with longer ones, the 3-1/8" Shackle…

First thing you want to do is verify that you are using the correct dimensions for your hanger spacing on your trailer. The distance between the center hanger and either of the outside hangers should be right at 29-1/2 inches. There should be at…

From the numbers you provided it sounds like you need replacement grease seals. In my research, the grease seals I found with the GS-1719DL number have a 1.72 inside diameter and 2.565 outside diameter. The replacement double lip grease seals you…

Yes, the Replacement 5-5/8" Equalizers for E-Z Flex Heavy Duty Rubber Suspension System #K71-654-00 will work for your trailer since the dimensions match with your current equalizers. These will work with axles up to 6,000lbs. I believe the kit…

Although they are not rated significantly higher, installing the #e57SR could result in a noticeable difference in the ride. Springs rated for your 3,500 lb axle (1,750 lb spring capacity) would be the better option. I'm not sure what you had…

When installed properly the portion of the bearing that attaches to the spindle should not spin. Only the outer portion should be spinning. It's pretty easy to overtighten a spindle nut since they don't have to be very tight so that would be…

If your trailer has 7 wires running all the way back to the brakes, then yes, you can tap into the existing wiring. Each of your new brakes will have two wires for the brake magnet. One wire is for 12 volt power to the brake magnets and the other…