1. Trailer Lights
  2. Optronics
  3. Tail Lights
  4. Round
  5. LED Light
  6. Red
Miro-Flex LED Trailer Tail Light - Stop/Turn/Tail - Submersible - 12 Diodes - Round - Red Lens - 24V

Miro-Flex LED Trailer Tail Light - Stop/Turn/Tail - Submersible - 12 Diodes - Round - Red Lens - 24V

Item # STL23R24B
lowest price pledge
Our Price: $25.39
Trailer Lights
Orders above $99 qualify for Free Shipping
Shipping Weight: 0.37 lbs
Quantity: 
In Stock
Trailer Lights STL23R24B - Round - Optronics
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Need help with installation?
Locate installers near me
4-5/16" Diameter x 2-3/8" deep. Waterproof trailer light serves as a stop, turn, and tail light. Miro-Flex faceted reflector increases light output. Flush mount with required grommet (sold separately). Accepts standard 3-prong plug. Lowest Prices for the best trailer lights from Optronics. Miro-Flex LED Trailer Tail Light - Stop/Turn/Tail - Submersible - 12 Diodes - Round - Red Lens - 24V part number STL23R24B can be ordered online at etrailer.com or call 800-298-1624 for expert service.
  • All Info
  • Reviews (11)
  • Q & A (25)
  • Photos
  • Why etrailer?

Optronics Trailer Lights - STL23R24B

  • Tail Lights
  • Round
  • LED Light
  • Red
  • 4 Inch Diameter
  • Recessed Mount
  • Stop/Turn/Tail
  • Submersible Lights
  • Optronics

4-5/16" Diameter x 2-3/8" deep. Waterproof trailer light serves as a stop, turn, and tail light. Miro-Flex faceted reflector increases light output. Flush mount with required grommet (sold separately). Accepts standard 3-prong plug.


Features:

  • Round trailer light serves 3 functions on trailers less than 80" wide
    • Stop light
    • Tail light
    • Turn signal
  • Miro-flex faceted reflector design provides increased light output with a contemporary appearance
  • Sonically sealed, waterproof housing and lens unit is submersible
  • LEDs make great replacements for incandescent lights
    • Last 50 times longer
    • More efficient - provide brighter light with less power output
    • No bulbs to replace - no brittle filaments
  • Red lens over white LEDs
  • Durable polycarbonate housing and lens
  • Compatible with 24V DC systems
  • Flush mount with grommet (A45GB - sold separately)
    • Mounts in any 360 degree position
  • Accepts industry standard 3-prong plug (A45PB or A47PB - both sold separately)
  • DOT compliant


Specs:

  • Dimensions: 4-5/16" diameter x 2-3/8" deep
    • Light face diameter: 4"
  • Diodes: 12
  • Power draw at 24V:
    • Stop/turn: 0.171 amps
    • Tail: 0.061 amps
  • Lifetime warranty on LEDs


Optronics STL23 Series Miro-Flex Tail Light Diagram

Sonically Sealed, Waterproof Trailer Light

The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board.


Recessed-Mount Light

Recessed mount light

Recessed-mount trailer lights install underneath a grommet (A45GB - sold separately). These lights will extend into the mounting surface and require that a hole be cut into your trailer.



STL23R24B Optronics Miro Flex 24V LED Trailer Tail Light - Stop/Turn/Tail - Submersible - 12 Diodes - Round - Red Lens

Alternate part number: STL-23R24B




California residents: click here



Customer Reviews

Miro-Flex LED Trailer Tail Light - Stop/Turn/Tail - Submersible - 12 Diodes - Round - Red Lens - 24V - STL23R24B

Average Customer Rating:  4.5 out of 5 stars   (11 Customer Reviews)

4-5/16" Diameter x 2-3/8" deep. Waterproof trailer light serves as a stop, turn, and tail light. Miro-Flex faceted reflector increases light output. Flush mount with required grommet (sold separately). Accepts standard 3-prong plug.

- STL23R24B
by:

Fantastic Lights, will continue to order them. No confusion if they will run on 24v with the plain sticker on the back clearly labeling 12/24V. Different brand turn signal keeps getting water logged on same vehicle, this light has been rock solid! Thanks Jason V. for the 12v or 24v hint.



