1. Tie Down Anchors
  2. Brophy
  3. D-Ring
  4. Tie-Down Cleats and Rings
  5. Surface Mount - Bolt-On
  6. Trailer Tie-Down Anchors
  7. Truck Tie-Down Anchors
Brophy D-Ring Tie Down Anchor w Backing Plate and Hardware - Bolt-On - Surface Mount - 265 lbs

Brophy D-Ring Tie Down Anchor w Backing Plate and Hardware - Bolt-On - Surface Mount - 265 lbs

Item # RR8K
lowest price pledge
Our Price: $9.80
Tie Down Anchors
Orders above $99 qualify for Free Shipping
Shipping Weight: 1.48 lbs
Quantity: 
In Stock
Brophy Trailer Tie-Down Anchors,Truck Tie-Down Anchors - RR8K
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Need help with installation?
Locate installers near me
This sturdy steel D-ring creates a stable tie-down point in your trailer or truck bed. Surface mount doesn't require that you cut a hole in your trailer or truck bed. Installs easily with the included backing plate and hardware. WLL is 265 lbs. Lowest Prices for the best tie down anchors from Brophy. Brophy D-Ring Tie Down Anchor w Backing Plate and Hardware - Bolt-On - Surface Mount - 265 lbs part number RR8K can be ordered online at etrailer.com or call 800-298-1624 for expert service.
  • All Info
  • Reviews (3)
  • Q & A (1)
  • Videos (2)
  • Photos
  • Why etrailer?

Brophy Tie Down Anchors - RR8K

  • D-Ring
  • Tie-Down Cleats and Rings
  • Surface Mount - Bolt-On
  • Trailer Tie-Down Anchors
  • Truck Tie-Down Anchors
  • 265 lbs
  • Brophy

This sturdy steel D-ring creates a stable tie-down point in your trailer or truck bed. Surface mount doesn't require that you cut a hole in your trailer or truck bed. Installs easily with the included backing plate and hardware. WLL is 265 lbs.


Features:

  • D-ring anchor provides tie-down point in your utility trailer or truck bed
    • Perfect for securing a rope, cargo net, bungee cord, or ratchet strap (sold separately)
  • Surface-mount design doesn't require you to cut a hole in your trailer or truck bed
  • Backing plate reinforces the surface of your trailer where the tie-down is attached
  • Zinc-plated steel resists rust and corrosion
  • Simple, bolt-on installation on flat surface
    • Backing plate attaches directly under D-ring anchor and on the opposite side of the mounting surface
    • 2 Nuts, 2 lock washers, and (2) 1/4" x 2-1/4" bolts included


Specs:

  • Maximum load (break strength): 800 lbs
  • Safe working load limit (WLL): 265 lbs
  • Anchor:
    • Base diameter: 4"
    • D-ring thickness: 1/4"
  • Backing plate dimensions: 6-1/2" long x 6" wide x 1/8" thick
  • Limited 1-year warranty


Distance between mounting holes on Brophy D-ring anchor

Note: Tie-down anchors must be chosen according to their safe working load limit (WLL). The weight of the secured cargo must not exceed the combined WLL of the anchors being used. For example, if you are using anchors with a WLL of 100 lbs each to tie down a load weighing 400 lbs, then you need at least 4 anchors to safely secure that load. It is recommended that you always use anchors in pairs.



RR8K Brophy Surface Mount Trailer Rope Ring Mount Kit w/ Backing Plate and Hardware - Zinc Plated Steel - 800 lbs





Video of Brophy D-Ring Tie Down Anchor w Backing Plate and Hardware - Bolt-On - Surface Mount - 265 lbs

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Brophy D-Ring Tie Down Anchor with Backing Plate Installation

Today we're going to be taking a look at the Brophy d ring tie down anchor with backing plate and hardware, part number RR8K. This sturdy d ring creates a stable tie down point for your truck bed or trailer. The beveled edge won't interfere with your wheel cargo the included backing plate allows it to have a two hundred and sixty-five pound safe working load limit and eight hundred pound break strength. It features an inch and a half opening on our d ring so we have plenty of room to run our straps through. It's made out of a sturdy steel construction with a zinc plating so it's going to resist rust and corrosion. It's perfect for securing rope, bungee cords or even ratchet straps, all of which are available right here at etrailer.com. Now that we've got all the features, I'll go ahead and show you how to get it installed. We've got two holes drilled out.

Let's go ahead and set it in place. We'll just take our hardware and put it through. Then we can go underneath and attach our backing plate. We're bringing our backing plate, we're going to use the two holes that match up with our bolts. Then we'll bring in a lock washer and bring in one of the nuts, get that started. Then, without holding it in place, do the same for the other side.

Then we can tighten it down. Now, on tightening it down, it's not a bad idea to get an extra set of hands to hold the bolt in place on top. Looks like our anchor point is secure. Let's go ahead and tie down our cargo. That's going to complete our look with the Brophy d ring tie down anchor with backing plate and hardware, party number RR8K.


Customer Reviews

Brophy D-Ring Tie Down Anchor w Backing Plate and Hardware - Bolt-On - Surface Mount - 265 lbs - RR8K

Average Customer Rating:  5.0 out of 5 stars   (3 Customer Reviews)

This sturdy steel D-ring creates a stable tie-down point in your trailer or truck bed. Surface mount doesn't require that you cut a hole in your trailer or truck bed. Installs easily with the included backing plate and hardware. WLL is 265 lbs.

- RR8K
by:

Installed on 2002 Triton XT-10 open placed trailer. Just replaced the decking and needed some upgraded tie downs. Decided upon these after much research and liked the idea of the surface mount to tie down for my 2 ATV's. Hardware appears to be heavy duty. It was well packed, all parts in tact and easy assembly. The plates provide good re-enforcement and prevent the bolts from driving thru the new decking. Just installed a few days ago. Have not had a chance to use them yet, but so far impressed with the product.


Comments
Worked so well I bought another one for my new trailer.
Bryan H - 09/21/2015



- RR8K
by:

Was looking for an anchor tie down that was flush on the trailer and easy to put on. Didn’t need anything super heavy duty works perfectly.



- RR8K
by:

These work great. Very secure. Highly recommend!!!


3
3

Ask the Experts about this Brophy Tie Down Anchors

  • Cargo Tie Down Recommendations for 5x8 Enclosed Cargo Trailer
    Between the three cargo tie-down anchors you referenced, parts # RR2K, # RR8K and # RR09, I would go with the # RR2K because it includes the reinforcing backing plate and because it offers you the choice of recessed or surface mounting. Since your cargo items just need to be secured inside the trailer, but not have their full weight held, these items should be fine. I can offer you another option to consider, one that might better suit the trailer and cargo items, but that will be up...
    view full answer...



  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality tie down anchors for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate tie down anchor information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Leah B
Edited by:
Leah B
Employee Rachelle B
Written by:
Rachelle B
Employee Dustin K
Video Edited:
Dustin K
Employee Cole B
Installed by:
Cole B
Employee Hayden R
Installed by:
Hayden R
Employee Jacob W
Updated by:
Jacob W

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.