5-3/8" Waterproof light with built-in rear reflex reflector displays brake, tail, and turn signals on your trailer. Mounts on the surface of the trailer and hardwires with the 3-wire pigtail harness.Features: Round brake, tail, and turn signal light Built-in rear reflex reflector Waterproof - great for boat trailers White LEDs with red lens More efficient and durable than incandescent bulbs Polycarbonate base with acrylic lens Surface mount with built-in flange Hardware not included 3-Wire pigtail harness hardwires to the trailer White wire for ground Brown wire for tail lights Red wire for stop and turn lights DOT and SAE compliant Meets FMVSS 108 requirements Assembled in the USA Specs: Dimensions: 5-3/8" diameter x 5/8" thick Compatible with 12V DC systems Diodes: 20 Operating voltage: 9V-16V DC Wire length: 7" 1-Year limited warranty
2-1/2" Round. Low-profile LED trailer light serves as either a side marker or clearance light. Built-in reflex reflector. Snap-on polycarbonate lens. Surface mount with included gasket - hardware not included. 2-Wire design. P2 rated.Features: Round trailer light can function as either a clearance or side marker light Built-in reflex reflector eliminates the need for a separate reflector LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate snap-on lens and black ABS housing Red lens over white LED Compatible with 12V DC systems Surface mount to trailer - hardware not included Attached gasket helps create a weathertight seal 2-Wire pigtail hardwires into trailer P2 rated light produces a 90-degree beam pattern Specs: Quantity: 1 clearance/marker light Dimensions: 2-1/2" diameter x 15/16" thick Diodes: 1 Power draw at 12V: 0.073 amps Lifetime warranty on LEDs P2-Rated Lights A P2-rated light produces a 45-degree angle of light to either side of its centerline for a total of 90 degrees of coverage.
5-3/4" Waterproof light with built-in reflex reflector displays brake, tail, and turn signal light. Mounts in cutout with built-in flange and works with 3-prong plugs.Features: Round brake, tail, and turn signal light Glows for tail light Brightens for brake light Flashes for turn signal light Built-in reflex reflector Waterproof - great for boat trailers Clear LEDs with red lens More efficient and durable than incandescent bulbs Polycarbonate lens and housing Recessed mount with built-in flange Hardware not included PL-3 connector works with 3-prong plugs Specs: Dimensions: 5-3/4" diameter x 1-5/8" thick Distance between mounting holes (center on center): 4-7/8" Compatible with 12V DC systems Diodes: 10 Power draw: Stop: 0.413 amps at 12.8 volts Tail: 0.026 amps at 12.8 volts Lifetime warranty on LEDs What Wiring Do I Need?
4-5/16" Waterproof light with a built-in reflector displays brake, tail, and turn signals on your trailer. It mounts flush with a grommet (sold separately) and works with 3-prong plugs.Features: Round brake, tail, and turn signal light Glows for tail light Brightens for brake light Flashes for turn signal Built-in reflector increases light output Waterproof - great for boat trailers Red LEDs with clear lens More efficient and durable than incandescent bulbs Polycarbonate lens and housing Flush mount with grommet (A45GB - sold separately) Mounts in any 360-degree position Optional mounting bracket: BK45BB (sold separately) PL-3 connector works with 3-prong plug (A45PB and A47PB - sold separately) DOT compliant Specs: Dimensions: 4-5/16" diameter x 2-3/8" thick Diodes: 12 Power draw at 12.8V: Stop/turn: 0.208 amps Tail: 0.013 amps Lifetime warranty on LEDs What Wiring Do I Need?
4-5/16" Waterproof light with built-in reflector displays brake, tail, and turn signals on your trailer. It mounts flush with a grommet (sold separately) and works with 3-prong plugs. Compatible with 24V systems.Features: Round brake, tail, and turn signal light Glows for tail light Brightens for brake light Flashes for turn signal Built-in reflector increases light output Waterproof - great for boat trailers Red LEDs with clear lens More efficient and durable than incandescent bulbs Polycarbonate housing and lens Flush mount with grommet (A45GB - sold separately) Mounts in any 360 degree position Optional mounting bracket: BK45BB (sold separately) PL-3 connector works with 3-prong plug (A45PB or A47PB - sold separately) DOT compliant Specs: Dimensions: 4-5/16" diameter x 2-3/8" thick Light face diameter: 4" Compatible with 24V DC systems Diodes: 12 Power draw at 24V: Stop/turn: 0.171 amps Tail: 0.061 amps Lifetime warranty on LEDs What Wiring Do I Need?
