You're on the highway when a strong crosswind hits and your trailer starts to sway. It's the kind of trouble that's flipped plenty of rigs. These rubber springs absorb that shove, keeping the trailer steady and your truck in control.Why Doesn't This System Need Maintenance? These brackets mount above the axle and hold the rubber springs in place. Once everything's in place and torqued down, there's nothing to adjust or keep up with.
Moves your trailer's leaf springs to the top of your axle with this kit. For 2-3/8" diameter axles and works with double-eye leaf springs only.Features: Fits 2-3/8" axle Allows moving trailer leaf springs to top of axle For use with double-eye springs only Sleeve bolts allow the setup to install level Will fit up to 1-5/8" wide leaf springs Includes: (2) Spring Seat (8) Nut (4) U-Bolt (2) Tie Plate 4 Nut couplings U-bolt length: 5-1/8"
Moves your trailer's leaf springs to the top of your axle. Works with 3" diameter axles and double-eye leaf springs only.Features: Allows moving leaf trailer springs to top of axle For use with double-eye springs only Fits 3" axle Sleeve bolts allow the setup to install level Includes: (2) Spring Seats (8) 1/2" Nuts (4) Steel spacer nuts (4) 7" Long x 4-1/16" wide x 1/2" diameter U-Bolts (2) Tie Plates
You're on the highway when a strong crosswind hits and your trailer starts to sway. It's the kind of trouble that's flipped plenty of rigs. These rubber springs absorb that shove, keeping the trailer steady and your truck in control.Specs Application: RV trailers with an underslung suspension with leaf spring pack width less than 2-1/4" Dimensions and Weight Capacity: Distance between 2 parallel U-bolts (outside to outside): Less than 3-1/4" Axle diameter range: 2-3/8" to 3" Overall kit height: 6-3/4" Weight capacity: 7,000 lbs Construction and Warranty: Construction: powder coated steel Warranty: limited lifetime Note: Even though you're increasing the spring rate by adding this upgrade, this does not increase the trailer's GTW (Gross Trailer Weight).
Flats happen fast. This side mount carrier keeps your spare on the tongue where you can grab it quickly. The hot-dip galvanized finish keeps the hardware from seizing up so the swap is quick and you're back on the road.Others stick it on the rear crossmember, which adds weight behind the axle and makes the spare harder to reach once the boat's loaded. A side-mounted carrier solves both problems. It keeps the spare out of the way, but still easy to grab when you need it, and it doesn't eat into your trailer's deck space.
Flats happen fast. This side mount carrier keeps your spare on the tongue where you can grab it quick. Heavy steel with a zinc finish holds it tight, even around saltwater, so your spare is ready when you need it most.Others stick it on the rear crossmember, which adds weight behind the axle and makes the spare harder to reach once the boat's loaded. A side-mounted carrier solves both problems. It keeps the spare out of the way, but still easy to grab when you need it, and it doesn't eat into your trailer's deck space.
Hey Stephen. All you should need to do to flip a 2" square axle is to use the CE Smith U-Bolt Kit for Mounting 2" Square Trailer Axles item #CE23103. You'll be able to reorientate your axle below your springs with this setup. This kit…
Hey Marty, thanks for reaching out. Yes, we do carry an over-under kit for a 2-3/8" diameter axle. For that you can use the following: - Dexter Trailer Springs Over-Under Conversion Kit #K71-384-00 This will lift the trailer the diameter of the…
The dimensions I found for your Dometic RM1350 on Dometic's site show it being 64.26" T x 33.69" W x 29.50" D. the closest match to these dimensions we carry is the Everchill RV Refrigerator w/ Freezer Drawer - 16 Cu Ft - 12V -…
Using a leaf spring with a capacity higher than what the manufacturer of your trailer recommends will cause a very stiff and rough ride. A higher rated leaf spring pack is not what I would recommend to increase ground clearance. In order to retain…
As far as ride quality goes it would be challenging to feel a difference between the Road Armor and MORryde Cushioned Equalizers like part #MR27ZR. I like how heavy duty the MORryde equalizers are made though so since ride quality would be about same…
To determine the correct length shackle straps it is best to compare your current equalizer to the Road Armor Shock Absorbing Equalizer #LC696740 that you installed on your 2021 Keystone Cougar 22MLS. A basic Equalizer #AP233 that comes on your size…
Hey Caleb, so generally what you see is that on lower capacity trailers the wheelbase between the axles is 33 inches and above like 6k or so the wheelbase most commonly seen is 35 inches. This just works out the easiest and corresponds with how most…
In order to replace the shackles in your suspension setup you'll want to measure your old ones from bolt hole center to bolt hole center; they can stretch out a bit over time so you'll want to choose the closest match to your existing ones…
Thank you for providing that picture and helpful information. The correct lift kit for a 3,000 lb Dexter #10 torsion axle like yours is the #K71-707-01. This comes with all of the necessary hardware and will give you a 2-5/8" lift.
