In-line 50-amp Type I circuitbreaker cycles automatically and continuously during an over-current condition. Composite alloy material will bend and separate the contacts when an over-current situation occurs and return to the run mode as it cools.Features: Plastic housing with perpendicular mounting bracket 1-Piece design withstands vibration Mounting bracket is integrated into housing Lighter than metal housing Cycling automatic reset Cycles continuously during over-current condition Returns to run mode when source of over-current is removed (2) 10-32 Studs Zinc with copper plate topcoat (copper color) on battery terminal Zinc plating (silver color) on auxiliary terminal Perpendicular mounting bracket SAE Standard J553-compliant Specs: Applications: accessory circuit, cooling fan, door locks, headlamps, tail lamps, window lift, sunroof, trailering package, electric brake controls Dimensions: Overall length, including mounting bracket: 2.00" Terminals: 0.66" long; 0.69" apart Mounting bracket center to center: 1.56" Mounting bracket hole diameter: 0.23" Housing: 1.28" long x 0.84" wide x 0.72" tall Current rating: 50 DC amp Voltage rating: 12 VDC (Voltage Direct Current) Operating temperature: -10 F to 150 F (-23 C to 65 C) Storage temperature: -20 F to 200 F (-29 C to 93 C) 1-Year limited warranty Note: 12V circuitbreakers are not recommended for 24V applications since the materials are heat-affected rather than current-affected.
2-Piece metal housing with perpendicular mounting bracket. Cycling automatic reset.Features: Metal housing with perpendicular mounting bracket 2-Piece design Attached by spot welding Cycling automatic reset Cycles continuously during over-current condition Returns to run mode when source of over-current is removed (2) 10-32 Studs Yellow, dichromate (copper color) plating on battery terminal Zinc plating (silver color) on auxiliary terminal Straight mounting bracket SAE Standard J553 compliant Specs: Applications: Accessory circuit, cooling fan, door locks, headlamps, tail lamps, window lift, sunroof, trailering package, electric brake controls Terminal dimensions: 0.66" long Current rating: 40 DC amp Voltage rating: 12 VDC (Voltage Direct Current) Operating temperature: -10 degrees F (-23 degrees C) to 150 degrees F (65 degrees C) Storage temperature: -20 degrees F (-29 degrees C) to 200 degrees F (93 degrees C) 1-Year limited warranty
Hey Kent. The 1,000 lbs rating on the Air Lift 1000 Air Helper Springs item #AL60732 is for the tongue weight. A 3,500 lbs trailer typically has a tongue weight of 350 lbs - 400 lbs plus you have to take in account how much gear and people you have…
Hello William, Thanks for writing in, you are correct the Firestone #F4155 is not a good fit for the 2021 to 2024 Sienna Hybrid. The hybrid models have some key differences in the rear suspension area due to battery placement and tighter coil spring…
Hey Stacey! To install the Victron Orion XS DC/DC RV Converter #VN93VR you will need appropriately sized wire and fuses. Victron recommends 16 mm² / 6 AWG (13.3 mm²) cable if the distance is less than 5 meters, and 4 AWG (21.2 mm²) if…
Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…
I reached out to my contact at Lippert and he said that both the Keypad 500456 and the 500457 module are obsolete but the Replacement Components Kit #LC359259 will work perfectly to replace both components. This will get your system back up and…
To replace your Power Gear controller #500457 you will need the Replacement Lippert Power Gear Manual Leveling Control Kit #LC359259. This will give you a new touchpad controller and the wiring necessary to work with your system.
Hey Nathan, the PowerMax panels like the part #PM59VR that you referenced use 12- VAC residential style miniature circuit brakers. Typical brands are ITE/Siemens, Murray, Crouse-Hinds, and Thomas & Betts.
