This Dutton-Lainson sidewind swivel jack is a back saver when hitching and unhitching loaded trailers. The heavy-duty D-L tongue jack reduces the effort required to maneuver a trailer into hitching position or to remove the trailer from a vehicle.Features: Easy installation: Bolt on mounting Can be mounted in a variety of ways on various sizes of trailer tongues Made from heavy-gauge steel for strength and durability Enclosed outer tube retards sand and dirt from contacting miter gears and heavy-duty Acme screw All mounting hardware included Floating miter gears allow for proper clearance and easier operation Maximum manueverability from offset swivel caster assembly Zinc plated TUFFPLATE finish Ergonomic hand grip with textured surface Made in the USA Specs: Mounting: 3" x 5" trailer frames Overall length: 26-5/8" Wheel dimensions: 8" diameter x 2" wide Bracket height: Retracted: 13" Extended: 23" Total lift: 10" Inner tube diameter: 2" Outer tube diameter: 2-1/4" Handle radius: 6-1/2" Lift capacity: 1,500 lbs 3-Year limited warranty How to Determine the Lift Capacity You Need in a Jack A trailer jack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball.
This Dutton-Lainson sidewind swivel jack is a back saver when it comes to hitching and unhitching trailers. Silver finish.Features: Easy to install- bolt on mounting Tongue jack can be mounted in a variety of ways on various sized trailer tongues Smooth operating Enclosed outer tube retards sand and dirt from contacting the miter gears and heavy-duty Acme screw Resists rust and corrosion, even in areas with salt Premium TUFFPLATE zinc finish has a 500-hour salt spray rating All mounting hardware is included 2-1/2" Diameter mounting hole in swivel bracket fits most other brands of mounting hardware Floating miter gears allow for proper clearance and easier operation Maximum maneuverability from the offset swivel caster assembly Ergonomic hand grip with textured surface Made from heavy-gauge steel for strength and durability Silver finish Made in the USA Specs: Application: square trailer tongues up to 3" x 5" Bracket height: 24" Retracted 33" Extended Lift: 10" Clearance: 10-1/2" from mounting bracket to top of jack Inner tube diameter: 1-3/4" Outer tube diameter: 2" Pull pin diameter: 1/2" Wheel diameter: 6" Lift capacity: 1,000 lbs 3-Year limited warranty How to Determine the Lift Capacity You Need in a Jack A trailer jack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball.
Dutton-Lainson sidewind swivel jack with a 6" dual wheel can be a real back saver when hitching and unhitching loaded trailers.Features: Easy to install: Bolt on mounting Can be mounted in a variety of ways on various sizes of trailer tongues Smooth operating Heavy-duty tongue jacks reduce physical effort required to maneuver loaded trailers into hitching position or removing the trailer from a vehicle Made from heavy-gauge steel for strength and durability The enclosed outer tube retards sand and dirt from contacting the miter gears and heavy-duty Acme screw Has maximum manueverability because of the offset swivel caster assembly Ergonomic hand grip with textured surface Made in the USA Specs: Capacity: 1,500 lbs Lift: 12" Fits square tongues up to 3" x 5" All mounting hardware included 2-1/2" Diameter mounting hole in swivel bracket Fits most other brands of mounting hardware Zinc plated TUFFPLATE finish for longer life 3-Year limited warranty How to Determine the Lift Capacity You Need in a Jack A trailer jack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball.
Dutton-Lainson pull pin easy swivel industrial top winding jack.In fact, a jack with a higher lift capacity should operate more efficiently, allowing you to spend less time cranking and more time camping. Trailer and Camper Jack Lift Every jack offers a certain amount of lift or travel.
Dutton-Lainson pull pin, easy swivel side wind trailer jack with foot.In fact, a jack with a higher lift capacity should operate more efficiently, allowing you to spend less time cranking and more time camping. Trailer and Camper Jack Lift Every jack offers a certain amount of lift or travel.
This Dutton-Lainson industrial jack is top wind with a 2,000 lb capacity.In fact, a jack with a higher lift capacity should operate more efficiently, allowing you to spend less time cranking and more time camping. Trailer and Camper Jack Lift Every jack offers a certain amount of lift or travel.
Dutton-Lainson pull pin swivel side wind trailer jack with foot. Matte black finish.In fact, a jack with a higher lift capacity should operate more efficiently, allowing you to spend less time cranking and more time camping. Trailer and Camper Jack Lift Every jack offers a certain amount of lift or travel.
If a tire gives out on your camper, you need a jack that handles the weight. The Tallboy combines compact size with 12-ton lift capacity and provides some serious lift. And the oversized base plate helps with stability on rough ground.Highlights Lift Trailers and Service Trucks: 12-ton capacity safely handles heavy campers, trailers, and work trucks. Adjustable Range with Included Extensions: Lift range of 11-5/16" to 27" tall fits under axles and reaches frames.
