Waterproof, 5-3/4" x 3-1/4" LED dockinglights produce bright white light for safe docking and launching. Alerts other boats of your position. Stainless steel covers. Hardwires with 12" long pigtail.Features: Pair of LED dockinglights provides bright white light for improved safety and visbility when docking and launching your boat at night Sealed, waterproof units include durable, die-cast aluminum housings and UV-resistant lenses Military-grade construction of circuit board Urethane potting offers better protection than common epoxy potting Stainless steel covers offer finished look Premium LEDs are energy efficient, long-lasting, and vibration resistant Rated for up to 100,000 hours of operation Clear lenses over white LEDs 12V and 24V DC compatible Surface-mount installation - hardware not included Included gaskets create weathertight seals and protect boat's finish Great for aluminum and fiberglass hulls Hardwires to your application Specs: Quantity: 2 dockinglightsLight dimensions: 5-3/4" long x x 3-1/4" wide x 1" thick Distance between mounting holes: 4-1/4" Light output: 1,400 lumens per light Diodes: 3 per light Input voltage: 9V - 30V Power draw: 0.85 - 1.15 amps per light Wire length: 12" 18 Gauge Limited lifetime warranty
Alert other boats of your position and direction of travel with these waterproof LED dockinglights. Provides 2,000 lumens each for safe docking in reduced visibility. Stainless steel covers and aluminum heat sinks. 12" Long, 3-wire pigtail.Features: Pair of LED dockinglights lets you dock and launch safely Helps you avoid collisions with debris and other vessels at night or in reduced visibility Low-intensity and high-intensity functions provide low-beam and high-beam light output Sealed, waterproof units include durable polycarbonate housings and UV-resistant lenses Military-grade construction of circuit board Urethane potting offers better protection than common epoxy potting Aluminum heat sinks help dissipate heat Rustproof stainless steel covers create a finished look Premium LEDs are energy efficient, long-lasting, and vibration resistant Rated for up to 50,000 hours of operation Clear lens over white LEDs 12V and 24V DC compatible Recessed-mount installation in boat's hull - requires cutouts Included gaskets create weathertight seals and protect boat's finish 3-Wire pigtail hardwires to your application White wire - high intensity beam Yellow wire - low intensity beam Black wire - ground Assembled in the USA Specs: Quantity: 2 dockinglightsLight dimensions: 6-5/8" long x 3-1/8" wide x 2-3/4" thick Distance between mounting holes: 5-1/2" Light output (per light): 2,000 lumens at high intensity 600 Lumens at low intensity Diodes: 1 per light Input voltage: 9V - 30V Power draw: 1.25 - 1.75 amps per light Wire length: 12" Limited lifetime warranty
Dockinglights are essential if you're going to be docking after dark. This kit features (2) 35-watt halogen lights, stainless steel mounting brackets, rubber bracket boots, and a safety-fused wiring harness with lighted switch.Features: (2) 35-Watt halogen lights Mounting brackets: Constructed of corrosion-resistant stainless steel Include rubber bracket boots Hardwire, safety-fused wiring harness Lighted switch Black ABS plastic housing Specs: Light dimensions: 6" long x 3" tall, 4" tall with post x 2-3/4" wide 3-Year warranty
8-1/16" x 2-7/8" Rectangle. Waterproof lights act as brake, tail, turn, side marker, side reflex, rear clearance, rear reflex, and license plate light for trailers wider than 80". ... This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light.
7-9/16" x 3-5/16" Oval. Waterproof LED trailer tail lights function as stop, turn, and tail signal lights when properly mounted. Durable polycarbonate housing and lens. Reccessed mount with grommet. ... Features: Oval LED trailer tail lights serves 3 functions when properly mounted Brake light Tail Light Turn Signal Sonically sealed, waterproof housing and lens unit is submersible Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibration Allows for improved heat distribution LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Red lens over white LEDs Polycarbonate lens and housing Recessed mount with included grommets Includes industry-standard 3-prong plugs for connections Specs: Quantity: 2 trailer tail lights Overall dimensions: 7-9/16" long x 3-5/16" tall x 1-3/4" thick Light face: 6-1/2" long x 2-5/16" tall Diodes: 12 6 LEDs per light Powerdraw at 12.8V: Stop/turn: 0.161 amps Tail: 0.007 amps Lifetime warranty on LEDs Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
From dockinglights to work truck strobes, TecNiq offers high performance, value driven LED lighting built tough and backed for life.Features: Powered by 11 LEDs Hermetic seal for dust and waterproofing Durable impact resistant lens Exceeds FMVSS 108 standards Can be mounted at any angle Specs: Measurements: 15-1/2" long; 1-1/4" tall, 1/2" deep LEDs: 11 Color: Red Voltage: 9 to 14 volts DC Mounting: Surface mounted using (2) screws (screw caps included) Connector: 9" pigtail Lifetime warranty TecNiq's Stop Tail Turn Light is a quality waterproof lamp that can be mounted in unique locations where space is at a premium.
