Mounting cabinets directly to a trailerwall can lead to weak support or shifting over time. This aluminum Z-rail supports the cabinet edge and spreads the load across the wall for a more secure hold.Highlights Supports Wall-Mounted Cabinets: Helps secure cabinets to your trailerwall while distributing weight more evenly. Spreads Load Across Mounting Surface: Helps reduce stress on fasteners and trailerwalls.
Building racks or frames for your trailer requires strong tubing that can handle load without flexing. This thick-walled aluminum rectangular tubing provides a rigid section you can cut and customize for your build.Highlights Thick-Walled Structural Tubing: Provides added strength for ladder racks and custom trailer frames. Rectangular Profile for Stability: Wide surface helps support loads and align with flat mounting points.
Cut edges on trailers and siding can wear down or leave a rough, unfinished look over time. This squared J-channel trim covers exposed edges to protect them and create a straight, finished edge along panels.Features to know about Matching Your Existing Trim If you're replacing worn trim or finishing a panel edge, getting the right fit is important. This J-channel trim is not trailer-specific. To get the right fit, you'll need to match it to your existing trim by measurement. If you're replacing a section, measure your current trim or panel edge and compare: Overall length (this channel is 93-1/2") Overall height (this channel is 1/4") Overall width (this channel is 7/8") Internal channel opening (measure the inside distance between the channel walls) Panel thickness (the thickness of the material that fits into the channel) The fit depends on both the channel opening and the panel thickness.
Cut edges on trailers and siding can be rough, wear down, or catch on gear over time. This rounded J-channel trim covers exposed edges to protect them and create a smoother, more finished edge along panels.Features to know about Matching Your Existing Trim If you're replacing worn trim or finishing a panel edge, getting the right fit is important. This J-channel trim is not trailer-specific. To get the right fit, you'll need to match it to your existing trim by measurement. If you're replacing a section, measure your current trim or panel edge and compare: Overall length (this channel is 93-1/2") Overall height (this channel is 5/16") Overall width (this channel is 11/16") Internal channel opening (measure the inside distance between the channel walls) Panel thickness (the thickness of the material that fits into the channel) The fit depends on both the channel opening and the panel thickness.
Use this Z-rail to hang cabinets on the wall of your enclosed trailer. Aluminum is sturdy and lightweight. Rail can be cut to fit your specific application.Features: Z-rail is used to hang cabinets on the wall of your enclosed trailer Aluminum construction is sturdy and lightweight Easy to customize and install Attaches with screws (not included) Can be cut to fit your specific application Dimensions: 93-1/2" long x 2" tall x 1-1/2" deep Made in the USA
This 93-1/2" long section of thin-walled tubing is used to frame the side doors of your enclosed trailer, concealing any unfinished edges. Aluminum construction is sturdy and rustproof. ... Features: Squared tube trim frames the side doors of your enclosed trailer Aluminum construction is sturdy and rustproof Easy to customize and install Attaches with screws (not included) Can be cut to fit your specific application Dimensions: 93-1/2" long x 2" tall x 1" wide Tubing wall thickness: 1/16" Made in the USA
Exposed edges on trailers and cabinets can wear down or loosen over time. This serrated C-channel trim covers raw edges to protect them and grips the material during installation for a more secure fit.Features to know about Matching Your Existing Trim If you're replacing worn trim or finishing exposed panel edges, getting the right fit is important. This C-channel trim is not trailer-specific. To get the right fit, you'll need to match it to your existing trim by measurement. If you're replacing a section, measure your current trim or panel edge and compare: Overall length (this channel is 93-1/2") Overall height (this channel is 1") Overall width (this channel is 1-1/8") Internal channel opening (measure the inside distance between the channel walls) Panel thickness (the thickness of the material that fits into the channel) The fit depends on both the channel opening and the panel thickness.
Use the tools the pros use for exterior RV repair. With a mylar backing for added structural support, this butyl tape was designed for weatherproofing corners and joints along flat, even surfaces. Works well in some marine and HVAC applications.
Use the tools the pros use for exterior RV repair. With a mylar backing for added structural support, this butyl tape was designed for weatherproofing corners and joints along flat, even surfaces. Works well in some marine and HVAC applications.