... It supports up to 20,000 lbs yet weighs just 11 lbs for easy handling and storage.Features: Enables you to easily change a tire on your tandem-axle trailer Heavy-duty, crescent-shaped wedge with rocker design raises trailer off the ground Serves as a wheel chock to help keep your trailer in place on inclines and most surfaces Flip over and place narrow end in front of wheel Levels out your RV when it is parked on uneven terrain Drive up onto wedge to balance out your motor home Constructed of heavy-duty, corrosion-resistant cast aluminum Made in the USA Specs: Weight capacity: 20,000 lbs Dimensions: 24" long x 6-1/8" wide x 6" tall Weight: 11 lbs Lifetime warranty The Blaylock EZ trailer jack and wheel chock makes it easy to change or service a tire on your dual-axle trailer. Simply place the wedge in front of the tire that does not need to be changed.
This system uses stainless steel cables with sturdy springs to make it easy for you to raise and lower the tailgate on your open utility trailer. Units mount on both sides of the trailer to assist each side of the tailgate evenly, preventing warping.Features: Lift assist allows you to easily lift and lower the tailgate on your utility trailer Cables attach to springs in the rear of the units and take on the weight of the tailgate 2-Piece system attaches to both sides of trailer for even, uniform lifting and lowering of tailgate Reduces wear and helps prevent damage to hinges Helps keep tailgate from warping Durable stainless steel cables Self-lubricating, thermoplastic rollers help guide the cables, control movement, and reduce wear Rust-resistant eco-finish on springs ensures lasting quality Sturdy solid steel tubing has corrosion-resistant powder coat finish Fast, easy installation with included hardware Drilling required Specs: Application: open utility trailers with square-tube, round-tube, or angle-iron side walls Trailer side rail height: 12" to 24" from trailer bed Trailer tailgate height: 4' to 6' from trailer bed Weight capacity: 300 lbs Individual unit dimensions: 6' long x 2" wide x 2" tall Spring length: 25" Cable dimensions: 58" long x 3/16" diameter 1-Year limited warranty The Gorilla-Lift tailgate assist reduces the amount of force needed to lift or lower your tailgate.
The Triple Lift jack adapts to multiple vehicles, ATVs, UTVs, and motorcycles with its ability to remove the lift saddle. The locking safety bar holds the jack in place once raised, removing the need for jack stands.Features: Perfect for vehicle, ATV, UTV, and motorcycle maintenance Raises, lowers, and stabilizes multiple vehicle types and frames Removable lift saddle and padded lift rails Allows the jack to convert from a floor jack to an ATV jack Safety bar locks into place for security Removes the need for jack stands Ball bearing swivel casters make it easy to maneuver Built-in tie-down loops to secure your motorcycle or ATV while in the lifted position Wide base and wheels provide more stability for lifting loads safely Meets ANSI standards Specs: Weight capacity: 2 tons Lift: 5-1/4" - 17-1/2" 1-Year warranty Note: This jack is designed to lift and stabilize 2 tons and should not be used to lift over that weight.
Just pull the easy-to-access pin on this jack to drop the entire jack tube down for quick, easy adjustment. No drop leg needed. Seven height settings offer up to 12" of drop. ... The release pin on this jack is conveniently located right above the mount for easy access. In addition, the pin on this jack is spring-loaded so that you don't have to remove the pin to drop the tube. Instead, just remove the clip from the quick-release pin and grab the built-in, easy-to-grip handle.
Electric camper jack system lets you load and unload your truck bed camper faster and easier than manual cranking. Jacks install permanently on the 4 corners of your camper. Zinc-plating resists corrosion.The jacks bolt on permanently to each corner of your camper and provide support to handle even multi-slide campers, which can weigh more than a traditional in-bed camper. Electric Operation for Fast and EasyLifting For fast, convenient operation, these remote-controlled electric camper jacks extend and retract with the push of a button.
Electric camper jack system lets you load and unload your truck bed camper faster and easier than manual cranking. Jacks install permanently on the 4 corners of your camper. Zinc-plating resists corrosion.The jacks bolt on permanently to each corner of your camper and provide support to handle even multi-slide campers, which can weigh more than a traditional in-bed camper. Electric Operation for Fast and EasyLifting For fast, convenient operation, these remote-controlled electric camper jacks extend and retract with the push of a button.
Load and unload your truck bed camper with these manual camper jacks. Jacks install permanently on the 4 corners of your camper for stable and convenient loading and unloading.However, 1 person can do the job by alternately cranking each jack in small increments. When lifting and lowering your camper, be sure to keep the front of it higher than the rear, and always keep it level side to side. Easy Installation The included brackets are used to attach the jacks to each corner of your camper.