If your Forest River Mini-Lite 1906 has a single torsion axle, you will be able to use the Axle Riser Kit- Single Square Torsion Axles #LC382741; however, if you have a Dexter Torflex #10 axle, you need the #K71-707-01. You'll want to check the…
The Dexter Trailer Springs Over-Under Conversion Kit #K71-384-00 will work with your 2021 Forest River Gray Wolf 26DBH travel trailer as long as you have underslung double eye leaf springs and 2-3/8" diameter axles. If you have 3" axles…
Hi Bruce, To lift your trailer we'll first need to check of the suspension and see if you have torsion axles or a leaf spring suspension. If you have torsion axles then I'll need to see the axle tag in order to determine what you have so I…
Eliminate the need for blocks or hard-to-position jack foot extensions with this unique, flip-up jack foot. No pins or clips to secure. Foot wedges into place quickly and easily, and it automatically folds up beneath trailer frame when not in use.If the outer tube is less than 10" from the ground, then use a flip-up jack with a 4" extension (FA88-00-4500 - sold separately) instead.
Eliminate the need for blocks or hard-to-position jack foot extensions with this unique, flip-up jack foot. No pins or clips to secure. Foot wedges into place quickly and easily, and it automatically folds up beneath trailer frame when not in use.If the outer tube is more than 10" from the ground, then use a flip-up jack with a 6" extension (FA88-00-6500 - sold separately) instead.
... Adjustable mounting brackets and hardware included. Fits 3-1/2" axles.Features: Heavy-duty gas shocks absorb road vibration to provide a more comfortable towing experience Nitrogen-charged shock absorbers help to eliminate trailer bouncing, chucking, and porpoising Adjustable mounting brackets allow the shocks to be positioned nearly vertically Limits up-and-down motion of trailer on both compression and rebound Shocks sit at an outward, 15-degree angle Helps to control trailer sway by limiting lateral movement Improves front-to-back, side-to-side, and up-and-down movement of your trailer Bolt-on installation Included tie plates with extension pieces replace your existing U-bolt plates Upper brackets mount on trailer frame with included hardware Shocks attach to tie plate extensions and to upper brackets to help dampen movement of axle Specs: Application: tandem-axle trailers with leaf spring suspensions Axle size: 3-1/2" diameter (typical 8,000-lb axle) Shock length: Extended: 17-1/2" Compressed: 11-1/2" Quantity: 4 shocks Limited Lifetime Warranty This Comfort Ride suspension upgrade system greatly improves your towing experience.
... Adjustable mounting brackets and hardware included. Fits 2-3/8" axles.Features: Heavy-duty gas shocks absorb road vibration to provide a more comfortable towing experience Nitrogen-charged shock absorbers help to eliminate trailer bouncing, chucking, and porpoising Adjustable mounting brackets allow the shocks to be positioned nearly vertically Limits up-and-down motion of trailer on both compression and rebound Shocks sit at an outward, 15-degree angle Helps to control trailer sway by limiting lateral movement Improves front-to-back, side-to-side, and up-and-down movement of your trailer Bolt-on installation Included tie plates with extension pieces replace your existing U-bolt plates Upper brackets mount on trailer frame with included hardware Shocks attach to tie plate extensions and to upper brackets to help dampen movement of axle Specs: Application: tandem-axle trailers with leaf spring suspensions Axle size: 2-3/8" diameter (typical 3,500-lb axle) Shock length: Extended: 17-1/2" Compressed: 11-1/2" Quantity: 4 shocks Limited Lifetime Warranty This Comfort Ride suspension upgrade system greatly improves your towing experience.