Improve vision when docking and undocking your boat at night with this 5-11/16" x 1-1/4" waterproof LED dockinglight. 6 diodes produce 900 lumens of white light. ... Features: Low-profile LED dockinglight produces bright white light for increased visiblity and safety when docking and undocking your boat Helps prevent collisions by alerting other vessels of your position and direction of travel Premium LEDs are energy efficient, long-lasting, and vibration resistant Rated for up to 100,000 hours of operation Constructed with durable plastic Military-grade construction circuit board to ensures years of trouble-free service Sealed with urethane potting, which offers better protection from water and dust than common epoxy potting Transparent lens helps produce a clear colored light Lens is impact and UV-resistant Surface-mount installation Mounts to side of the deck floor Compatible with 12V DC systems Hardwires to your application Specs: Dimensions: 5-11/16" long x 1-1/4" wide x 7/16" thick LED color: white Distance between mounting holes: 5-1/4" Light output: 900 lumens Diodes: 6 Input voltage: 9V - 14V Power draw: 0.450 - 0.550 amps Wire length: 12" IP rating: 68 Limited lifetime warranty
From dockinglights to work truck strobes, TecNiq offers high performance, value driven LED lighting built tough and backed for life.Features: Powered by 11 LEDs Guaranteed circuit board protection Durable impact resistant lens Exceeds FMVSS 108 standards, IP68 rated for dust and water proofing Multiple mounting positions Wire functions: Yellow: reverse Red: stop/turn Black: running lights White: ground Specs: Measurements: 15-1/2" long; 1-1/4" tall, 1/2" deep LEDs: 3 Color: Clear lens Voltage: 9 to 14 volts DC Mounting: Surface mounted using (2) screws (screws not included - screw caps included) Connector: 9" wire Lifetime warranty TecNiq packs wide angle and bright illumination for maximum safety while retaining a sleek design.
All-in-one port-side light combines navigation, docking, and courtesy lighting in a compact stainless housing. IP68 sealed with a 1750-lumen docking beam and a 30" pigtail, it installs fast and meets ABYC A-16 and USCG 2 NM visibility.Features: 3-in-1 Design: navigation, docking, and courtesy lighting IP68 dust- and waterproof sealing with TecSeal potted electronics 316 Stainless steel cover; C5 corrosion-certified Thermal overheat protection for long service life Waveguide courtesy lighting: 12 LEDs; dedicated nav: 1 LED; docking: 2 LEDs Surface mount design; no large holes to seal Specs: Orientation: Port side (red navigation) Dimensions: 2-7/16" x 1-1/4" x 3-15/16" LED count: 15 total (12 courtesy, 2 docking, 1 nav) Brightness (docking): 1,750 lumens Voltage: 914 VDC; current: 1.0 A per light Mounting: Surface mounts with (2) #8 screws (not included) Wiring: 30" sheathed pigtail Wire colors: Black: ground White: docking Yellow: navigation Compliance: ABYC A-16; USCG visibility 2 NM Lifetime limited warranty The TecNiq 3 in 1 navigation, docking, and courtesy light is designed to give boaters an all in one solution for safety and coastal boating regulations.
From dockinglights to work truck strobes, TecNiq offers high performance, value driven LED lighting built tough and backed for life.Features: Powered by 288 LEDs 144 Blue LEDs 144 White LEDs Frosted acrylic lens for even light distribution Black aluminum housing provides better heat dispersion Comes with 12" sheathed pigtail Parallel mounting clips sold separately Specs: Measurements: 48" long x 1-7/8"" tall x 5/16" deep LEDs: 288 LEDs Brightness: White / 4,720, Blue / 420 Color: White / Blue Voltage: 9 to 14 volts DC Mounting: surface mount Wiring: 12" sheathed pigtail Lifetime warranty TecNiq packs 288 white and blue LEDs in the Slim Line surface mount light, providing over 5,000 lumens and thousands of hours of light.
