Rust-resistant assemblies let you install 2 bunk boards on your boat trailer. Swivel brackets enable bunks to tilt when loading a boat. Mounting slots allow for height adjustment. Dimpled surfaces keep brackets from sliding along the trailer frame.Features: Bolster-and-swivel bracket assemblies allow you to install 2 bunk boards on your boat trailer Dimpled bolsterbracket surfaces help prevent the brackets from sliding along the trailer frame Mounting slots permit as much as 3-3/4" of height adjustment during installation Each bolsterbracket installs vertically on your boat trailer's frame with a U-bolt (sold separately) Strong swivel brackets let you tilt the bunk boards Helps you to fit the boat hull snugly onto trailer during the loading process Hardware is included for attaching the swivel brackets to the bolsterbrackets 11-Gauge, galvanized steel resists rust and corrosion Suitable for saltwater exposure Made in the USA Specs: Quantity: 4 bracket assemblies Overall height: 9" Dimensions of bolsterbracket: 8" tall x 2-1/2" wide Mounting slot dimensions: 2-3/4" long x 1/2" wide Spacing between mounting slots: 1/2" Dimensions of swivel bracket: 3-1/2" long x 1-3/8" wide x 2" tall Flange mounting hole diameters: 3/8" Flange mounting hole spacing: 2-1/2" apart on center Bolster-and-swivel-bracket assemblies are typically mounted upright on a boat trailer's crossmembers.
... Each assembly attaches to the trailer frame with 2 U-bolts (sold separately) for a sturdy connection. Swivel brackets enable bunks to tilt when loading a boat.Features: Bolster-and-swivel-bracket assemblies allow you to install 2 bunk boards on your boat trailer Extra-sturdy connection to trailer frame ensures support for the bunk boards Each bolsterbracket attaches with 2 U-bolts (sold separately), as opposed to a standard bracket that attaches with 1 U-bolt Mounting slots permit as much as 3" of height adjustment during installation Bolsterbrackets install vertically on your boat trailer's frame Heavy-duty swivel brackets let you tilt the bunk boards Helps you to fit the boat hull snugly onto your trailer during the loading process Hardware is included for attaching the swivel brackets to the bolsterbrackets 3 Bolt holes for a strong, sturdy connection to the bunk board 7-Gauge, galvanized steel resists rust and corrosion Suitable for saltwater exposure Made in the USA Specs: Quantity: 4 bracket assemblies Overall height: 16-1/4" Dimensions of bolsterbracket: 15" tall x 4" wide Mounting slot dimensions: 3" long x 1/2" wide Horizontal spacing between slots: 1-3/4" Dimensions of swivel bracket: 3-1/2" long x 1-1/2" wide x 2" tall Flange mounting hole diameters: 3/8" Flange mounting hole spacing: 2-1/2" apart on center 1-1/4" Between each of the 3 holes Bolster-and-swivel-bracket assemblies are typically mounted upright on a boat trailer's crossmembers.
Rust-resistant assemblies let you install 2 bunk boards on your boat trailer. Swivel brackets enable bunks to tilt when loading a boat. Mounting slots allow for height adjustment. Dimpled surfaces keep brackets from sliding along the trailer frame.Features: Bolster-and-swivel bracket assemblies allow you to install 2 bunk boards on your boat trailer Dimpled bolsterbracket surfaces help prevent the brackets from sliding along the trailer frame Mounting slots permit as much as 3-3/4" of height adjustment during installation Each bolsterbracket installs vertically on your boat trailer's frame with a U-bolt (sold separately) Strong swivel brackets let you tilt the boards Helps you to fit the boat hull snugly onto trailer during the loading process Hardware is included for attaching the swivel brackets to the bolsterbrackets 11-Gauge, galvanized steel resists rust and corrosion Suitable for saltwater exposure Made in the USA Specs: Quantity: 4 bracket assemblies Overall height: 11" Dimensions of bolsterbracket: 10" tall x 2-1/2" wide Mounting slot dimensions: 3-3/4" long x 1/2" wide Spacing between mounting slots: 1/2" Dimensions of swivel bracket: 3-1/2" long x 1-3/8" wide x 2" tall Flange mounting hole diameters: 3/8" Flange mounting hole spacing: 2-1/2" apart on center Bolster-and-swivel-bracket assemblies are typically mounted upright on a boat trailer's crossmembers.
