... backingplates and hardware. WLL is 2,000 lbs per D-ring. recessed portion of the D-ring to sit inside Backingplates attach directly under D-ring anchors and on the opposite side of the mounting surface 16 Nuts, 16 lock washers, and (16) 5/16" x 2-1/4"
... ring. Includes backingplate and mounting hardware. over the ring without interference Included backingplate provides greater support than mounting the anchor directly to wood Zinc-plated steel construction resists corrosion and retains its strength
This sturdy D-ring serves as an attachment point for tie-down straps and bungee cords wherever you need cargo control. The recessed design allows you to roll cargo over the ring and is zinc-plated ... rotate D-ring so you can easily attach straps from any angle Recessed, low-profile design helps prevent D-ring from interfering as you roll cargo in and out of your trailer or truck bed Backingplate
... included backingplate and hardware. WLL is 265 lbs. gasket helps to create a seal against dirt and water when D-ring is surface mounted Also reduces corrosion and oxidation Backingplate reinforces the surface of your trailer where the tie-down is attached
... included backingplate and hardware. WLL is 265 lbs., bolt-on installation on flat surface Backingplate attaches directly under D-ring anchor and on the opposite side of the mounting surface 2 Nuts, 2 lock washers, and (2) 1/4" x 2-1/4" bolts
... backingplate and hardware. WLL is 400 lbs. design helps prevent D-ring from interfering as you roll cargo in and out of your trailer or truck bed Backingplate reinforces the surface of your trailer where the tie-down is attached Zinc-plated steel
D-Ring
Trailer Tie-Down Anchors
Truck Tie-Down Anchors
Tie-Down Cleats and Rings
Recessed Mount
400 lbs
Brophy
New Arrivals — From Our Shop to You!
Chosen by folks who live and breathe this, just like you.
New Arrivals — From Our Shop to You!
Chosen by folks who live and breathe this, just like you.
Zinc-plated, corrosion-resistant steel D-ring creates an attachment point for tie-down straps and bungee cords wherever you need cargo control. Built-in bolt allows for easy attachment to your ... Features: Tie-down anchor provides a solid point to secure your cargo with straps or bungee cords D-ring rotates 180 degrees so you can attach straps from multiple angles Included backingplate and
Zinc-plated steel backingplate reinforces a Brophy recessed D-ring tie-down anchor (RR05). Plate bolts on underneath the floor of your trailer to reinforce the area under the anchor for maximum ... Features: Backingplate reinforces the area where a Brophy recessed D-ring tie-down anchor (RR05) is mounted More secure installation means that the anchor is well supported Helps ensure that anchor
Backingplate lets you install your Brophy bolt-on D-ring tie-down anchor (DR01 - sold separately). Powder coated steel construction resists corrosion.Features: Backingplate provides mounting point for your Brophy D-ring tie-down anchor (DR01 - sold separately) D-ring bolts onto plate Black powder coated steel resists corrosion Made in the USA
This zinc-plated steel backingplate reinforces the tie-down anchors of your cargo control system. The sheet bolts onto the surface of your trailer and sits under the anchor for maximum support.Features: Backingplate reinforces the area around where your tie-down anchor is mounted Sits under the anchor for maximum support (RR01-C, RR02, or SR10-C - sold separately) Zinc-plated steel
Tie-down reinforcement plate for recessed swivel trailer tie-downs. The plate is is placed under the surface of the tie-down location to offer greater support than just the wood.
