1. Accessories and Parts
  2. Brophy
  3. Tie Down Anchors
  4. D-Ring Backing Plates
Backing Plate for D-Ring Tie-Down Anchors - 8 Hole - Qty 1

Backing Plate for D-Ring Tie-Down Anchors - 8 Hole - Qty 1

Item # BP12
lowest price pledge
Retail:$26.12
Our Price: $4.95
You Save: 81%
Accessories and Parts
Orders above $99 qualify for Free Shipping
Shipping Weight: 1.07 lbs
Quantity: 
In Stock
Accessories and Parts BP12 - D-Ring Backing Plates - Brophy
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

This zinc-plated steel backing plate reinforces the tie-down anchors of your cargo control system. The sheet bolts onto the surface of your trailer and sits under the anchor for maximum support. Call 800-298-8924 to order Brophy accessories and parts part number BP12 or order online at etrailer.com. Free expert support on all Brophy products. Guaranteed Lowest Price and Fastest Shipping for Backing Plate for D-Ring Tie-Down Anchors - 8 Hole - Qty 1. Accessories and Parts reviews from real customers.
  • All Info
  • Reviews (21)
  • Q & A (3)
  • Videos (2)
  • Photos
  • Why etrailer?

Brophy Accessories and Parts - BP12

  • Tie Down Anchors
  • D-Ring Backing Plates
  • Brophy

This zinc-plated steel backing plate reinforces the tie-down anchors of your cargo control system. The sheet bolts onto the surface of your trailer and sits under the anchor for maximum support.


Features:

  • Backing plate reinforces the area around where your tie-down anchor is mounted
    • Sits under the anchor for maximum support (RR01-C, RR02, or SR10-C - sold separately)
  • Zinc-plated steel resists corrosion
  • Simple, bolt-on installation
    • Mounting hardware not included


Specs:

  • Dimensions: 6-1/2" long x 6" wide x 1/8" thick
  • Quantity: 1 backing plate
  • 1-Year limited warranty


Note: Tie-down anchors must be chosen according to their safe working load limit (WLL). The weight of the secured cargo must not exceed the combined WLL of the anchors being used. For example, if you are using anchors with a WLL of 100 lbs each to tie down a load weighing 400 lbs, then you need at least 4 anchors to safely secure that load. It is recommended that you always use anchors in pairs.


Product Dimensions



BP12 Brophy Backing Plate for RR01, RR02, and SR10 D Ring Tie Down Anchors - Qty 1





Video of Backing Plate for D-Ring Tie-Down Anchors - 8 Hole - Qty 1

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Brophy Backing Plate for D-Ring Tie-Down Anchors Review

Today we're going to be taking a look at the Brophy Backing Plate, part number BP12. As you can see, we've got it mounted underneath our trailer here. It's going to act as an excellent reinforcement for our surface-mounted D-ring tie downs. It's a simple, blot-on installation. It's constructed out of a zinc plated steel, so it's going to resist rust and corrosion. It's a 6 by 6.5 inch plate, with numerous mounting locations, as seen here. Now that we've gone over the features, I'll go ahead and show you how to get it installed. The Brophy Backing Plate is going to work with a wide variety of Brophy tie-down anchors.

The one we're using today is part number SR10-C. Let's go ahead and show you how to get it installed. You will have to provide your own hardware. We're just using some bolts long enough to get through our trailer. We've already got some holes drilled out here, so we're just going to line it up, and then push our hardware through.

You want to make sure to put your ring down first, and then your mounting plate on top of it, that way it can move freely. Let's go ahead and put our hardware through, and then we can go underneath and install the backing plate. Now, as you can see, we have multiple holes for different mounting brackets, we're just going to use the two in the center since they line up with our bolts. Then, we're just going to use some lock washers, we'll put the nut in place, and then put the other one in place. You'll just want to be sure to use lock washers or locking nuts. When we tighten this down, it's not a bad idea to get an extra set of hands, to have somebody hold the bolt up top. With our backing plate installed, our D-ring anchor point is nice and secure.

With our cargo secure, we can get on the road. That's going to complete our look at the Brophy Backing Plate for D-ring Tie-Down Anchors, part number BP12.


Customer Reviews

Backing Plate for D-Ring Tie-Down Anchors - 8 Hole - Qty 1 - BP12

Average Customer Rating:  4.9 out of 5 stars   (21 Customer Reviews)

This zinc-plated steel backing plate reinforces the tie-down anchors of your cargo control system. The sheet bolts onto the surface of your trailer and sits under the anchor for maximum support.