To install an awning on your trailer, you need a secure track for the fabric to slide into and stay in place. This aluminum rail mounts along the wall to support and secure the awning edge.Highlights Mounts and Secures Awning Fabric: Provides a track that holds the awning edge in place along your trailer. Designed for Awning Cord Tracks: Channel allows the awning cord to slide in and stay aligned during setup. Resists Corrosion from Water Exposure: Aluminum construction helps prevent breakdown over time.
Building racks or frames for your trailer requires straight, rigid tubing that can handle load. This rectangular aluminum tubing provides a strong section you can cut and customize for your project.Features to know about Matching Your Existing Tubing If you're repairing a frame or building a new rack or support, matching the right size and thickness is important. This rectangular tubing is not trailer-specific. To get the right fit, you'll need to match it to your existing tubing by measurement. If you're replacing a section, measure your current tubing or mounting area and compare: Overall length (this tubing is 93-1/2") Outer dimensions (this tubing is 2" x 1") Connection method — how the tubing is mounted or joined to your existing setup The size and wall thickness both affect how the tubing fits and how it handles load.
Cushioned, 2-tang clevis hitch also works as a pintle and as a ball mount. Special, polyurethane-filled shank protects your equipment and smoothes your ride. Sturdy steel construction. GTW is 10,000 lbs; TW is 2,000 lbs.Features: Functions as clevis hitch, pintle hitch or ball mount Cushioned to protect tow vehicle's driveline and hitch assembly, as well as trailer's contents Absorbs shock Reduces bounce and rhythmic vibration Constructed of powder coated steel with interior polyurethane cushion Slides into 2-1/2" square trailer hitch receiver and secures with 5/8" hitch pin (sold separately) Made in USA Specs: Application: 2-1/2" x 2-1/2" trailer hitch receivers Towing capacity: 10,000 lbs Tongue weight: 2,000 lbs Ball hole/clevis pin hole diameter: 1" Shank wall thickness: 1/4" 2-Year limited warranty
Finish the lower edges on your trailer or stone guard with this aluminum rub rail trim. It covers exposed edges to reduce wear and helps keep water from getting behind the panel.Highlights Protects Unfinished Edges: Even rub rail trim covers raw edges along the bottom of your trailer. Versatile Use: Can also be used on your trailer's stone guard. Resists Corrosion from Water Exposure: Aluminum construction helps prevent breakdown over time.
When your trailer just needs a little adjustment, this 2" drop gets it there. The ball is already installed, so you can slide it into your receiver, line up your trailer, and get moving.Highlights Keep Your Trailer Level While Towing: 2" drop helps match trailer height to your tow vehicle. Handle Lighter Loads With Confidence: Rated for 5,000 lbs towing and 500 lbs tongue weight.
Ideal for the rough rigors of off-road towing or overlanding, this vehicle-side hitch works with your trailer-side Lock N Roll coupler (sold separately) to form an extra-strong connection that is safe and secure, no matter the terrain.How Lock 'N' Roll Works Each Lock 'N' Roll setup requires 2 parts - a trailer end and a vehicle end. Together they create a strong, secure connection. To connect, just line up the trailer end and vehicle end together and place the outer metal tabs of the trailer-end coupler into the hooks on the vehicle-end hitch.
You've got different trailers, different loads, and no time to dig through parts. This mount gives you both balls, all the height you need, and a finish that doesn't flake when it hits salt, mud, or jobsite abuse.Features to Know About Switch Trailers, Not Hardware You've got more than one trailer, and this mount makes it easy to go between them. Adjust the height in 1" steps to match what you're hauling, with up to 6" of rise or drop.