... Equalizers are 13-1/8" long. Designed for use with 9,000-lb Dexter axles.Features: Attaches 4 leaf springs (sold separately) to your trailer frame Use table below to determine hanger location Includes: (2) 5" Tall front hangers with 5/8" bolt holes (28-68-4) (2) 4-1/2" Tall center hangers with 1" bolt holes (29-39-4) (2) 6-3/8" Tall rear hangers with 5/16" bolt holes (30-68-1) (2) 23-1/2 Long straight equalizers (13-119-03) Allows for 48-1/2" between axles 1" Diameter center hole for mounting to hanger 5/8" Diameter side hole for attaching to spring (4) 3-1/4" Long x 5/16" diameter spring keeper bolts (7-7) (4) 5/16" Diameter locknuts (6-11) (4) 4-1/2" Long x 5/8" diameter spring-eye bolts (7-181) (4) 5/8" Diameter locknuts (6-38LN) (2) 5" Long x 1" diameter equalizer bolts (7-182) (2) 1" Diameter locknuts (6-112) Designed for use on trailers with tandem, 9,000-lb Dexter axles Does not include components for mounting axle to springs Axle Capacity A - Distance Between Front and Center Hangers B - Distance Between U-Bolts C - Distance Between Center and Rear Hangers D - Distance Between Center of Axle and Trailer Frame 9,000 lbs 37-7/10" 48-1/2" 38-1/10" 4-7/8"
... Adjustable mounting brackets and hardware included. Fits 3" axles.Features: Heavy-duty gas shocks absorb road vibration to provide a more comfortable towing experience Nitrogen-charged shock absorbers help to eliminate trailer bouncing, chucking, and porpoising Adjustable mounting brackets allow the shocks to be positioned nearly vertically Limits up-and-down motion of trailer on both compression and rebound Shocks sit at an outward, 15-degree angle Helps to control trailer sway by limiting lateral movement Improves front-to-back, side-to-side, and up-and-down movement of your trailer Bolt-on installation Included tie plates with extension pieces replace your existing U-bolt plates Upper brackets mount on trailer frame with included hardware Shocks attach to tie plate extensions and to upper brackets to help dampen movement of axle Specs: Application: tandem-axle trailers with leaf spring suspensions Axle size: 3" diameter (typical 5,200-lb to 7,000-lb axle) Shock length: Extended: 17-1/2" Compressed: 11-1/2" Quantity: 4 shocks Limited Lifetime Warranty This Comfort Ride suspension upgrade system greatly improves your towing experience.
... Equalizers are 13-1/8" long. Designed for use with 9,000-lb Dexter axles.Features: Attaches 4 leaf springs (sold separately) to your trailer frame Use table below to determine hanger location Includes: (2) 5" Tall front hangers with 5/8" bolt holes (28-68-4) (2) 4-1/2" Tall center hangers with 1" bolt holes (29-39-4) (2) 6-3/8" Tall rear hangers with 5/16" bolt holes (30-68-1) (2) 13-1/8" Long straight equalizers (13-117-03) Allows for 38" between axles 1" Diameter center hole for mounting to hanger 5/8" Diameter side hole for attaching to spring (4) 3-1/4" Long x 5/16" diameter spring keeper bolts (7-7) (4) 5/16" Diameter locknuts (6-11) (4) 4-1/2" Long x 5/8" diameter spring-eye bolts (7-181) (4) 5/8" Diameter locknuts (6-38LN) (2) 5" Long x 1" diameter equalizer bolts (7-182) (2) 1" Diameter locknuts (6-112) Designed for use on trailers with tandem, 9,000-lb Dexter axles Does not include components for mounting axle to springs Axle Capacity A - Distance Between Front and Center Hangers B - Distance Between U-Bolts C - Distance Between Center and Rear Hangers D - Distance Between Center of Axle and Trailer Frame 9,000 lbs 32-2/5" 38" 32-9/10" 4-7/8"
... Adjustable mounting brackets and hardware included. Fits 3-1/2" axles.Features: Heavy-duty gas shocks absorb road vibration to provide a more comfortable towing experience Nitrogen-charged shock absorbers help to eliminate trailer bouncing, chucking, and porpoising Adjustable mounting brackets allow the shocks to be positioned nearly vertically Limits up-and-down motion of trailer on both compression and rebound Shocks sit at an outward, 15-degree angle Helps to control trailer sway by limiting lateral movement Improves front-to-back, side-to-side, and up-and-down movement of your trailer Bolt-on installation Included tie plates with extension pieces replace your existing U-bolt plates Upper brackets mount on trailer frame with included hardware Shocks attach to tie plate extensions and to upper brackets to help dampen movement of axle Specs: Application: triple-axle trailers with leaf spring suspensions Axle size: 3-1/2" diameter (typical 8,000-lb axle) Shock length: Extended: 17-1/2" Compressed: 11-1/2" Quantity: 6 shocks Limited Lifetime Warranty This Comfort Ride suspension upgrade system greatly improves your towing experience.