- STL23R24B
by:

purchased four lights to upgrade from the old bulb style. They have performed well without trouble except for one that has lost a couple of led lights - thought they should have lasted better than that but way ahead of what I was using.



- STL23R24B
by:

Received late last evening and everything in the package looks to be what we ordered. They will not be installed for most of 6 months as we are wintering in Florida. Service was very good. Pleased. Lights look good. Thank you.



- STL23R24B
by:

Ordering was easy, found the info I needed on these lights on the etrailer site from a prior question someone else had asked. The tech info available on the etrailer website is the best.



- STL23R24B
by:

Items are of good quality and arrived quickly. The correspondence from the retailer was good and I'll most likely purchase again



- STL23R24B
by:

These are good lights. Love (and require) that they run on 24 volts as well as 12. This is the only place I can find them, but they are a good price, with fast cheap shipping so I would get them here anyway. Thanks!



- STL23R24B
by:

Good light. Used in ElDorado National bus, which uses 24 volt lights. This was about the only place I could find them. Thanks!!!



- STL23R24B
by:

Excellent pricing much better than the dealer for the same thing. Good customer service



- STL23R24B
by:

Very satisfied



- STL23R24B
by:



- STL23R24B
by:

They look good! And affordable too!


11
11

Ask the Experts about this Optronics Trailer Lights

  • How to Get LED Lamp # STL23R24B into # A45GB Grommet
    I went out to the warehouse and pulled both the lamp you mentioned, part # STL23R24B and the grommet, # A45GB. As you can see in the short video we produced for you, the parts do indeed fit together. The fit is kind of tight, and you will need to start the lamp into the grommet and then work your way around stretching the grommet into place around the lamp. Soaking the grommet in hot water for a few minutes will soften it a bit and make it more pliable. You can also try lubricating...
    view full answer...
  • Installing Trailer Wiring on a 24V System of a Military Hummer --1987 M998 hmmwv
    I've attached an article as well as a photo to assist, but you will need to add a step down converter between your light functions, and add a 24V relay between the cold side of your brake light switch for your brake controller if you will be using electric brakes on the trailer. There isn't an easy wiring harness with this converter already installed, so I recommend you use the Curt Vehicle Wiring Harness with 4-Pole Flat Trailer Connector - 60" Wire Lead # C58044 (you will need to get...
    view full answer...
    Image 1 for
  • 4 inch Round 24 Volt Trailer Clearance Light
    For a 24 volt version of the light you referenced you would want the part # STL23R24B as this light can be used on a 24 volt circuit.
    view full answer...
  • LED Taillight Recommendation for a 1968 Heilite Trailer
    We have exactly what you need, but the # 294-0967 is for tow bar lighting for vehicles that are getting flat towed so it wouldn't be a good choice for you. For a similar light to what you have on your trailer that would be LED I would recommend the # STL23R24B. For a wiring harness you would want the # A45PB. For a mounting flange you would want the # A45BB.
    view full answer...
    Image 1 for
  • 24 Volt Trailer Taillight Availability
    We have a few different trailer taillights that are compatible with 24 volt systems. For a red light you would want the # STL23R24B, for an amber one similar you would want part # STL23A24B and for a clearance light # MCL66A24B.
    view full answer...
  • 24 Volt Compatible 4 inch Diameter Trailer Clearance Light Recommendation
    You'd need the part # STL23R24B for red and then # STL23A24B for amber. These are 24 volt compatible lights very similar to the one you referenced. For a mounting ring you then would want the part # A45BB.
    view full answer...
  • What are the Wire Functions for Pig Tail Wiring Harness for Optronics LED Tail Light STL23R24B
    For tail light # STL23R24B you should be using wiring harness # A47PB which has the following functions: White is ground and will attach to truck frame Red is turn signal/brake lights and will connect to yellow wire on left side and the other light red wire will connect to the green wire for the right side Black is running lights and will connect to the brown wire. The one running light wire will go to one of the lights. Then you will splice in a jumper wire from one light to the...
    view full answer...
