... the axle.Features: Welds onto round, 3" diameter axle (typical 5,200-lb to 7,200-lb axle) Works with 1-3/4" or 2" wide spring Cutout on flat side of seat surrounds raised knob on leaf spring to
Stop worrying about rusted trailer parts after trips to the boat ramp or long days in the rain. This galvanized spring seat welds to your 2" square axle and fits 1-3/4" or 2" springs ... Highlights Secure Axle Support: Welds onto a square, 2" axle (typical 3,500-lb axle) to keep your trailers springs in place. Versatile Fit: Works with 1-3/4" or 2" wide leaf springs
... the axle.Features: Welds onto round, 2-3/8" diameter axle (typical 3,500-lb axle) Works with 1-3/4" or 2" wide spring Cutout on flat side of seat surrounds raised knob on leaf spring to prevent
Moves your trailer's leaf springs to the top of your axle with this kit. For 2-3/8" diameter axles and works with double-eye leaf springs only.Features: Fits 2-3/8" axle Allows moving trailer leaf springs to top of axle For use with double-eye springs only Sleeve bolts allow the setup to install level Includes: (2) Spring Seat (8) Nut
Mount your round, 3" diameter axle to your trailer's leaf springs with this U-bolt kit. U-bolts, plates and nuts included.Features: Attaches trailer axle to leaf springs Includes: (4) 7" Long U-bolts (1755892) (2) U-Bolt plates for 1-3/4" springs (TP-3000175) (8) 1/2"-20 Hex nuts (12N) Spring seats
Improves suspension, handling and safety. Progressive spring rate. Provides additional support as needed so you always have a smooth, comfortable ride. included Maintenance-free - no tubing to run or air pressure to monitor like with air springs Simple, no-drill installation Made in the USA Specs: Application: 3,000-lb to 5,000-lb single, overslung axle -
The most popular trailer wheel bolt pattern is the 5 on 4-1/2 inch bolt pattern and as far as we are aware the bolt pattern you mentioned is not used on trailers at all. So my bet is you probably have the 5 on 4-1/2 inch. I attached a help article…
Yes, there is a measurement you can take to determine what size brakes you need and if they will fit your existing drums. You will want to measure the diameter of your drums. I have included a diagram detailing the dimensions you will need to find.…
There really is a wide range of axles that could potentially be on this trailer. We carry hubs with 8 on 6-1/2" bolt patterns that can be used on axles anywhere from 5200-lbs capacity, like the #8-219-4UC3-EZ all the way up to 12000-lbs like the…
You can figure exactly where to position your axles as well as the wheel base by simply plugging some numbers into the handy chart I've added for you. This will tell you where the axles need to go and thus, what the wheel base will be. I have…
Both the Equa-Flex Cushioned Equalizers - Double Eye Springs like #LC279687 and the E-Z Flex Heavy Duty Rubber Suspension System like the #K71-653-00 will provide an upgrade over the standard cast equalizers that most likely came on your trailer.…
If the bearing numbers are the same as what you have currently in your Reliable R1001 hub the Dexter hub part #84545BX would be the correct replacement. We don't have a cross reference for that brand of hub but if the bearing numbers match this…
The recommended clearance with leaf spring suspension on an unloaded trailer is between 2 - 2-1/2 inches. You should have sufficient clearance with your loaded trailer, as leaf springs only tend to deflect 1-1/2 inch when carrying a load.
Hey Steven, for a shackle bolt to use with the etrailer leaf spring #e27SR we have the part #126B2 which would work great. It's correct size and has a grease fitting for easier greasing. Do you have everything else needed?
The brake assemblies you have are 7k Dexter assemblies that are 12 inch by 2 inch in size. The part number #AKEBRK-7-SA will work as a great replacement set. This includes assemblies for both sides of your trailer that are self adjusting.
If you have a trailer wheel that has a 6 lug setup you are going to have a bolt pattern of 6 on 5-1/2 inches. This is the standard 6 lug wheel bolt pattern that trailer rims have. If you are unsure you can check out the help article I attached that…
Generally speaking, the heavier the spring rate the rougher the ride will be when unloaded. That is the sacrifice that gets made when you go to a spring that will allow you to have a higher towing capacity. If you are concerned about ride quality and…
Improves suspension, handling and safety. Progressive spring rate. Provides additional support as needed so you always have a smooth, comfortable ride. included Maintenance-free - no tubing to run or air pressure to monitor like with air springs Simple, no-drill installation Made in the USA Specs: Application: 3,000-lb to 5,000-lb single, underslung axle -
Improves suspension, handling and safety. Progressive spring rate. Provides additional support as needed so you always have a smooth, comfortable ride. included Maintenance-free - no tubing to run or air pressure to monitor like with air springs Simple, no-drill installation Made in the USA Specs: Application: 5,000-lb to 8,000-lb single, overslung axle -
Improves suspension, handling and safety. Progressive spring rate. Provides additional support as needed so you always have a smooth, comfortable ride. included Maintenance-free - no tubing to run or air pressure to monitor like with air springs Simple, no-drill installation Made in the USA Specs: Application: 5,000-lb to 8,000-lb single, underslung axle -
