Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
The appropriate torque spec for any application will vary depending on the construction of the wheel as well as on the stud size. I suggest checking the wheels you're using to see if their manufacturer has a suggested torque rating. Steel trailer…
view full answer...It looks like you recently purchased some Kodiak Wheel Bolts #K58WB316 and 5/8" flange nuts #95188 from us, so thank you for being a loyal customer! What you'll want to torque those to will depend on the construction of your wheels and the…
view full answer...Based on the images you sent in it appears your 2005 Starcraft RT10 does not use a traditional A-Frame coupler so the Lock N Roll #336TS504 will not work for your application. Instead you will need to measure the width between your frame rails the…
view full answer...A standard trailer dolly like #RA20 is not directly compatible with the Lock N Roll hitch system. There is not a dolly designed to work with that system, however if you were to use a similar system with the ability to attach to a hitch ball, then a…
view full answer...On a Class I or II 1-1/4 inch trailer hitch you will need to use a 1/2 inch hitch lock such as #e98879. This lock has a 2 inch span which is the usable length of the pin. I have included a link to a video review for you. For a Class III or IV 2 inch…
view full answer...For your 2019 Honda Passport I do recommend going with the Curt Echo Brake Controller #C51180. We honestly have not heard of any of the over-heating/electrical issues that you mentioned seeing and we do get a lot of customer feedback on this…
view full answer...Some items in a trailer or RV will run off of 12 volt DC power or AC power so if your fridge runs when not connected to shore power then it will run off of the battery. That battery can receive a maintenance charge from the 12 volt circuit on a 7-Way…
view full answer...The Lock N Roll Articulating Coupler #336TS504 dimensions for the A-frame are 2.19" at the narrowest part and 11.22" at the widest part of the opening. It is 9.68" long from largest opening to narrowest. I have included a picture below…
view full answer...The #336VS503515 comes with the adjustable channel bracket along with the adjustable channel mount and bolts. You will need to install the channel mount in the appropriate rise/drop position since it does not come fully assembled. It looks like you…
view full answer...Good question, and the hitch on your Audi is not rated for use with weight distribution, so what I recommend instead is a friction sway control set up. This will provide you with better control over your trailer to give you a much more controlled,…
view full answer...There is a trailer coupler designed specifically to be used for offroading, from Lock N Roll. This uses an articulating connection between the coupler and accompanying hitch mount that gives a full 360 degree rotation between the two. So the trailer…
view full answer...For building an offroad trailer the part #ASR2KHDS02 would be an excellent place to start. The only other kit I would have you consider would be the #ASR35HDS02. This is setup for off-road tires, has a 3,500 lb capacity, will give the trailer a 4…
view full answer...Filter Your Search
Contact and Help