Black powder coated anchor slides into a 2x4 stake pocket on your flatbed truck or trailer. Movable anchor secures with the included pin and clip, so you can quickly and easily remove and reinstall it as needed. 5,000 lbs Maximum load. working load limit (WLL): 1,600 lbs Maximum load (break strength): 5,000 lbs Inner diameter of D-ring: 2" Anchor dimensions: 5-1/4" Tall from the bottom of the mounting plate to the bottom of the
This sturdy D-ring anchor bolts onto a backingplate (BP1D - sold separately) to create an attachment point for tie-down straps and bungee cords wherever you need cargo control. Zinc-plated steel ... Features: Tie-down anchor provides a solid point to secure your cargo with straps or bungee cords Requires backingplate (BP1D - sold separately) for installation D-ring rotates 180 degrees so you
Sturdy D-ring provides a solid attachment point for tie-down straps and bungee cords wherever you need cargo control. Simply bolts onto any flat surface. No need to cut a mounting hole. Zinc-plated ... design No need to cut a hole in your trailer or truck bed D-ring rotates 180-degrees so you can attach straps from multiple angles Zinc-plated steel construction resists rust and corrosion Optional backing
This steel D-ring creates an attachment point for tie-down straps and bungee cords wherever you need cargo control. The recessed design allows you to roll cargo over the ring and is zinc-plated for ... backingplate provides greater support than if the anchor was mounted alone (sold separately - BP05) Specs: Maximum load (break strength): 5,000 lbs Working load limit: 1,600 lbs. Anchor: Bezel dimensions
This steel backingplate for the E-track or D-ring in your enclosed trailer provides more support than just securing it with wood or metal screws. Bolt the plate to your E-track on the opposite side ... Features: Backingplate provides extra support for your E-track or D-ring (sold separately) Perfect for use in an enclosed trailer with a thin wall or floor Multiple pre-drilled holes make plate
These steel backingplates for (4) 8' E-tracks in your enclosed trailer provide more support than just securing it with using wood or metal screws. Bolt the plates to your E-tracks on the ... Features: Backingplates provide extra support for your 8' E-track (sold separately) Perfect for use in an enclosed trailer with a thin wall or floor Multiple pre-drilled holes make plates
These steel backingplates for the 8' E-track in your enclosed trailer provide more support than just securing it with using wood or metal screws. Bolt each plate to your E-track on the opposite ... Features: Backingplates provide extra support for your 8' E-track (sold separately) Perfect for use in an enclosed trailer with a thin wall or floor Multiple pre-drilled holes make plates
These steel backingplates for the 2' E-track in your enclosed trailer provide more support than just securing it with using wood or metal screws. Bolt each plate to your E-track on the opposite ... Features: Backingplates provide extra support for your 2' E-track (sold separately) Perfect for use in an enclosed trailer with a thin wall or floor Multiple pre-drilled holes make plates
These steel backingplates for the 5' E-track in your enclosed trailer provide more support than just securing it with using wood or metal screws. Bolt each plate to your E-track on the opposite ... Features: Backingplates provide extra support for your 5' E-track (sold separately) Perfect for use in an enclosed trailer with a thin wall or floor Multiple pre-drilled holes make plates
Corrosion-resistant zinc-coated anchor slides into a 2x4 stake pocket on your flatbed truck or trailer. Movable anchor secures with the included pin and clip, so you can quickly and easily remove and reinstall it as needed. 5,000 lbs Maximum load. working load limit (WLL): 1,600 lbs Maximum load (break strength): 5,000 lbs Inner diameter of D-ring: 2" Anchor dimensions: 5-1/4" Tall from the bottom of the mounting plate to the bottom of the
Black powder coated anchor slides into a 2x4 stake pocket on your flatbed truck or trailer. Movable anchor secures with the included pin and clip, so you can quickly and easily remove and reinstall it as needed. 5,000 lbs Maximum load. in place with included pin and clip D-ring is hinged, which allows straps to be attached from different angles Black powder coated steel is durable and rust resistant Made in the USA Specs: Safe
This durable steel D-ring creates an attachment point for tie-down straps and bungee cords wherever you need cargo control. The zinc-platedring resists corrosion and bolts onto a flat surface ... Features: Tie-down anchor provides a solid point to secure your cargo with straps or bungee cords Surface-mount design does not require you to cut a hole in your trailer or truck bed D-ring rotates
Corrosion-resistant zinc-coated anchor slides into a 2x4 stake pocket on your flatbed truck or trailer. Movable anchor secures with the included pin and clip, so you can quickly and easily remove and reinstall it as needed. 5,000 lbs Maximum load. working load limit (WLL): 1,600 lbs Maximum load (break strength): 5,000 lbs Inner diameter of D-ring: 1-3/8" Anchor dimensions: 5-1/4" Tall from the bottom of the mounting plate to the bottom of
Filters