  • Dimensions of the Base of the Miro-Flex LED Trailer Stop/Turn/Tail Light # STL23R24B
    The picture you submitted didn't make it through unfortunately, but I did attach a dimensional picture of the # STL23R24B that shows the overall dimensions from the widest point of the assembly. The width of the assembly behind the lens is 4-1/8 inches. The overall diameter is 4-5/16 inches. I believe this is the measurement you are looking for. For a rubber grommet to install this light you would want the part # A45GB. For a pigtail harness you would want the A47PB.
    view full answer...
    Image 1 for
  • Availability of Trailer Clearance Light that Can be Used with 12 or 24 Volt Power
    We have the round trailer clearance light part # STL23R24B which can be used with 12 or 24 volt power systems.
    view full answer...
  • Trailer Lights Available for a 24V System
    We do have a handful of 24V trailer light options, but the Optronics Sealed, Flush Mount Tall Rectangle LED Trailer Stop, Turn, and Tail Light, Grommet, and Plug # STL34RB is a 12V light, not a 24V trailer light. For taillights, we have the Miro-Flex LED Red # STL23R24B, Miro-Flex LED Amber # STL23A24B, and Transit Tail Light LED Red Lens # STL90R24B. For clearance lights we have the Thin-Line LED Trailer Clearance/Side Marker Light, Red # MCL66R24B and Thin-Line LED Trailer Clearance/Side...
    view full answer...
  • Can a Bus with a 24 Volt Electrical System Tow a Trailer and Car with 12 Volt Electrical Systems
    On the trailer it will be easy because you can add 24 volt lights such as # STL23R24B and # MCL66A24B just to name a few. But to flat tow a vehicle that is a different story. You would need to obtain a voltage reducer device and put one on each circuit ahead of the trailer connector so that it is 12 volts on the output side. We do not carry these devices and from what I know they can be expensive. If you go this route then the trailer would not have to have 24 volt lights.
    view full answer...
  • Replacement 4 Inch by 2 Inch Round Tail Light for a 2006 Damon Intruder RV
    The closest match we have to your existing Glo-Brite taillight is the Sealed, 4 inch Round LED Trailer Stop, Turn and Tail Light, Flush Mount, 3-Function, 12 Super Diode, # STL23R-24B. It measures 4 inches in diameter and 1-15/16 inches deep. To install this light, you would also need Rubber Grommet for 4 inch Round Trailer Tail Lights, # A45GB, and Straight 3-Wire Pigtail for Sealed Trailer Stop, Turn and Tail Lights, # A45PB. Since this light is an LED, if you determine that it is...
    view full answer...
  • Recommendation for 24 Volt Trailer Lights
    We do have some lights that are designed to work on a 24 volt system but none that are available in a kit. I recommend using light # STL23R24B. There are a few ways to mount this light. You can use a grommet and flush mount it using # A45GB. Or you can surface mount it with a bracket, # BK45BB. You will also use a wiring harness, # A47PB.
    view full answer...
  • 24 Volt Trailer Light Availability
    We have a few 24 volt compatible lights but not the part # TLL9RK. I recommend using light # STL23R24B. There are a few ways to mount this light. You can use a grommet and flush mount it using # A45GB. Or you can surface mount it with a bracket, # BK45BB. You will also use a wiring harness, # A47PB.
    view full answer...
  • Availability of 24-Volt Tail Lights for Lowboy Trailer
    We do have some trailer tail lights designed to work on a 24-volt system. I recommend using light # STL23R24B. There are a few ways to mount this light. You can use a grommet and flush mount it in a 4-1/2 inch cutout using # A45GB. Or you can surface mount it with a bracket, # BK45BB. You will also use a wiring harness, # A47PB. These parts only come in red.
    view full answer...
  • Replacement Tail Light Recommendation for a 2006 Damon Trailer
    All I really can say is that based on the measurements a previous customer of ours submitted about the tail lights that are on their 2006 Damon trailer the closest replacement we can offer is the Miro-Flex LED Trailer Stop/Turn/Tail Light # STL23R24B. It measures 4 inches in diameter and 1-15/16 inches deep. To install this light, you would also need Rubber Grommet for 4 inch Round Trailer Tail Lights, # A45GB, and Straight 3-Wire Pigtail for Sealed Trailer Stop, Turn and Tail Lights,...
    view full answer...
  • Option for Towing Trailer with 12 Volt Lights with 24 Volt Tow Vehicle