Rust-resistant assemblies let you install 2 bunk boards on your boat trailer. Swivel brackets enable bunks to tilt when loading a boat. Mounting slots allow for height adjustment. Dimpled surfaces keep brackets from sliding along the trailer frame.Features: Bolster-and-swivel bracket assemblies allow you to install 2 bunk boards on your boat trailer Dimpled bolsterbracket surfaces help prevent the brackets from sliding along the trailer frame Mounting slots permit as much as 3-3/4" of height adjustment during installation Each bolsterbracket installs on your boat trailer's frame with a U-bolt (sold separately) Strong swivel brackets let you tilt the bunk boards Helps you to fit the boat hull snugly onto trailer during the loading process Hardware is included for attaching the swivel brackets to the bolsterbrackets 11-Gauge, galvanized steel resists rust and corrosion Suitable for saltwater exposure Made in the USA Specs: Quantity: 4 bracket assemblies Overall height: 13" Dimensions of bolsterbracket: 12" tall x 2-1/2" wide Mounting slot dimensions: 4-3/4" long x 1/2" wide Spacing between mounting slots: 1/2" Dimensions of swivel bracket: 3-1/2" long x 1-3/8" wide x 2" tall Flange mounting hole diameters: 3/8" Flange mounting hole spacing: 2-1/2" apart on center Bolster-and-swivel-bracket assemblies are typically mounted upright on a boat trailer's crossmembers.
... Each assembly attaches to the trailer frame with 2 U-bolts (sold separately) for a sturdy connection. Swivel brackets enable bunks to tilt when loading a boat.Features: Bolster-and-swivel-bracket assemblies allow you to install 2 bunk boards on your boat trailer Extra-sturdy connection to trailer frame ensures support for the bunk boards Each bolsterbracket attaches with 2 U-bolts (sold separately), as opposed to a standard bracket that attaches with 1 U-bolt Mounting slots permit as much as 3" of height adjustment during installation Bolsterbrackets install vertically on your boat trailer's frame Heavy-duty swivel brackets let you tilt the bunk boards Helps you to fit the boat hull snugly onto your trailer during the loading process Hardware is included for attaching the swivel brackets to the bolsterbrackets 3 Bolt holes for a strong, sturdy connection to the bunk board 7-Gauge, galvanized steel resists rust and corrosion Suitable for saltwater exposure Made in the USA Specs: Quantity: 4 bracket assemblies Overall height: 12-1/4" Dimensions of bolsterbracket: 11-3/4" tall x 4" wide Mounting slot dimensions: 3" long x 1/2" wide Horizontal spacing between slots: 1-1/4" Horizontal spacing between slots: 1/2" Dimensions of swivel bracket: 3-1/2" long x 1-1/2" wide x 2" tall Flange mounting hole diameters: 3/8" Flange mounting hole spacing: 2-1/2" apart on center 1-1/4" Between each of the 3 holes Bolster-and-swivel-bracket assemblies are typically mounted upright on a boat trailer's crossmembers.
Mount your boat trailer's bunk board using this rust-resistant bolsterbracket, which helps support your bunk when used with a swivel bracket (sold separately). Single slot lets you adjust the bracket height. ... Features: Bolsterbracket lets you attach a swivel bracket (sold separately) for mounting a bunk board to your boat trailer 2 Brackets are required to mount 1 bunk board (additional bracket sold separately) Dimpled surface helps prevent the bracket from sliding along your trailer's frame Mounting slot lets you adjust the bracket's height during installation Bracket installs vertically on your boat trailer's frame 11-Gauge, zinc-plated steel resists rust and corrosion Made in the USA Specs: Quantity: 1 bracket Dimensions: 10-1/8" tall x 2-1/2" wide x 1" deep
Yes, you can replace the strap of the now-discontinued Fulton XLT Powered Winch F500620; I have added a diagram from the instructions which explain how to replace the strap. The winch uses a 2" wide strap and I recommend the 12' Long…
So the U-Bolt will secure the CE Smith Light Duty, Vertical Bunk Bracket #CE10603G with the ends pointing towards the back of the trailer. If you look at the picture you took it looks like those fasteners holding your current brackets could be…
We can get you a replacement for your TDE LP75 disc brake actuator; that's a 7,500 lb actuator that accepts a 2" hitch ball, and the correct option will depend on if your trailer tongue is 3" wide x 4" tall or 3" wide x…
Sounds like you are looking for the Malone Crossbar Conversion Kit part #MPG475. This allows you to convert a standard utility trailer to having a set of Malone Crossbars which you could then use a Malone kayak carrier like the #MPG107MD on.