... Equalizers are 14-1/4" long. Designed for use with 10,000-lb to 15,000-lb, heavy-duty Dexter axles.Features: Attaches 4 leaf springs (sold separately) to your trailer frame Use table below to determine hanger location Includes: (2) 6-1/4" Tall front hangers with 1" bolt holes (28-67-4) (2) 4-1/8" Tall center hangers with 1-1/8" bolt holes (29-43-2) (2) 7-11/16" Tall rear hangers with 1/2" bolt holes (30-66-1) (1) 14-1/4" Long, left-hand equalizer (13-107-7LH) Allows for 38" between axles (1) 14-1/4" Long, right-hand equalizer (13-107-8RH) Allows for 38" between axles (4) 4-1/2" Long x 1/2" diameter spring keeper bolts (7-95) (4) 1/2" Diameter locknuts (6-46) (4) 5-1/2" Long x 1" diameter spring-eye bolts (7-169) (4) 1" Diameter locknuts (6-112) (2) 6" Long x 1-1/8" diameter equalizer bolts (7-170) (2) 1-1/8" Diameter locknuts (6-72) Designed for use on trailers with tandem, 10,000-lb to 15,000-lb, heavy-duty Dexter axles Does not include components for mounting axle to springs Axle Capacity A - Distance Between Front and Center Hangers B - Distance Between U-Bolts C - Distance Between Center and Rear Hangers D - Distance Between Center of Axle and Trailer Frame 10,000 lbs - 15,000 lbs 33" 38" 32-2/5" 5-1/2"
... Adjustable mounting brackets and hardware included. Fits 2-3/8" axles.Features: Heavy-duty gas shocks absorb road vibration to provide a more comfortable towing experience Nitrogen-charged shock absorbers help to eliminate trailer bouncing, chucking, and porpoising Adjustable mounting brackets allow the shocks to be positioned nearly vertically Limits up-and-down motion of trailer on both compression and rebound Shocks sit at an outward, 15-degree angle Helps to control trailer sway by limiting lateral movement Improves front-to-back, side-to-side, and up-and-down movement of your trailer Bolt-on installation Included tie plates with extension pieces replace your existing U-bolt plates Upper brackets mount on trailer frame with included hardware Shocks attach to tie plate extensions and to upper brackets to help dampen movement of axle Specs: Application: triple-axle trailers with leaf spring suspensions Axle size: 2-3/8" diameter (typical 3,500-lb axle) Shock length: Extended: 17-1/2" Compressed: 11-1/2" Quantity: 6 shocks Limited Lifetime Warranty This Comfort Ride suspension upgrade system greatly improves your towing experience.