Tri-ball ball mount lets you tow a variety of trailers using a single shank. Just turn the shank so the ball matches your trailer coupler. Hollow steel shank is durable and has a black powder coat finish that resists corrosion.Features: Multi-ball mount has 3 differently sized balls to meet your towing needs To switch between balls, remove ball mount from hitch, rotate, and slide back into receiver Hollow steel shank with black powder coat finish resists corrosion Hitch lock or pin and clip sold separately Specs: Application: 2" x 2" trailer hitch receivers 1-7/8" Ball capacity: Gross towing weight: 2,000 lbs Maximum tongue weight: 200 lbs 2" Ball capacity: Gross towing weight: 6,000 lbs Maximum tongue weight: 600 lbs 2-5/16" Ball capacity: Gross towing weight: 10,000 lbs Maximum tongue weight: 1,000 lbs Overall length: 12" Distance from center of hitch pin hole to center of hitch ball: 2-5/16" ball: 7-1/4" 2" and 1-7/8" balls: 8-1/4" Limited 1-year warranty
This 93-1/2" long even rub rail covers and protects unfinished edges along the bottom of your enclosed trailer or around your trailer's stone guard. Aluminum construction is sturdy and rustproof. Trim can be cut to fit your application.Features: Even rub rail trim covers unfinished edges along the bottom of your enclosed trailer Can also be used on your trailer's stone guard Easy to customize and install Attaches with screws (not included) Can be cut to fit your specific application Aluminum construction is sturdy and rustproof Trim can be cut to fit your specific application Dimensions: 93-1/2" long x 1-1/2" tall x 1/8" deep Made in the USA
Back up, line it up, and set it on the ball. The 4" drop helps get your trailer sitting right, and with the ball already installed, you can slide it into your receiver and get moving.Highlights Keep Your Trailer Level While Towing: 4" drop helps match trailer height to your tow vehicle. Handle Medium-Duty Loads With Confidence: Rated for 6,000 lbs towing and 600 lbs tongue weight.
This edge trim covers and protects unfinished or sharp edges around cabinets or your enclosed trailer's stone guard. Aluminum construction is sturdy and rustproof. Trim can be cut to fit your specific application.Features: Nosing (or edge trim) covers and protects unfinished edges on your enclosed trailer Can be used on cabinets or on your trailer's stone guard Aluminum construction is sturdy and rustproof Easy to customize and install Attaches with screws (not included) Can be cut to fit your specific application Dimensions: 93-1/2" long x 1" tall x 3/16" deep Made in the USA
This 93-1/2" long section of rounded J-channel trim covers unfinished or sharp edges around your enclosed trailer's stone guard. Aluminum construction is sturdy and rustproof. Trim can be cut to fit your specific application.Features: Rounded J-channel trim covers the cut edges on your enclosed trailer Can be used on your trailer's stone guard or as trim on exterior siding Aluminum construction is sturdy and rustproof Easy to customize and install Attaches with screws (not included) Can be cut to fit your specific application Dimensions: 93-1/2" long x 7/8" tall x 1/4" deep Made in the USA
Lower trailer edges take on road spray, debris, and water that can wear down panels or seep behind seams. This uneven aluminum rub rail trim covers exposed edges to protect them and help keep water from getting behind the panel.Highlights Covers and Protects Lower Edges: Helps reduce wear, impact, and water exposure along the bottom of your trailer. Versatile Use: Can also be used on your trailer's stone guard. Resists Corrosion from Water Exposure: Aluminum construction helps prevent breakdown over time.
When building cabinets or trailer doors, loose panel joints can shift or leave visible gaps. This smooth H-channel frame joins panel edges securely while covering the seam for a finished connection.If you're not sure, take a few measurements and photos of your current setup and reach out to etrailer support for help comparing options. Specs Application: For building cabinets and doors in trailers Dimensions and Construction: Overall dimensions: 93-1/2" long x 2" tall x 1-1/8" deep Channel opening: approximately 1" Construction: aluminum
This bottom rail trim covers and protects unfinished edges along the bottom of your enclosed trailer or around your trailer's stone guard. Aluminum construction is sturdy and rustproof. Trim can be cut to fit your specific application.Features: Flat rub rail trim covers unfinished edges along the bottom of your enclosed trailer Can also be used on your trailer's stone guard Easy to customize and install Attaches with screws (not included) Can be cut to fit your specific application Aluminum construction is sturdy and rustproof Trim can be cut to fit your specific application Dimensions: 93-1/2" long x 3" tall x 1/2" deep Made in the USA
Filters