Load and unload your truck bed camper with these manual camper jacks. Jacks install permanently on the 4 corners of your camper for stable and convenient loading and unloading.However, 1 person can do the job by alternately cranking each jack in small increments. When lifting and lowering your camper, be sure to keep the front of it higher than the rear, and always keep it level side to side. Easy Installation The included brackets are used to attach the jacks to each corner of your camper.
After a long drive, the last thing you want is to crank your trailer jack by hand. This electric jack does the heavy lifting with a push of the switch, and the drop leg and foot plate help you get level fast so you can settle in and relax.Bolt-On Design for Easy Install: Mounts fast with included hardware. Easy Drop Leg Adjustment: Drop leg extends up to 4-1/2" for extra lift when you need it.
Built tough for off-road use! Designed in Australia to stand up to the rigors of the Outback. Dual rubber tires can easily track through mud and gravel. Premium zinc finish offers great rust protection. 10" Screw travel and 8" drop leg.The built-in grease zerk lets you lubricate the internal screw when necessary for continued smooth operation over time. Safe, Easy, Out-of-the-Way Positioning for Travel A sturdy magnet is built into the jack's easy-to-grip crank handle for secure attachment of the jack crank.
Built tough for off-road use! Designed in Australia to stand up to the rigors of the Outback. Dual rubber tires can easily track through mud and gravel. Premium zinc finish offers great rust protection. 11" Screw travel and 7-1/2" drop leg.The built-in grease zerk lets you lubricate the internal screw when necessary for continued smooth operation over time. Safe, Easy, Out-of-the-Way Positioning for Travel A sturdy magnet is built into the jack's easy-to-grip crank handle for secure attachment of the jack crank.
Ratcheting jack lets you inch your trailer into tight spaces. Designed in Australia to stand up to the rigors of the Outback. Easily tracks through mud and gravel and offers great rust protection. 10" Screw travel and 8" drop leg.The built-in grease zerk lets you lubricate the internal screw when necessary for continued smooth operation over time. Safe, Easy, Out-of-the-Way Positioning for Travel A sturdy magnet is built into the jack's easy-to-grip crank handle for secure attachment of the jack crank.
Built tough for off-road use! Designed in Australia to stand up to the rigors of the Outback. Dual rubber tires can easily track through mud and gravel. Premium zinc finish offers great rust protection. 11" Screw travel and 7-1/2" drop leg.The built-in grease zerk lets you lubricate the internal screw when necessary for continued smooth operation over time. Safe, Easy, Out-of-the-Way Positioning for Travel A sturdy magnet is built into the jack's easy-to-grip crank handle for secure attachment of the jack crank.
Just pull the easy-to-access pin on this jack to drop the entire jack tube down for quick, easy adjustment. No drop leg needed. Seven height settings offer up to 12" of drop. ... Features: Utility jack lets you raise and lower your trailer 7 Height settings allow for fast, easy positioning - no blocks or drop leg needed Lower the jack from the mounting bracket to get up to 12" of lift Manually crank the jack to achieve up to an additional 15-1/2" of travel Jack retracts to be flush with bottom of trailer frame Eliminates risk of damaging hang-ups or snags while traveling Can also be entirely removed from mount to provide clearance above frame for easy access to vehicle's rear hatch Low-friction ball screw minimizes resistance to reduce wear, noise, and heat Ball bearings roll smoothly through threads of jack screw - no direct, friction-inducing contact Steel construction is durable Zinc finish resists corrosion Sidewind handle allows for simple cranking Mounting bracket can be welded or bolted on Wheel included Specs: Application: 3" x 3" or 3" x 4" trailer framers Height: Extended: 43-1/2" Retracted: 28" Total lift: 27-1/2" Travel by cranking the handle: 15-1/2" Drop tube: 12" - adjusts in increments of 2" Inner tubing diameter: 2" Outer tubing diameter: 2-1/4" Wheel diameter: 5-3/4" Lift capacity: 1,500 lbs Static capacity: 2,500 lbs 1-Year limited warranty
Built tough for off-road use! Designed in Australia to stand up to the rigors of the Outback. Dual rubber tires can easily track through mud and gravel. Powder coat finish offers great rust protection. 10" Screw travel and 8" drop leg.The built-in grease zerk lets you lubricate the internal screw when necessary for continued smooth operation over time. Safe, Easy, Out-of-the-Way Positioning for Travel A sturdy magnet is built into the jack's easy-to-grip crank handle for secure attachment of the jack crank.
Built tough for off-road use! Designed in Australia to stand up to the rigors of the Outback. Dual rubber tires can easily track through mud and gravel. Powder coat finish offers great rust protection. 10" Screw travel and 8" drop leg.The built-in grease zerk lets you lubricate the internal screw when necessary for continued smooth operation over time. Safe, Easy, Out-of-the-Way Positioning for Travel A sturdy magnet is built into the jack's easy-to-grip crank handle for secure attachment of the jack crank.
Filters