... Equalizers are 24-5/8" long. Designed for use with 10,000-lb, general-duty Dexter axles.Features: Attaches 4 leaf springs (sold separately) to your trailer frame Use table below to determine hanger location Includes: (2) 5-1/4" Tall front hangers with 3/4" bolt holes (28-74-2) (2) 4-1/2" Tall center hangers with 1" bolt holes (29-42-2) (2) 4-1/2" Tall rear hangers (30-61-1) (2) 24-5/8" Long straight equalizers (13-141-3) Allows for 48-1/2" between axles 1" Diameter center hole for mounting to hanger 3/4" Diameter side hole for attaching to spring (4) 4-1/2" Long x 3/4" diameter spring-eye bolts (7-264) (4) 3/4" Diameter locknuts (6-113) (2) 5-1/4" Long x 1" diameter equalizer bolts (7-169) (2) 1" Diameter locknuts (6-112) Designed for use on trailers with tandem, 10,000-lb, general-duty Dexter axles Does not include components for mounting axle to springs Axle Capacity A - Distance Between Front and Center Hangers B - Distance Between U-Bolts C - Distance Between Center and Rear Hangers D - Distance Between Center of Axle and Trailer Frame 10,000 lbs 38-1/3" 48-1/2" 37-7/10" 5"
... Equalizers are 24-3/4" long. Designed for use with 10,000-lb to 15,000-lb, heavy-duty Dexter axles.Features: Attaches 4 leaf springs (sold separately) to your trailer frame Use table below to determine hanger location Includes: (2) 6-1/4" Tall front hangers with 1" bolt holes (28-67-4) (2) 4-1/8" Tall center hangers with 1-1/8" bolt holes (29-43-2) (2) 7-11/16" Tall rear hangers with 1/2" bolt holes (30-66-1) (1) 24-3/4" Long, left-hand equalizer (13-109-3LH) Allows for 48-1/2" between axles (1) 24-3/4" Long, right-hand equalizer (13-109-4RH) Allows for 48-1/2" between axles (4) 4-1/2" Long x 1/2" diameter spring keeper bolts (7-95) (4) 1/2" Diameter locknuts (6-46) (4) 5-1/2" Long x 1" diameter spring-eye bolts (7-169) (4) 1" Diameter locknuts (6-112) (2) 6" Long x 1-1/8" diameter equalizer bolts (7-170) (2) 1-1/8" Diameter locknuts (6-72) Designed for use on trailers with tandem, 10,000-lb to 15,000-lb, heavy-duty Dexter axles Does not include components for mounting axle to springs Axle Capacity A - Distance Between Front and Center Hangers B - Distance Between U-Bolts C - Distance Between Center and Rear Hangers D - Distance Between Center of Axle and Trailer Frame 10,000 lbs - 15,000 lbs 38-1/3" 48-1/2" 37-7/10" 5-1/2"
... Equalizers are 18-3/8" long. Designed for use with 10,000-lb, general-duty Dexter axles.Features: Attaches 4 leaf springs (sold separately) to your trailer frame Use table below to determine hanger location Includes: (2) 5-1/4" Tall front hangers with 3/4" bolt holes (28-74-2) (2) 4-1/2" Tall center hangers with 1" bolt holes (29-42-2) (2) 4-1/2" Tall rear hangers (30-61-1) (2) 18-3/8" Long straight equalizers (13-140-3) Allows for 42-1/4" between axles 1" Diameter center hole for mounting to hanger 3/4" Diameter side hole for attaching to spring (4) 4-1/2" Long x 3/4" diameter spring-eye bolts (7-264) (4) 3/4" Diameter locknuts (6-113) (2) 5-1/4" Long x 1" diameter equalizer bolts (7-169) (2) 1" Diameter locknuts (6-112) Designed for use on trailers with tandem, 10,000-lb, general-duty Dexter axles Does not include components for mounting axle to springs Axle Capacity A - Distance Between Front and Center Hangers B - Distance Between U-Bolts C - Distance Between Center and Rear Hangers D - Distance Between Center of Axle and Trailer Frame 10,000 lbs 35-1/10" 42-1/4" 34-2/3" 5"
... Equalizers are 14-1/4" long. Designed for use with 10,000-lb, general-duty Dexter axles.Features: Attaches 4 leaf springs (sold separately) to your trailer frame Use table below to determine hanger location Includes: (2) 5-1/4" Tall front hangers with 3/4" bolt holes (28-74-2) (2) 4-1/2" Tall center hangers with 1" bolt holes (29-42-2) (2) 4-1/2" Tall rear hangers (30-61-1) (2) 14-1/4" Long straight equalizers (13-139-3) Allows for 38" between axles 1" Diameter center hole for mounting to hanger 3/4" Diameter side hole for attaching to spring (4) 4-1/2" Long x 3/4" diameter spring-eye bolts (7-264) (4) 3/4" Diameter locknuts (6-113) (2) 5-1/4" Long x 1" diameter equalizer bolts (7-169) (2) 1" Diameter locknuts (6-112) Designed for use on trailers with tandem, 10,000-lb, general-duty Dexter axles Does not include components for mounting axle to springs Axle Capacity A - Distance Between Front and Center Hangers B - Distance Between U-Bolts C - Distance Between Center and Rear Hangers D - Distance Between Center of Axle and Trailer Frame 10,000 lbs 33" 38" 32-3/8" 5"