I have a few different options for you depending on the route you would like to take. However, regardless of which route you pursue you will need to take some measurements of your outer jack tube length and weld stop spacing. If you are handy and the…
When you are looking for replacement landing gear the 2 big things to take into consideration are the weight of your trailer and the weld stop locations on your current setup. Since the GVWR of your 2004 Cougar is 10,300 lbs our Landing Gear Set w/…
There are a few things that go into making sure you choose the correct replacement landing gear. First you need to be sure that the landing gear is rated properly. If you check out the weight rating on your current landing gear just make sure the…
Hey Brian, the PD4135K is no longer available but we have the current version of it from WFCO with our part number #WF96FR which is lithium battery compatible.
Hey Gary, good question, especially if you’re trying to make sure your setup can handle it without overloading things. On the larger Velit units like #VE29QV (12K BTU), you’re looking at around 8–25 amps at 48V, with that higher number being at…
This circuitbreaker junction box provides a neat, clean way to mount multiple circuitbreakers to the firewall of your vehicle. Junction box has space for seven separate circuitbreakers.Features: Junction box for studded circuitbreakers Provides neat, clean mounting point for multiple circuitbreakers Has space for 7 studded circuitbreakers Includes bus bar to dissipate heat buildup Specs: Breaker slots: .20" x .30" 1-Year limited warranty 52-249 Pollak 7-Circuit-Breaker Junction Box
This surface-mounted 100-amp Type III circuitbreaker remains open on overload and has a unique reset mechanism which provides visible indication of tripped condition. Typically used in auxiliary and accessory circuits. ... Features: Surface mount Thermoset plastic housing 1-Piece design withstands vibration Mounting bracket is integrated into housing Lighter than metal housing Sealed for engine compartment and bilge area applications Splash-proof Dust-proof Unique reset mechanism provides visible indication of tripped condition SAE Standard J1625-compliant Specs: Applications: auxiliary and accessory circuits, such as trucks, buses, RVs, marine, battery charges, and DC audio systems Current rating: 100 DC amp Voltage rating: 12 VDC (Voltage Direct Current) Operating temperature: -25 F to 180 F (-32 C to 82 C) Storage temperature: -30 F to 300 F (-34 C to 149 C) 1-Year limited warranty Note: 12V circuitbreakers are not recommended for 24V applications since the materials are heat-affected rather than current-affected. 54-871PLP Pollak CircuitBreaker - 100 Amperes - Surface Mount - Manual Reset - Plastic Housing - Type 3
This single-pole, thermal circuitbreaker features a continuous cycle with an automatic reset. Breaker prevents battery from draining and auxiliary application from overdrawing. ... Features: Metal housing with straight mounting bracket 2-Piece design Attached by spot welding Cycling automatic reset Cycles continuously during over-current condition Returns to run mode when source of over-current is removed (2) 10-32 Studs Yellow, dichromate (copper color) plating on battery terminal Zinc plating (silver color) on auxiliary terminal Straight mounting bracket SAE Standard J553 compliant Specs: Applications: Accessory circuit, cooling fan, door locks, headlamps, tail lamps, window lift, sunroof, trailering package, electric brake controls Terminal dimensions: 0.66" long Current rating: 30 DC amp Voltage rating: 12 VDC (Voltage Direct Current) Operating temperature: -10 degrees F (-23 degrees C) to 150 degrees F (65 degrees C) Storage temperature: -20 degrees F (-29 degrees C) to 200 degrees F (93 degrees C) 1-Year limited warranty 54-530 Pollak Single-Way, Thermal CircuitBreaker - Cycling/Automatic Reset - 30 Amp Replaces 38630