2-1/2" Diameter round. LED trailer light serves as either a side marker light or a clearance light. Pirhana series combines modern design with vibrant lighting. Recessed mount with grommet (sold separately). Accepts 2-prong plug. P2 rated.Features: Round LED trailer light serves as either a side marker light or a clearance light Piranha series combines modern design with vibrant lighting for a unique look Built-in reflex reflector removes the need for a separate reflector Durable SMD construction of LED circuit board Better withstands shock and vibration Allows for improved heat distribution and thinner construction LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Red lens over white LEDs Compatible with 12V DC systems Recessed mount with grommet (142-18 - sold separately) Accepts industry-standard 2-prong plug (sold separately) DOT compliant P2 rated Made in the USA Specs: Dimensions: 2-1/2" diameter x 15/16" deep Diodes: 4 Power draw at 12V: 0.08 amps 10-Year limited warranty P2-Rated Lights A P2-rated light produces a 45-degree angle of light to either side of its centerline for a total of 90 degrees of coverage.
2-1/2" Diameter round. LED trailer light serves as either a side marker light or a clearance light. Built-in reflex reflector. Recessed mount with grommet (sold separately). Accepts 2-prong plug. P2 rated.Features: Round LED trailer light serves as either a side marker light or a clearance light Built-in reflex reflector removes the need for a separate reflector LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Red lens over white LED Compatible with 12V DC systems Recessed mount with grommet (142-18 - sold separately) Accepts industry-standard 2-prong plug (B162-49 - sold separately) DOT compliant P2 rated Made in the USA Specs: Dimensions: 2-1/2" diameter x 15/16" deep Diodes: 1 Power draw at 12V: 0.04 amps Limited lifetime warranty on LEDs P2-Rated Lights A P2-rated light produces a 45-degree angle of light to either side of its centerline for a total of 90 degrees of coverage.
2-3/16" Diameter red trailer reflector enhances visibility on the road. Durable acrylic construction. Surface mounts with a single screw (not included). Meets FMVSS requirements.Features: Roundred trailer reflector enhances visibility on the road Durable acrylic construction Surface mount with a single screw (not included) Meets FMVSS "A" when properly installed Specs: Dimensions: 2-3/16" diameter 3-Year warranty
150' L x 2" W; alternating red/silver reflector tape; DOT certified; rated for 5 years use. Use this durable, technologically advanced conspicuity tape roll to highlight your truck or trailer. 6" Silver/6" red pattern, perforated.Features: Alternating red/silver reflector tape makes your truck or trailer more visible in low light 6" Silver/6" red pattern Technologically advanced microprismatic design provides superior long-distance visibility Impact-resistant - maintains performance after taking a beating Withstands high-pressure washing Can be cut or riveted without damaging its ability to reflect light Durable construction means no delamination UV top coating resists fading High-strength adhesive - resists tape edge lift Perforated for easy application DOT certification clearly marked on tape Easily applies to flat, round, or curved surfaces Made of a flexible polyester metalized film Repositionable during installation - cures in 24 hours Specs: Dimensions: 150' Long x 2" wide x.008" thick DOT approved 5-Year warranty Use this reflective tape to clearly mark your truck or trailer in accordance with DOT regulations.