All-in-one starboard-side light combines navigation, docking, and courtesy lighting in a compact stainless housing. IP68 sealed with a 1750-lumen dock beam and a 30" pigtail, it installs fast and meets ABYC A-16 and USCG 2 NM.Features: 3-in-1 design: navigation, docking, and courtesy lighting IP68 dust- and waterproof sealing with TecSeal potted electronics Stainless steel cover; C5 corrosion resistance Thermal overheat protection for long service life Waveguide courtesy lighting: 12 LEDs; dedicated nav: 1 LED (green); docking: 2 LEDs (white) Surface-mount design; no large holes to seal Specs: Orientation: Starboard side (green navigation) Dimensions: 2-7/16" wide x 1-1/4" tall x 3-15/16" long LED count: 15 total (12 courtesy, 2 docking, 1 nav) Brightness (docking): 1,750 lumens Electrical: 914 VDC; ~1.0 A per light Mounting: Surface mounts with (2) #8 screws (not included) Wiring: 30" sheathed pigtail Wire colors: Black: ground White: docking Yellow: navigation Compliance: ABYC A-16; USCG visibility 2 NM Lifetime warranty The TecNiq 3 in 1 navigation, docking, and courtesy light is designed to give boaters an all in one solution for safety and coastal boating regulations.
Perfect for campers, RV travelers, and anyone using a trailer, these jacks make life easier and more enjoyable. They're designed with comfort and convenience in mind, helping you save time and energy for what matters most - your journey.Power Connection: Wires directly to 12V power source Automatic Reset, No Hassle: The 20A automatic reset relay fuse protects the jacks motor from overloads or short circuits and resets itself automatically, no need for spares or replacements Nighttime Convenience: LED courtesy light on front of jack makes nighttime setup simple Protective Cover: Canvas cover shields your jack from the suns harmful rays and harsh weather Emergency Backup: Manual crank included for peace of mind when needed Moisture Protection: Rubber cover over the crank opening keeps out moisture and the elements Durable Finish: Tough black powder coat finish resists rust and corrosion Specs: Lift: 18" Drop leg adjustment: 4-1/2" Total adjustment: 22-1/2" Lift capacity: 5,000 lbs Dimensions: Overall height: 29-1/2" Mounting plate height: 8-7/8" Footplate diameter: 5-1/2" Outer tube diameter: 2-1/4" Motor voltage: 12 volts 2-Year warranty
If every step rattles the dishes or settling into your chair rocks the camper, it's time for more stability. With the I-Beam Stabilizer, everything settles down and you get that firm, planted feeling, like your rig's anchored in place.The I-Beam Stabilizer puts an end to all that, trading that floating on a dock feeling for the confidence of solid ground under your feet. Fast, Drill-Free Mounting The stabilizer arms slide onto the outer lip of your I-beam and lock in place, so you can get set up or packed up in minutes without drilling, welding, or making permanent changes.
Ease into tight slips with one light that handles it all - a bright docking beam for approaches, a soft courtesy glow at anchor, and a nav light that keeps you visible - sealed and corrosion resistant for long, worry free nights on the water.Features: C5 certified - highly resistant to corrosion from salt and other elements Stainless steel body for protection in salt and fresh water Thermal overheat protection for longer service life Surface-mount design - easy install with (2) #8 screws; no large holes to seal TecSeal potting for guaranteed circuit board protection Dual output: (12) LED waveguide courtesy light + (3) LED high-powered dockinglight (15 LEDs total) White LED with white lenses; port-side stainless cover option available Specs: Dockinglight outputs up to 1,750 lumens Operates on 9-14V DC; draws 1.0A per light Dimensions: 3-15/16" x 2-7/16" x 1-1/4" Sheathed pigtail connector: 30" long Lifetime warranty TecNiq has delivered a light designed to give boaters a sleek design and effective lighting.