This single-pole, thermal circuitbreaker features a continuous cycle with an automatic reset. Circuitbreaker prevents battery from draining and auxiliary application from overdrawing. ... Features: Metal housing with straight mounting bracket 2-Piece design Attached by spot welding Cycling automatic reset Cycles continuously during over-current condition Returns to run mode when source of over-current is removed (2) 10-32 Studs Yellow, dichromate plating (copper color) on battery terminal Zinc plating (silver color) on auxiliary terminal Straight mounting bracket SAE Standard J553 compliant Specs: Applications: Accessory circuit, cooling fan, door locks, headlamps, tail lamps, window lift, sunroof, trailering package, electric brake controls Terminal dimensions: 0.66" long Current rating: 20 DC amp Voltage rating: 12 VDC (Voltage Direct Current) Operating temperature: -10 degrees F (-23 degrees C) to 150 degrees F (65 degrees C) Storage temperature: -20 degrees F (-29 degrees C) to 200 degrees F (93 degrees C) 1-Year limited warranty Alternate to 9506P
Protect your vehicle's wiring when installing a brake controller by using this 30-amp circuitbreaker to prevent overloads. Connection cables are pre-crimped and include connectors and heat shrink. Designed for trailers with up to 3 axles.Features: 30-Amp circuitbreaker kit protects your vehicle from damaging shorts and overloads when an electric brake controller is installed Provides protection for vehicles towing trailers that have up to 6 brake assemblies Designed for use with Redarc Tow-Pro Elite (331-EBRH-ACCV2), Tow-Pro Classic (331-EBRHV2), and Tow Pro Liberty (RED24FR) brake controllers Connection wires come pre-crimped and with heat shrink to ensure durability and performance Just connect wires to circuitbreaker with included nuts Kit includes: (1) 30-Amp circuitbreaker with protective cover 2 Pre-crimped cables 2 Nuts for attaching cables to circuitbreaker 1 Butt connector Heat shrink Instruction sheet 2-Year warranty
This single-pole, thermal circuitbreaker features a continuous cycle with an automatic reset. Breaker prevents battery from draining and auxiliary application from overdrawing. ... Features: Metal housing with straight mounting bracket 2-Piece design Attached by spot welding Cycling automatic reset Cycles continuously during over-current condition Returns to run mode when source of over-current is removed (2) 10-32 Studs Yellow, dichromate (copper color) plating on battery terminal Zinc plating (silver color) on auxiliary terminal Straight mounting bracket SAE Standard J553 compliant Specs: Applications: Accessory circuit, cooling fan, door locks, headlamps, tail lamps, window lift, sunroof, trailering package, electric brake controls Terminal dimensions: 0.66" long Current rating: 40 DC amp Voltage rating: 12 VDC (Voltage Direct Current) Operating temperature: -10 degrees F (-23 degrees C) to 150 degrees F (65 degrees C) Storage temperature: -20 degrees F (-29 degrees C) to 200 degrees F (93 degrees C) 1-Year limited warranty 54-540 Pollak Single-Way, Thermal CircuitBreaker - Cycling/Automatic Reset - Straight Mounting Bracket - 40 Amp Alternate to 9510
In-line 30-amp Type I circuitbreaker cycles automatically and continuously during an over-current condition. Composite alloy material will bend and separate the contacts when an over-current situation occurs and return to the run mode as it cools.Features: Metal housing with perpendicular mounting bracket 2-Piece design Mounting bracket attached to circuitbreaker by spot welding Cycling automatic reset Cycles continuously during over-current condition Returns to run mode when source of over-current is removed (2) 10-32 Studs Yellow, dichromate plating (copper color) on battery terminal Zinc plating (silver color) on auxiliary terminal Perpendicular mounting bracket SAE Standard J553-compliant Specs: Applications: accessory circuit, cooling fan, door locks, headlamps, tail lamps, window lift, sunroof, trailering package, electric brake controls Dimensions: Overall length, including mounting bracket: 2.00" Terminals: 0.66" long; 0.69" apart Mounting bracket center to center: 1.56" Mounting bracket hole diameter: 0.221" Housing: 1.25" long x 0.81" wide x 0.66" tall Current rating: 30 DC amp Voltage rating: 12 VDC (Voltage Direct Current) Operating temperature: -10 F to 150 F (-23 C to 65 C) Storage temperature: -20 F to 200 F (-29 C to 93 C) 1-Year limited warranty Note: 12V circuitbreakers are not recommended for 24V applications since the materials are heat-affected rather than current-affected.