I checked with Malone about the Malone Crossbar Conversion Kit for Standard Utility Trailer part #MPG475 and confirmed the weight capacity as 400 lbs evenly distributed.
My contact at Fulton tells me that they don't offer a replacement strap for the discontinued Fulton 500621 electric winch, but I found that the winch uses a 2 inch wide strap and fastens to the winch spool using a bolt that passes through a loop…
The Malone Crossbar Conversion Kit for Standard Utility Trailer #MPG475 that you referenced has the weight capacity of the Malone crossbars that come with the kit of 400 lb.
Either one is fine to do. With the Fulton Hi-Mount Spare Tire Carrier part #FSTC1000301 you are not going to be adding a great deal of width to your trailer so the difference is minimum. Giving you my opinion since there is no rule I would Choose the…
The Reese part number 94920 is our part number #RP85FR. We change the part number in our systems but I assure you it's the exact same. This does fit your 2023 Keystone Cougar 24RDS.
Hey Jeff. The CE Smith Bolster and Swivel Bracket Assemblies item #CE10000G-4 are going to need a 3-1/16" wide on the inside u-bolt that has threads that go down to at least 1-1/2" from the inside of the bolt. The 3-13/16" Long x…
Carlisle and Kenda trailer tires are about the same in terms of quality. We only sell Kenda currently so I'll try not to give you too much bias...but the Kenda Karrier S-Trail ST145/R12 Radial Trailer Tire #AM10130 that you referenced is very…
Rust-resistant assemblies let you install 2 roller bunks on your boat trailer. Swivel brackets enable bunks to tilt when loading a boat. Mounting slots allow for height adjustment. Dimpled surfaces keep brackets from sliding along the trailer frame.Features: Bolster-and-swivel bracket assemblies allows you to install 2 roller bunks on your boat trailer Dimpled bolsterbracket surfaces help prevent the brackets from sliding along the trailer frame Mounting slots permit as much as 3-3/4" of height adjustment during installation Each bolsterbracket installs on your boat trailer's frame with a single U-bolt (sold separately) Strong swivel brackets let you tilt the roller bunks Helps you to fit the boat hull snugly onto trailer during the loading process Hardware is included for attaching the swivel brackets to the bolsterbrackets 11-Gauge, galvanized steel resists rust and corrosion Suitable for saltwater exposure Made in the USA Specs: Quantity: 4 bracket assemblies Overall height: 11" Dimensions of bolsterbracket: 10" tall x 2-1/2" wide Mounting slot dimensions: 3-3/4" long x 1/2" wide Spacing between mounting slots: 1/2" Dimensions of swivel bracket: 1-1/4" long x 1-3/4" wide x 2" tall Top flange mounting hole diameter: 7/16" Bolster-and-swivel-bracket assemblies are typically mounted upright on a boat trailer's crossmembers.
Rub marks, squeaks, or crooked loading? A swivel bolster lets you pivot your bunk so it sits flush to your hull. You set the height, it spreads the boat's contact, and you'll load your boat smoother while protecting it's finish.Features to know about Centered, Scuff-Free Loading When a boat loads crooked or rubs the same spot every trip, it's usually a bunk alignment issue, not the hull. Swivel bolsterbrackets let you adjust your bunk boards to where they should be, so the hull sits right and loading feels smooth. The 2-3/4" vertical slot gives you the wiggle room to dial in bunk height for your boat, and the non-slip dimples bite into the board to prevent movement and boost load capacity.