Guiding you safely back to shore, this all-in-one light brightens your dock with powerful LEDs while adding a soft courtesy glow for your crew. Built tough for salt or fresh water, it keeps every night return smooth and stress-free.Features: Powered by 15 LEDs 12 Dedicated waveguide courtesy LEDs 3 Dedicated docking LEDs Stainless steel body protects against salt and fresh water conditions Sealed design keeps circuit boards safe Overheat protection to extend the lifespan of the light Surface mount design requires no large holes Specs: Measurements: 2-7/16" wide, 1-1/4" tall, 4" long Position: Starboard side LEDs: 15 LEDs Brightness: 1750 lumens Color: White Voltage: 9 to 14 volts DC; Current: 1 amp per light Mounting: Surface mounts with (2) #8 screws Wiring: 30" sheathed pigtail Lifetime warranty TecNiq has delivered a light is designed to give boaters a sleek design and effective lighting.
This 17' LED light strip has a weatherproof exterior that makes it perfect for indoor or outdoor use. 300 Diodes produce a bright white light. Cut-to-fit installation with peel-and-stick adhesive backing. ... Features: 17' LED light strip provides flexible lighting for indoor and outdoor spaces Sonically sealed, waterproof exterior protects LEDs against the elements LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Simple installation - no drilling required Cut to desired length for application and mount with peel-and-stick adhesive backing Hardwires to any 12-volt power source with 2-Wire pigtail Specs: Light color: white Overall length: 17' Width: 3/8" Number of diodes: 300 Power draw at 12V: 2.7 amps Lifetime warranty on LEDs
8-1/16" x 2-7/8" Rectangle. Waterproof lights act as brake, tail, turn, side marker, side reflex, rear clearance, rear reflex, and license plate light for trailers. Surface mount - hardware included. 3-Wire pigtail. 25' Wiring harness.This beam pattern can be clearly seen when you are standing directly in front of the light, as well as when you are standing on either side of the light. When properly installed, this type of light can function as both a front clearance light and a side marker light or as a rear clearance light and side marker light.
... Red light.Features: Oblong trailer tail light serves 3 functions Stop light Tail light Turn signal light Smoked lens works great with blacked-out style on vehicles or trailers Sonically sealed, waterproof housing and lens unit is submersible LED lights are highly efficient, durable, and long-lasting Durable polycarbonate lens and housing Mounts on surface with built-in black flange - hardware not included 3-Wire pigtail DOT compliant Specs: Overall dimensions: 12-5/8" long x 1" tall x 1/2" deep Mounting holes: 11-3/4" apart on center Weight:.44 lbs Diodes: 9 Voltage: 12V Amp draw: Tail: 0.01A Stop: 0.2A Lifetime LED warranty
This incandescent trailer light kit comes with everything needed to properly light your trailer. 2 Tail lights, 2 amber clearance lights, 2 amber reflectors, license plate bracket, 25' wiring harness with 4-pole connector, and mounting hardware.When properly installed, this type of light can function as both a front clearance light and a side marker light or as a rear clearance light and side marker light.
From dockinglights to work truck strobes, TecNiq offers high performance, value driven LED lighting built tough and backed for life.Improve area and accent lighting with surface mount dome lighting.
6-7/16" Waterproof light displays brake, tail, and turn signals on your trailer. Mounts in a cutout with a grommet (sold separately) and works with 3-prong plugs.How to Mount Trailer Light This light installs in a grommet (A70GB - sold separately) and requires cutting a hole into your trailer if it doesn't have one already.
2-1/8" x 1-1/8" Rectangle. Waterproof, LED trailer light serves as either a side marker light or clearance light when properly mounted. Durable polycarbonate lens and housing. Stud mount to trailer. ... This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light.
3-7/8" x 1-1/4" x 7/8". Waterproof, LED trailer light serves as a side marker light or a clearance light. GloLight lens creates a solid panel of light. Wiring and bracket (sold separately) for installation. ... So this type of light can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light.
Keep your 12V system charged and ready without adding another maintenance task. This 40-amp, 3-bank onboard marine battery charger delivers controlled multi-stage charging and long-term battery care, so you're not troubleshooting before launch.Matching the correct profile keeps charging behavior consistent across the system, so you're not dealing with uneven performance between banks. Adjusts to Shore Power Limits Not every dock or marina delivers consistent power. This unit includes selectable power levels that let you reduce AC input to 100%, 75%, 50%, or 25%.
Filters