Features: Metal housing with perpendicular mounting bracket 2-Piece design Attached by spot welding Cycling automatic reset Cycles continuously during over-current condition Returns to run mode when source of over-current is removed (2) 10-32 Studs Yellow, dichromate (copper color) plating on battery terminal Zinc plating (silver color) on auxiliary terminal Straight mounting bracket SAE Standard J553 compliant Specs: Applications: Accessory circuit, cooling fan, door locks, headlamps, tail lamps, window lift, sunroof, trailering package, electric brake controls Terminal dimensions: 0.66" long Current rating: 30 DC amp Voltage rating: 12 VDC (Voltage Direct Current) Operating temperature: -10 degrees F (-23 degrees C) to 150 degrees F (65 degrees C) Storage temperature: -20 degrees F (-29 degrees C) to 200 degrees F (93 degrees C) 1-Year limited warranty
In-line 40-amp Type I circuitbreaker cycles automatically and continuously during an over-current condition. Composite alloy material will bend and separate the contacts when an over-current situation occurs and return to the run mode as it cools.Features: Plastic housing with perpendicular mounting bracket 1-Piece design withstands vibration Mounting bracket is integrated into housing Lighter than metal housing Cycling automatic reset Cycles continuously during over-current condition Returns to run mode when source of over-current is removed (2) 10-32 Studs Zinc with copper plate topcoat (copper color) on battery terminal Zinc plating (silver color) on auxiliary terminal Perpendicular mounting bracket SAE Standard J553-compliant Specs: Applications: accessory circuit, cooling fan, door locks, headlamps, tail lamps, window lift, sunroof, trailering package, electric brake controls Dimensions: Overall length, including mounting bracket: 2.00" Terminals: 0.66" long; 0.69" apart Mounting bracket center to center: 1.56" Mounting bracket hole diameter: 0.23" Housing: 1.28" long x 0.84" wide x 0.72" tall Current rating: 40 DC amp Voltage rating: 12 VDC (Voltage Direct Current) Operating temperature: -10 F to 150 F (-23 C to 65 C) Storage temperature: -20 F to 200 F (-29 C to 93 C) 1-Year limited warranty Note: 12V circuitbreakers are not recommended for 24V applications since the materials are heat-affected rather than current-affected.
In-line 50-amp Type I circuitbreaker cycles automatically and continuously during an over-current condition. Composite alloy material will bend and separate the contacts when an over-current situation occurs and return to the run mode as it cools.Features: Metal housing with perpendicular mounting bracket 2-Piece design Mounting bracket attached to circuitbreaker by spot welding Cycling automatic reset Cycles continuously during over-current condition Returns to run mode when source of over-current is removed (2) 10-32 Studs Yellow, dichromate plating (copper color) on battery terminal Zinc plating (silver color) on auxiliary terminal Perpendicular mounting bracket SAE Standard J553-compliant Specs: Applications: accessory circuit, cooling fan, door locks, headlamps, tail lamps, window lift, sunroof, trailering package, electric brake controls Dimensions: Overall length, including mounting bracket: 2.00" Terminals: 0.66" long; 0.69" apart Mounting bracket center to center: 1.56" Mounting bracket hole diameter: 0.221" Housing: 1.25" long x 0.81" wide x 0.66" tall Current rating: 50 DC amp Voltage rating: 12 VDC (Voltage Direct Current) Operating temperature: -10 F to 150 F (-23 C to 65 C) Storage temperature: -20 F to 200 F (-29 C to 93 C) 1-Year limited warranty Note: 12V circuitbreakers are not recommended for 24V applications since the materials are heat-affected rather than current-affected.
Filters