This rust-resistant bolsterbracket attaches to your boat trailer's frame with 2 U-bolts (sold separately) to ensure a sturdy connection to the trailer. ... Features: Bolsterbracket lets you attach a swivel bracket (sold separately) for mounting a bunk board to your boat trailer 2 Brackets are required per bunk board (additional bracket sold separately) Extra-sturdy connection to trailer frame ensures support for the bunk board Bracket attaches with 2 U-bolts (sold separately), as opposed to a standard bracket that attaches with 1 U-bolt Mounting slots permit as much as 3" of height adjustment during installation Bracket installs vertically on your boat trailer's frame 7-Gauge, galvanized steel resists rust and corrosion Suitable for saltwater exposure Made in the USA Specs: Quantity: 1 bracket Overall dimensions: 15" tall x 4" wide Mounting slot dimensions: 3" long x 1/2" wide Horizontal spacing between slots: 1-3/4" Swivel bracket mounting hole diameter: 1/2" Bolsterbrackets are typically mounted upright on a boat trailer's crossmembers.
Rub marks, squeaks, or crooked loading? A swivel bolster lets you pivot your bunk so it sits flush to your hull. You set the height, it spreads the boat's contact, and you'll load your boat smoother while protecting it's finish.Ready to Install: Includes mounting hardware for a straightforward setup. Features to know about Centered, Scuff-Free Loading Swivel bolsterbrackets let you adjust your bunk boards to where they should be, so the hull sits right and loading feels smooth. The 2-3/4" vertical slot gives you the wiggle room to dial in bunk height for your boat, and the non-slip dimples bite into the board to prevent movement and boost load capacity.
V-wing bolsterbracket supports the bunks on your pontoon boat trailer. Short bracket wings and deep cradle are great for narrow pontoons. Galvanized steel material is ideal for saltwater use.Features: Heavy-duty bracket allows you to mount 2 bunk boards on your pontoon boat trailer Mounts on your boat trailer's frame or crossmember Stabilizes bunk boards when at least 2 brackets are used (other bracket sold separately) Short bracket wings surround and stabilize narrow pontoons Deep cradle keeps your boat's pontoons from jostling side-to-side Slotted mounting hole allows for easy adjustment along frame during installation 11-Gauge, galvanized steel construction is sturdy and corrosion resistant Mounting hardware sold separately Made in the USA Specs: Quantity: 1 bracket Application: 4" wide bunk boards Maximum length: 11-3/4" Base length: 8-1/2" Maximum height: 5-1/8" Galvanized Steel Galvanized steel parts are hot-dipped in zinc after being stamped.
Rub marks, squeaks, or crooked loading? A swivel bolster adds a little pivot so the bunk sits flush to your hull. You set the height, it spreads the boat's contact, and you'll load your boat smoother while protecting it's finish.Use one to replace a failed bracket, or grab a set and reset your bunks so loading feels smooth and predictable again. Specs Application Quantity: 1 bracket Dimensions and Weight Overall dimensions: 10" long x 2-1/2" wide x 1" tall Slot length: 2-3/4" Weight: 1.31 lbs Material Material: galvanized steel Color: silver General Warranty: 1-year limited
This rustproof bolsterbracket helps support 1 bunk board on your boat trailer when used with a swivel bracket (sold separately). Mounting slots allow for height adjustment. ... Features: Bolsterbracket lets you attach a swivel bracket (sold separately) for mounting a bunk board on your boat trailer 2 Brackets are required per bunk board (additional bracket sold separately) Dimpled surface helps prevent the bracket from sliding along the trailer frame Mounting slots permit as much as 2-3/4" of height adjustment during installation Bracket installs vertically on your boat trailer's frame with a U-bolt (sold separately) Lightweight aluminum is rustproof and corrosion resistant Great for freshwater and saltwater use Made in the USA Specs: Quantity: 1 bracket Overall dimensions: 8" tall x 2-1/2" wide Mounting slot dimensions: 2-3/4" long x 1/2" wide Spacing between mounting slots: 1/2" Swivel bracket mounting hole diameter: 1/2" Bolsterbrackets are typically mounted upright on a boat trailer's crossmembers.