3-3/16" Diameter red trailer reflector enhances visibility on the road. Durable acrylic construction. Surface mounts with adhesive backing. Meets FMVSS requirements.Features: Roundred trailer reflector enhances visibility on the road Durable acrylic construction Surface mounts with adhesive backing Meets FMVSS "A" when properly applied Specs: Dimensions: 3-3/16" diameter Quantity: 1 reflector 3-Year warranty Manufacturer Cross Reference Reflector will work as an exact replacement for: Uni Bond # RF3001R Truck Lite # 98005R3 Grote # 40052 Peterson # B475R Manufacturer Specifications
2-1/2" Round. Waterproof, incandescent trailer light serves as either a side marker light or a clearance light. Built-in reflex reflector. Premium bulb for long life. Recessed mount with grommet (sold separately). Accepts 2-prong plug. P2 rated.Features: Round, incandescent trailer light serves as either a side marker light or a clearance light Built-in reflex reflector removes the need for a separate reflector Sealed, waterproof housing and lens unit is submersible Premium bulb provides up to 15,000 hours of light Red lens over incandescent bulb Compatible with 12V DC systems Recessed mount with grommet (142-18 - sold separately) Accepts industry-standard 2-prong plug (142-49 sold separately) DOT compliant P2 rated Made in the USA Specs: Overall dimensions: 2-1/2" diameter x 15/16" deep Bulb type: incandescent 1-Year limited warranty Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
3" Round, double-sided redreflector helps mark your driveway or parking area location, giving you an added level of safety in the dark. SAE and DOT compliant.Features: Round, double-face driveway reflector Adds safety and helps indicate the location of your driveway or parking area White housing around the red double-sided reflector SAE and DOT compliant Specs: Overall length: 36" Visible portion of pole length: 31-5/8" Reflector diameter: 3" Overall diameter including the housing: 3-5/16"
This 3" round, red reflective sticker is designed for use on the side or rear of your truck, trailer, or equipment. The tough polyester reflector stands up to outdoor use. ...
2-7/8" Diameter round. Low-profile trailer reflector increases visibility of vehicle in low lighting. Spitfire design has 50 percent wider angle of reflectivity than conventional reflectors. Adhesive backing for easy install.
5-5/8" Waterproof LED light displays brake, tail, and turn signals on your trailer. It mounts to the surface of your trailer with the built-in flange that doubles as a reflector and hardwires with the 3-wire pigtail harness.Features: Round brake, tail, and turn signal light Glows for tail light Brightens for brake light Flashes for turn signal Built-in reflex reflector Waterproof - great for boat trailers White LEDs with red lens More efficient and durable than incandescent bulbs Polycarbonate lens and housing Surface mount with built-in flange Hardware not included 3-Wire pigtail hardwires to trailer FMVSS compliant for trailers under 80" wide Specs: Overall dimensions: 5-5/8" diameter x 3/4" thick Light face: 4" diameter Diodes: 7 Wire length: 6" Power draw at 12.8 volts: 0.033 amps Lifetime warranty on LEDs
150' L x 2" W; alternating red/silver reflector tape; DOT certified; rated for 5 years of use. Use this durable, technologically advanced conspicuity tape roll to highlight your truck or trailer. 7" Silver/11" red.Features: Alternating red/silver reflector tape makes your truck or trailer more visible in low light 7" Silver/11" red pattern Technologically advanced microprismatic design provides superior long-distance visibility Impact-resistant - maintains performance after taking a beating Withstands high-pressure washing Can be cut or riveted without damaging its ability to reflect light Durable construction means no delamination UV top coating resists fading High-strength adhesive - resists tape edge lift DOT certification clearly marked on tape Easily applies to flat, round, or curved surfaces Made of a flexible polyester metalized film Repositionable during installation - cures in 24 hours Specs: Dimensions: 150' Long x 2" wide x.008" thick DOT approved 5-Year warranty Use this reflective tape to clearly mark your truck or trailer in accordance with DOT regulations.
2" Round. Waterproof trailer light serves as either a side marker light or a clearance light. Red lens with reflex reflector. Recessed mount with built-in flange. 2-Wire pigtail. 7 Diodes. ... Features: Round trailer light serves as either a side marker light or a clearance light Sonically sealed, waterproof housing and lens unit is submersible LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Red lens with reflex reflector Polycarbonate lens and housing Recessed mount with built-in flange - hardware not included 2-Wire pigtail - includes power lead and ground wire DOT compliant P2 rated Specs: Light diameter: 2" Overall dimensions: 3-1/16" diameter x 3/4" deep Diodes: 7 Power draw at 12.8 volts: 0.063 amps Lifetime warranty on LEDs Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
This red lens replaces the lens for your 4" round Peterson flush mount tail lights. Built in reflex reflector. Fits Peterson 413-3 and 425-3 series lights.
7" Diameter x 1-7/16" deep. Waterproof transit light serves 3 functions: stop, turn, tail. Weathertight gasket included. Surface mount on 6-1/4" centers. 3-Wire design. 12-24 Volts. 31 Red LEDs with a red lens and reflector.
2" Diameter round. Waterproof, LED trailer light serves as either a side marker light or clearance light. Miro-flex reflector increases light output. Recessed mount with grommet (sold separately). Accepts standard 2-prong plug. P2 rated.
Filters