You're setting up a tandem-axle trailer and want the suspension to do its job. You weld the hangers, bolt in the equalizers, and the springs drop into place. It flexes like it should and tracks ... Highlights For Double-Eye Springs: Mounts 1-3/4" wide springs to tandem-axle trailer frame. Supports Multiple Weights: Use with 2,000-lb to 7,000-lb trailer axles. Full Kit Included: Comes with
You're swapping to slipper springs and want a setup that'll hold up. You weld the tall front hangers, set the rears, and the springs lock in without a fight. The axle sits right, and the ... Highlights For Slipper Springs: Fits 2" wide slipper leaf springs on tandem-axle trailers. Built for Strength: Ideal for utility, cargo, and heavy-duty trailer builds. 3-3/4" Front Hangers
You're rebuilding the trailer suspension and need a clean start. You weld the hangers, bolt up the shackles, and the new springs drop right in. Everything's square and the axle tracks true.Highlights For Double-Eye Springs: Mounts 1-3/4" wide springs to single-axle trailer frame. Supports Multiple Weights: Use with 2,000-lb to 7,000-lb trailer axles. Full Kit Included: Comes with
You're setting up a tandem-axle trailer and want the suspension to do its job. You weld the hangers, bolt in the equalizers, and the springs drop into place. It flexes like it should and tracks ... Highlights For Double-Eye Springs: Mounts 1-3/4" wide springs to tandem-axle trailer frame. Equalized Suspension: Kit includes equalizers for smoother towing over rough roads. Full Kit Included
You're rebuilding the trailer suspension and need a clean start. You weld the hangers, bolt up the shackles, and the new springs drop right in. Everything's square and the axle tracks true.Highlights For Double-Eye Springs: Mounts 1-3/4" wide springs to single-axle trailer frame. Supports Multiple Weights: Use with 2,000-lb to 7,000-lb trailer axles. Full Kit Included: Comes with
Leaf-spring mounting kit includes 5" tall front hangers, 4-1/2" tall center hangers, 6-3/8" tall rear hangers and hardware. Equalizers are 13-1/8" long. Designed for use with ... ; Diameter locknuts (6-112) Designed for use on trailers with tandem, 9,000-lb Dexter axles Does not include components for mounting axle to springsAxle Capacity A - Distance Between Front and Center Hangers
Leaf-spring mounting kit includes 5" tall front hangers, 4-1/2" tall center hangers, 6-3/8" tall rear hangers and hardware. Equalizers are 13-1/8" long. Designed for use with ... ; Diameter locknuts (6-112) Designed for use on trailers with tandem, 9,000-lb Dexter axles Does not include components for mounting axle to springsAxle Capacity A - Distance Between Front and Center Hangers
Leaf-spring mounting kit includes 6-1/4" tall front hangers, 6-1/2" tall center hangers, 7-11/16" tall rear hangers and hardware. Equalizers are 14-1/4" long. Designed for use ... ) 1-1/8" Diameter locknuts (6-72) Designed for use on trailers with tandem, 10,000-lb to 15,000-lb, heavy-duty Dexter axles Does not include components for mounting axle to springsAxle Capacity A -
Leaf-spring mounting kit includes 5-1/4" tall front hangers, 4-1/2" tall center hangers, 4-1/2" tall rear hangers and hardware. Equalizers are 24-5/8" long. Designed for use with ... include components for mounting axle to springsAxle Capacity A - Distance Between Front and Center Hangers B - Distance Between U-Bolts C - Distance Between Center and Rear Hangers D - Distance Between
Leaf-spring mounting kit includes 6-1/4" tall front hangers, 6-1/2" tall center hangers, 7-11/16" tall rear hangers and hardware. Equalizers are 24-3/4" long. Designed for use ... ) 1-1/8" Diameter locknuts (6-72) Designed for use on trailers with tandem, 10,000-lb to 15,000-lb, heavy-duty Dexter axles Does not include components for mounting axle to springsAxle Capacity A -
Leaf-spring mounting kit includes 5-1/4" tall front hangers, 4-1/2" tall center hangers, 4-1/2" tall rear hangers and hardware. Equalizers are 18-3/8" long. Designed for use with ... include components for mounting axle to springsAxle Capacity A - Distance Between Front and Center Hangers B - Distance Between U-Bolts C - Distance Between Center and Rear Hangers D - Distance Between
Leaf-spring mounting kit includes 5" tall front hangers, 4-1/2" tall center hangers, 6-3/8" tall rear hangers and hardware. Equalizers are 17-3/8" long. Designed for use with ... ) 1" Diameter locknuts (6-112) Designed for use on trailers with tandem, 9,000-lb Dexter axles Does not include components for mounting axle to springsAxle Capacity A - Distance Between Front and
Leaf-spring mounting kit includes 5-1/4" tall front hangers, 4-1/2" tall center hangers, 4-1/2" tall rear hangers and hardware. Equalizers are 14-1/4" long. Designed for use with ... components for mounting axle to springsAxle Capacity A - Distance Between Front and Center Hangers B - Distance Between U-Bolts C - Distance Between Center and Rear Hangers D - Distance Between Center of Axle
Leaf-spring mounting kit includes 6-1/4" tall front hangers, 6-1/2" tall center hangers, 7-11/16" tall rear hangers and hardware. Equalizers are 18-3/8" long. Designed for use ... ) 1-1/8" Diameter locknuts (6-72) Designed for use on trailers with tandem, 10,000-lb to 15,000-lb, heavy-duty Dexter axles Does not include components for mounting axle to springsAxle Capacity A -
Suspension kit includes equalizers and hardware for attaching 4 leaf springs to the hangers on your trailer's frame. Works with 33" axle spacing. impacts from one axle to another by permitting movement between the axlesSprings attach to ends of equalizers with included hardware Bolts secure equalizers and springs to the hangers on your trailer
Filters