This rust-resistant assembly helps support 1 bunk board on your boat trailer. Swivel bracket enables board to tilt when loading a boat. Mounting slots allow for height adjustment. Dimpled surface keeps bracket from sliding along trailer frame.Features: Bolster-and-swivel bracket assembly lets you mount a bunk board on your boat trailer Stabilizes one end of the bunk board - additional bracket assembly (sold separately) required for opposite end of board Dimpled bolsterbracket surface helps prevent the bracket from sliding along the trailer frame Mounting slots permit as much as 3-3/4" of height adjustment during installation Bracket installs vertically on your boat trailer's frame with a U-bolt (sold separately) Strong swivel bracket lets you tilt the bunk board Helps you to fit the boat hull snugly onto trailer during the loading process Hardware is included for attaching the swivel bracket to the bolsterbracket 11-Gauge, galvanized steel resists rust and corrosion Suitable for saltwater exposure Made in the USA Specs: Quantity: 1 bracket assembly Overall height: 13" Dimensions of bolsterbracket: 12" tall x 2-1/2" wide Mounting slot dimensions: 4-3/4" long x 1/2" wide Spacing between mounting slots: 1/2" Dimensions of swivel bracket: 3-1/2" long x 1-3/8" wide x 2" tall Flange mounting hole diameters: 3/8" Flange mounting hole spacing: 2-1/2" apart on center Bolster-and-swivel-bracket assemblies are typically mounted upright on a boat trailer's crossmembers.
This rust-resistant assembly helps support 1 bunk board on your boat trailer. Swivel bracket enables board to tilt when loading a boat. Mounting slots allow for height adjustment. Dimpled surface keeps bracket from sliding along trailer frame.Features: Bolster-and-swivel bracket assembly lets you mount a bunk board on your boat trailer Stabilizes one end of the bunk board - additional bracket assembly (sold separately) required for opposite end of board Dimpled bolsterbracket surface helps prevent the bracket from sliding along the trailer frame Mounting slots permit as much as 3-3/4" of height adjustment during installation Bracket installs vertically on your boat trailer's frame with a U-bolt (sold separately) Strong swivel bracket lets you tilt the bunk board Helps you to fit the boat hull snugly onto trailer during the loading process Hardware is included for attaching the swivel bracket to the bolsterbracket 11-Gauge, galvanized steel resists rust and corrosion Suitable for saltwater exposure Made in the USA Specs: Quantity: 1 bracket assembly Overall height: 9" Dimensions of bolsterbracket: 8" tall x 2-1/2" wide Mounting slot dimensions: 2-3/4" long x 1/2" wide Spacing between mounting slots: 1/2" Dimensions of swivel bracket: 3-1/2" long x 1-3/8" wide x 2" tall Flange mounting hole diameters: 3/8" Flange mounting hole spacing: 2-1/2" apart on center Bolster-and-swivel-bracket assemblies are typically mounted upright on a boat trailer's crossmembers.
This rust-resistant bolsterbracket helps support 1 bunk board on your boat trailer when used with a swivel bracket (sold separately). Mounting slots allow for height adjustment. ... Features: Bolsterbracket lets you attach a swivel bracket (sold separately) for mounting a bunk board to your boat trailer 2 Brackets are required per bunk board (additional bracket sold separately) Dimpled surface helps prevent the bracket from sliding along the trailer frame Mounting slots permit as much as 4-3/4" of height adjustment during installation Bracket installs vertically on your boat trailer's frame with a U-bolt (sold separately) 11-Gauge, galvanized steel resists rust and corrosion Suitable for saltwater exposure Made in the USA Specs: Quantity: 1 bracket Overall dimensions: 12" tall x 2-1/2" wide Mounting slot dimensions: 4-3/4" long x 1/2" wide Spacing between mounting slots: 1/2" Swivel bracket mounting hole diameter: 1/2" Bolsterbrackets are typically mounted upright on a boat trailer's crossmembers.
