Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
I recommend going with the 1,000lb SumoSprings Solo Custom Helper Springs #SS35GR for 4WD or #SS35GR for 2WD. These are going to give you all the support and control you need, without affecting your factory ride quality on daily driving. The 1.5K…
view full answer...Between the 1,500 lb SumoSprings #SS95GR and 1,000 lb SumoSprings #SS35GR that fit your 2023 Nissan Titan, the best option is the latter, the 1k springs: - SumoSprings Solo Custom Helper Springs #SS35GR The 1,000 lb capacity is more than enough…
view full answer...Hi Steve, There is not a trailer end 4-round that comes with the wiring attached, just the plug version, the Pollak Heavy-Duty, 4-Pole, Round Pin Trailer Wiring Connector - Metal - Trailer End #PK11402.
view full answer...Reprogramming will be necessary with the installation of the Towing Kit w/ Ball Mount and Trailer Wiring #SH36FR. Unlike other wiring harnesses, this includes a wiring control module that you will plug your vehicle wiring harness into. Without…
view full answer...As you mentioned your 2019 Nissan Titan being a work truck there will be another option, but there is no spacer available for the SumoSprings Solo Custom Helper Springs #SS95GR, unfortunately. With that said, as the #SS95GR is rated to 1,500 pounds…
view full answer...The Timbren Suspension Enhancement System #TNRTTNB is designed to only fit a stock suspension height on your 2021 Nissan Titan. You can use the Timbren 1" Spacer #A25723-90AH00 to space out the Timbren for the Rough Country lift since they use…
view full answer...Since Timbrens are notoriously harsher than SumoSprings and the truck will be unloaded for most of the year I would recommend the SumoSprings for your 2019 Nissan Titan with the part #SS95GR. This will give you the support you are looking for without…
view full answer...The height of the SumoSrpings Solo Custom Helper Springs #SS95GR is 5-1/2 inches without the top bolt and 6-1/2 inches with the top bolt. I went ahead and attached a diagram of these dimensions to give you perspective. If you need the confirmation…
view full answer...The Timbren install pictures you saw might have been from a different vehicle as the #TNRTTN that you referenced installs by attaching to the bottom of the bump stop bracket that you found.
view full answer...Overall height is 5-3/16 inches. That means that once installed, the double convoluted springs from the Timbren SES Kit, #TGMRCK25D, will sit 5-3/16 inches below the jounce bumper holder on the frame. The outer diameter of these springs is 4-5/16…
view full answer...Most WD shanks that fit a 2-1/2" receiver taper down to the normal 2" receiver size, just like the Equal-i-zer Shank #EQ90-02-4700. The only thing that you need to be sure of is that the mounting holes are in the same space. I have linked a…
view full answer...Hey Zach, so we haven't had the chance to install a brake controller in a 2018 Mazda CX-9 so we don't have the wire color for the stoplight circuit switch but we can still help. The easiest is to use a circuit tester like the part #PTW2993 to…
view full answer...Related Searches
Filter Your Search
Contact and Help