... Equalizers are 17-3/8" long. Designed for use with 9,000-lb Dexter axles.Features: Attaches 4 leaf springs (sold separately) to your trailer frame Use table below to determine hanger location Includes: (2) 5" Tall front hangers with 5/8" bolt holes (28-68-4) (2) 4-1/2" Tall center hangers with 1" bolt holes (29-39-4) (2) 6-3/8" Tall rear hangers with 5/16" bolt holes (30-68-1) (2) 17-3/8" Long straight equalizers (13-118-03) Allows for 42-1/4" between axles 1" Diameter center hole for mounting to hanger 5/8" Diameter side hole for attaching to spring (4) 3-1/4" Long x 5/16" diameter spring keeper bolts (7-7) (4) 5/16" Diameter locknuts (6-11) (4) 4-1/2" Long x 5/8" diameter spring-eye bolts (7-181) (4) 5/8" Diameter locknuts (6-38LN) (2) 5" Long x 1" diameter equalizer bolts (7-182) (2) 1" Diameter locknuts (6-112) Designed for use on trailers with tandem, 9,000-lb Dexter axles Does not include components for mounting axle to springs Axle Capacity A - Distance Between Front and Center Hangers B - Distance Between U-Bolts C - Distance Between Center and Rear Hangers D - Distance Between Center of Axle and Trailer Frame 9,000 lbs 34-2/3" 42-1/4" 35" 4-7/8"
... Equalizers are 18-3/8" long. Designed for use with 10,000-lb to 15,000-lb, heavy-duty Dexter axles.Features: Attaches 4 leaf springs (sold separately) to your trailer frame Use table below to determine hanger location Includes: (2) 6-1/4" Tall front hangers with 1" bolt holes (28-67-4) (2) 4-1/8" Tall center hangers with 1-1/8" bolt holes (29-43-2) (2) 7-11/16" Tall rear hangers with 1/2" bolt holes (30-66-1) (1) 18-3/8" Long, left-hand equalizer (13-108-3LH) Allows for 42-1/4" between axles (1) 18-3/8" Long, right-hand equalizer (13-108-4RH) Allows for 42-1/4" between axles (4) 4-1/2" Long x 1/2" diameter spring keeper bolts (7-95) (4) 1/2" Diameter locknuts (6-46) (4) 5-1/2" Long x 1" diameter spring-eye bolts (7-169) (4) 1" Diameter locknuts (6-112) (2) 6" Long x 1-1/8" diameter equalizer bolts (7-170) (2) 1-1/8" Diameter locknuts (6-72) Designed for use on trailers with tandem, 10,000-lb to 15,000-lb, heavy-duty Dexter axles Does not include components for mounting axle to springs Axle Capacity A - Distance Between Front and Center Hangers B - Distance Between U-Bolts C - Distance Between Center and Rear Hangers D - Distance Between Center of Axle and Trailer Frame 10,000 lbs - 15,000 lbs 35-1/10" 42-1/4" 34-2/3" 5-1/2"
... Adjustable mounting brackets and hardware included. Fits 3" axles.Features: Heavy-duty gas shocks absorb road vibration to provide a more comfortable towing experience Nitrogen-charged shock absorbers help to eliminate trailer bouncing, chucking, and porpoising Adjustable mounting brackets allow the shocks to be positioned nearly vertically Limits up-and-down motion of trailer on both compression and rebound Shocks sit at an outward, 15-degree angle Helps to control trailer sway by limiting lateral movement Improves front-to-back, side-to-side, and up-and-down movement of your trailer Bolt-on installation Included tie plates with extension pieces replace your existing U-bolt plates Upper brackets mount on trailer frame with included hardware Shocks attach to tie plate extensions and to upper brackets to help dampen movement of axle Specs: Application: triple-axle trailers with leaf spring suspensions Axle size: 3" diameter (typical 5,200-lb to 7,000-lb axle) Shock length: Extended: 17-1/2" Compressed: 11-1/2" Quantity: 6 shocks Limited Lifetime Warranty This Comfort Ride suspension upgrade system greatly improves your towing experience.
Trailer suspension system replaces your leaf spring suspension to provide a stable ride. Walking beams keep weight distributed evenly between both axles. Pivoting arms help keep your trailer level on rough ground. Rubber springs absorb road shock.The included axle seats must be welded to your axle beam. If you already have seats on your axle, you will need to grind or cut the welds off to remove those seats and replace them with the Timbren axle seats.
Filters