... Each assembly attaches to the trailer frame with 2 U-bolts (sold separately) for a sturdy connection. Swivel brackets enable bunks to tilt when loading a boat.Features: Bolster-and-swivel-bracket assemblies allow you to install 2 bunk boards on your boat trailer Extra-sturdy connection to trailer frame ensures support for the bunk boards Each bolsterbracket attaches with 2 U-bolts (sold separately), as opposed to a standard bracket that attaches with 1 U-bolt Mounting slots permit as much as 3" of height adjustment during installation Bolsterbrackets install vertically on your boat trailer's frame Heavy-duty swivel brackets let you tilt the bunk boards Helps you to fit the boat hull snugly onto your trailer during the loading process Hardware is included for attaching the swivel brackets to the bolsterbrackets 3 Bolt holes allow for a strong, sturdy connection to the bunk board 7-Gauge, galvanized steel resists rust and corrosion Suitable for saltwater exposure Made in the USA Specs: Quantity: 4 bracket assemblies Overall height: 10-1/4" Dimensions of bolsterbracket: 9-3/4" tall x 4" wide Mounting slot dimensions: 3" long x 1/2" wide Horizontal spacing between slots: 1-1/4" Vertical spacing between slots: 1/2" Dimensions of swivel bracket: 3-1/2" long x 1-1/2" wide x 2" tall Flange mounting hole diameters: 3/8" Flange mounting hole spacing: 2-1/2" apart on center 1-1/4" Between each of the 3 holes Bolster-and-swivel-bracket assemblies are typically mounted upright on a boat trailer's crossmembers.
This bolsterbracket supports your pontoon boat trailer's bunks. Constructed of corrosion-resistant galvanized steel with a sturdy base, it helps you to properly align your 6" or 8" wide bunk boards on your trailer.Features: Heavy-duty bracket mounts to your pontoon boat trailer's frame or crossmembers and allows you to mount 2 bunk boards Stabilizes bunk boards when 2 brackets are used (other bracket sold separately) Does not include mounting hardware Wide base provides a strong mounting platform Slotted mounting hole allows for adjustment during installation 1/8" Thick, galvanized steel construction is sturdy and resists corrosion Made in USA Specs: Quantity: 1 bracket Application: 6" and 8" wide bunk boards Dimensions: 15-1/2" long x 3" wide x 6" tall Mounting slot dimensions: 7-1/2" long x 1/2" wide This bracket holds two 2"x6" or 2"x8" bunk boards angled toward each other to provide support for one of the boat's pontoons.
This rust-resistant assembly helps support 1 bunk board on your boat trailer. Swivel bracket enables board to tilt when loading a boat. Mounting slots allow for height adjustment. Dimpled surface keeps bracket from sliding along trailer frame.Features: Bolster-and-swivel bracket assembly lets you mount a bunk board on your boat trailer Stabilizes one end of the bunk board - additional bracket assembly (sold separately) required for opposite end of board Dimpled bolsterbracket surface helps prevent the bracket from sliding along the trailer frame Mounting slots permit as much as 3-3/4" of height adjustment during installation Bracket installs vertically on your boat trailer's frame with a U-bolt (sold separately) Strong swivel bracket lets you tilt the bunk board Helps you to fit the boat hull snugly onto trailer during the loading process Hardware is included for attaching the swivel bracket to the bolsterbracket 11-Gauge, galvanized steel resists rust and corrosion Suitable for saltwater exposure Made in the USA Specs: Quantity: 1 bracket assembly Overall height: 11" Dimensions of bolsterbracket: 10" tall x 2-1/2" wide Mounting slot dimensions: 3-3/4" long x 1/2" wide Spacing between mounting slots: 1/2" Dimensions of swivel bracket: 3-1/2" long x 1-3/8" wide x 2" tall Flange mounting hole diameters: 3/8" Flange mounting hole spacing: 2-1/2" apart on center Bolster-and-swivel-bracket assemblies are typically mounted upright on a boat trailer's crossmembers.
