Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
If you are replacing your tub and shower diverter faucet you need to measure the center-to-center length of your connections as well as know what type you have. For example if you take a look at the accompanying photo you can see the Ultra Faucets…
view full answer...Even though you have a 2 inch tall frame to weld a pipe mount to the 3 inch pipe mount that comes with the Bulldog Jack #BD190758 will still attach securely enough to it. You'll just need to have it welded around the mount where it touches the…
view full answer...Most pintle hooks use a standard bolt pattern which is 3-3/8" horizontally center to center and 1-3/4" vertically center to center (see photo). Therefore, the Pintle Hook part #C48231 would be a direct fit and work well for you. It also…
view full answer...Thanks for getting back to me, Carman! Was wondering if you were going to say that. There aren't a whole lot of RV toilet brands out there and we are fairly new to carrying them, so all the feedback we can get is very appreciated, even if it…
view full answer...Thanks for the pictures! To replace your Dexter 13-143 equalizers you will want the E-Z Flex Equalizers item #K71-655-00. This is the exact replacement to your equalizes. They have an identical 7-3/4" bolt hole to bolt hole dimension.
view full answer...It looks like the previous owner of the trailer had vehicle tires installed since there are very few trailer tire manufacturers that carry a 235/75R15 size. Even though it might work for a while, trailer tires are always better to use for trailer…
view full answer...We do have a few idler hub assemblies with threaded lug bolt holes currently available, such as the Redline Complete Agricultural Hub Assembly #AH30660FCOMP. This hub has a 6 on 6 bolt pattern and will fit Spindle #TRU34FR. It has an inner bearing…
view full answer...The correct trailer hub to use with the Agricultural Spindle part #TRU67FR is the Trailer Hub Assembly part #AH60880FCOMP which features an 8 on 8" bolt pattern. The Dexter Trailer Idler Hub Assembly part #42660UC1 will not fit the Agricultural…
view full answer...The Complete Agricultural Hub Assembly for Spindle AS3000F #AH30660FCOMP has threaded bolt holes for the 1/2 inch Lug bolts that come with the hub. We don't have any that are the same 6 on 6 inch bolt pattern with lug studs, but the lug bolts…
view full answer...You'll have to pull the hub off and either get me the dimensions of the spindle where the bearings ride or the bearing numbers out of the hub to determine if we have something that will fit. You'll need a caliper to do this. If you get back…
view full answer...The Bearing #29749 has a 1.5 inch inner diameter and the #LM67048 has a 1.250 inch inner diameter. I was able to find the complete assembly for you as Complete Agricultural Hub Assembly #AH30660FCOMP.
view full answer...Bearing measurements need to be as accurate as possible, to at least the thousandth of an inch, and require calipers if you have to measure them. Otherwise look at the bearing numbers that are stamped into the sides of the bearings. With those…
view full answer...