- BP12
by:

Products have been great! Good quality and great service...thanks so much 634210



- BP12
by:

Does the job cheaper, but not as strong as the black powdered plates 704143



- BP12
by:

product as described with fast shipping to my door.... 645192



- BP12
by:

Works perfectly! 603770



- BP12
by:

awesome, worked great 539372



- BP12
by:

Product worked as expected 499279



- BP12
by:

I have a enclosed motorcycle trailer and the bikes will be tied down to Etrack this product is just what I required ,heavy duty construction ,it’s very costly for it to ship to Canada after the Us/CDN exchange plus the shipping but because this is already pre drilled that saves a lot of time and money so it all washes out , very happy with this product! 487689



- BP12
by:

Looking to find a sturdy backing plate for my e-track and found these online. They show two types and measurements are exactly the same but different price. I went with the less expensive one and they worked perfect! i paid for 3 day shipping and arrived on time. Will buy again when I install more E-track. 470049



- BP12
by:

Worked exactly as described and still doing the job today! 468927



- BP12
by:

Excellent equipment! 465572



- BP12
by:

It seems to be very well made and have nice plating. However,thru no fault of yours with the D rings that I already have the holes are too small in diameter and need to be re drilled. 455408



- BP12
by:

easy to install, hauls the Harley around fine. 449378



- BP12
by:

Used these to give my Etrack a little more reinforcement holes line up perfectly gives you that extra bit of confidence when your really cranking on those straps 447969



- BP12
by:

Not installed yet, but the quality seems very good! 306295



- BP12
by:

Product as described!!!!! 291849


Comments
Great !!!!!
Tony - 09/06/2017

27958

- BP12
by:

They work great. Allighnment holes fit very well and easy to install. 262001



- BP12
by:

Plate is holding strong after a year 241809



- BP12
by:

Actually used these on my motorcycle for mounting side gear. Work great, solid. 234653



- BP12
by:

Description was complete and accurate. I need to drill one additional hole to adapt the plate to my specific application. The speed of order fulfillment was outstanding. 217071



- BP12
by:

I want to acknowledge that it was very easy to place my order on e trailer and the products were just what I was looking for. I was extremely please with how fast my order was placed and shipped. I will make referrals to other because of these reasons. 208262



- BP12
by:

Very sturdy and fits the LRB1 d ring tie downs perfectly I purchased.... great purchase. 95514


21
21

Ask the Experts about this Brophy Accessories and Parts

  • Hardware Needed to Install Brophy Tie-Down SR10 on a Truck Bed Floor
    When installing the Brophy Light Duty D-Ring Tie Down Anchor # SR10-C to your truck bed floor, I'd recommend using the mounting plate # BP12, which will be placed under your truck bed directly under the D-ring. This will give you additional support for the D-ring so that you do not damage the bed of your truck. As for the hardware, Brophy recommends using 1/4" x 2 1/4" Zinc bolts, nuts and lock washers which you should be able to purchase locally at any hardware store. I've attached a video...
    view full answer...
  • What To Consider When Picking D-Ring Anchor Locations in an Enclosed Trailer
    D-ring placement in your 27 foot trailer would be best determined by considering what will be loaded in the trailer. Without knowing more about what you plan on putting in the trailer it would be hard for me to give you an exact diagram. I believe your best option would be to load your trailer up with what you plan to carry in it and then consider where the best places would be for D-rings like the part # RR01-C to be located to best secure the load. For a backing plate you would...
    view full answer...
  • D-Ring Recommendation for Trailer for Securing 2004 Honda Sabre
    The Brophy D-Ring Tie Down Anchor # RR01-C that you referenced has a 400 lb capacity per D-ring. If you used enough of these to match the capacity needed to secure your Honda Sabre and cargo they would work well. If your bike weighs 800 lbs two of these would have enough capacity. Using 4 like you mentioned would be more than enough. For backing plates for this you could also use the # BP12. For sealant to prevent leaks you could also use the part # 0160297. This sealant is designed...
    view full answer...

Do you have a question about this Accessories and Part?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality accessories and parts for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate accessories and part information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Updated by:
Laura H
Updated by:
Sarah W
Video by:
Dustin K
Installed by:
Cole B
Installed by:
Hayden R
Video Edited:
Chris R

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.