If your bunk brackets are rusted, bent, cracked, or no longer keeping your bunks aligned and tight, it's time for new ones. This will make sure your boat sits square, loads smoothly, and you're not risking hull damage or a failed support.Made for the Ramp: Hot-dip galvanized steel holds up to spray, rain, and road grit in harsh marine use. Sold Individually: Includes 1 bracket; top hardware not included. Specs Application Quantity: 1 bracket Hardware not included Dimensions and Weight Overall dimensions: 10" long x 2-1/2" wide x 1" tall Slot length: 2-3/4" Weight: 1.31 lbs Material Material: galvanized steel Color: silver General Warranty: 1-year limited Made in the USA
This rust-resistant bolsterbracket helps support 1 bunk board on your boat trailer when used with a swivel bracket (sold separately). Mounting slots allow for height adjustment. ... Features: Bolsterbracket lets you attach a swivel bracket (sold separately) for mounting a bunk board to your boat trailer 2 Brackets are required per bunk board (additional bracket sold separately) Dimpled surface helps prevent the bracket from sliding along the trailer frame Mounting slots permit as much as 2-3/4" of height adjustment during installation Bracket installs vertically on your boat trailer's frame with a U-bolt (sold separately) 11-Gauge, galvanized steel resists rust and corrosion Suitable for saltwater exposure Made in the USA Specs: Quantity: 1 bracket Overall dimensions: 8" tall x 2-1/2" wide Mounting slot dimensions: 2-3/4" long x 1/2" wide Spacing between mounting slots: 1/2" Swivel bracket mounting hole diameter: 1/2" Bolsterbrackets are typically mounted upright on a boat trailer's crossmembers.
Mount your boat trailer's bunk board using this rust-resistant bolsterbracket, which helps support your bunk when used with a swivel bracket (sold separately). Single slot lets you adjust the bracket height. ... Features: Bolsterbracket lets you attach a swivel bracket (sold separately) for mounting a bunk board to your boat trailer 2 Brackets are required to mount 1 bunk board (additional bracket sold separately) Dimpled surface helps prevent the bracket from sliding along your trailer's frame Mounting slot lets you adjust the bracket's height during installation Bracket installs vertically on your boat trailer's frame 11-Gauge, zinc-plated steel resists rust and corrosion Made in the USA Specs: Quantity: 1 bracket Dimensions: 8" tall x 2-1/2" wide x 1" thick
This rust-resistant bolsterbracket helps support 1 bunk board on your boat trailer when used with a swivel bracket (sold separately). Mounting slots allow for height adjustment. ... Features: Bolsterbracket lets you attach a swivel bracket (sold separately) for mounting a bunk board to your boat trailer 2 Brackets are required per bunk board (additional bracket sold separately) Dimpled surface helps prevent the bracket from sliding along the trailer frame Mounting slots permit as much as 3-3/4" of height adjustment during installation Bracket installs vertically on your boat trailer's frame with a U-bolt (sold separately) 11-Gauge, galvanized steel resists rust and corrosion Suitable for saltwater exposure Made in the USA Specs: Quantity: 1 bracket Overall dimensions: 10" tall x 2-1/2" wide Mounting slot dimensions: 3-3/4" long x 1/2" wide Spacing between mounting slots: 1/2" Swivel bracket mounting hole diameter: 1/2" Bolsterbrackets are typically mounted upright on a boat trailer's crossmembers.
If your bunk brackets are rusted, bent, cracked, or no longer keeping your bunks aligned and tight, it's time for new ones. This will make sure your boat sits square, loads smoothly, and you're not risking hull damage or a failed support.Made for the Ramp: Hot-dip galvanized steel holds up to spray, rain, and road grit in harsh marine use. Sold Individually: Includes 1 bracket for setup; hardware not included so you can customize your install. Specs Application Quantity: 1 bracket Hardware not included Dimensions & Weight Overall dimensions: 12" long x 2-1/2" wide x 1" tall Slot length: 2-3/4" Weight: 1.64 lbs Material Material: galvanized steel Color: silver General Warranty: 1-year limited Made in the USA
Filters