    I think your only real option would be to replace the trailer lights on your trailer with lights that are compatible with 24 volt systems since there isn't an adapter available that we offer that would work for converting your 24 volt system to work with a 12 volt lighting system. Right now, we have a few select 24 volt tail lights. We have # STL23R24B and # STL90R24B. For turn/marker lights we have # STL90A24B and # STL23A24B. And for reverse lights we have # BUL23C24B and # BUL90C24B.
    view full answer...
  • 24 Volt Trailer Light Availability
    The Light Assembly part # TLL28RK that you referenced is only compatible with 12 volt circuits. We have a couple trailer lights that are compatible with 24 volt circuits though. Check out the part # STL23R24B, # STL90R24B, # MCL55R1224B, or # SLL43AB2.
    view full answer...
  • Is Optronics Trailer Light 12 or 24 Volt
    The Sealed, 4 inch Round Trailer Stop, Turn and Tail Light, part # ST45RB is designed to work with a 12 V system. I have attached a product review video for this light you can check out. This light accepts the 3-prong connector like part # A45PB. The grommet used with this light is part # A45GB and is sold separately. For a 4 inch light that is designed for a 24 volt system I recommend part # STL23R24B.
    view full answer...
  • Converting a Trailer with 12 volt Lights to 24 volt Lights for Compatibility with a Euro Spec Truck
    I think your only real option would be to replace the trailer lights on your trailer with lights that are compatible with 24 volt systems since there isn't an adapter available that we offer that would work for converting your 24 volt system to work with a 12 volt lighting system. Right now, we have a few select 24 volt tail lights. We have # STL23R24B and # STL90R24B. For turn/marker lights we have # STL90A24B and # STL23A24B. And for reverse lights we have # BUL23C24B and # BUL90C24B.
    view full answer...
  • Is the Optronics Trailer Light # ST45RB 12 or 24 Volt
    The Sealed, 4 inch Round Trailer Stop, Turn and Tail Light, part # ST45RB is designed to work with a 12 V system. I have attached a product review video for this light you can check out. This light accepts the 3-prong connector like part # A45PB. The grommet used with this light is part # A45GB and is sold separately. For a 4 inch light that is designed for a 24 volt system I recommend part # STL23R24B.
    view full answer...
  • Recommended 24 Volt Compatible Trailer Lights for Utility Truck
    We do have some 24 Volt lights, but the Blazer Trailer Tail Light - 6 Function - LED - Submersible # C7493RTM is only for 12 Volt systems. Here are some 24 Volt options: Miro-Flex LED Trailer Stop/Turn/Tail Light - 12 Diode, 24 Volts - 4" Round - Red # STL23R24B Miro-Flex LED Trailer Parking/Turn Signal - 16 Diode, 24 Volts - 4" Round - Amber # STL23A24B
    view full answer...
  • Can the Optronics Sealed, Miro-Flex Trailer Clearance Trailer Light Be Used as a Brake Light
    The 3 diodes in the Miro-flex light, # MCL51RB, would not make a very good brake light. They would not be as bright as the regular brake lights already on the trailer. You would need a light designed to function in whole or in part as a brake light such as # STL23R24B. With this light you would also need a wiring harness, # A47PB. To mount it you could use mounting bracket, # BK45BB and grommet # A45GB. You could also flush mount it using the mounting flange # A45BB.
    view full answer...
  • Trailer Lights for 12 Volt and 24 Volt Systems on a 1994 Mercedes G Wagon and Honda CR-V
    Some trailer lights can be used on either a 12 volt or 24 volt system, but # STL16RB is not one of them. You could use # STL23R24B with harness # A47PB, grommet # A45GB, bracket # BK45BB for a 24/12 volt system and it would work with both vehicles.
    view full answer...
  • Recommended LED Trailer Tail Lights for 24 Volt Military Truck
    The trailer tail light I recommend that is compatible with a 24 volt electrical system is the Miro-Flex LED Trailer Tail Light part # STL23R24B which has stop, turn, and tail signals. If you would like to add reverse lights as well then you can use the LED Backup Light part # BUL11CM24B. We do not have an all in one set of trailer lights that are compatible with a 24 volt electrical system. Unfortunately, most of our trailer lights are only compatible with a 12 volt electrical system...
    view full answer...

Do you have a question about this Trailer Light?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer lights for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer light information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Andrew K
Video by:
Andrew K
Employee Tyler C
Written by:
Tyler C
Employee Adele M
Updated by:
Adele M
Employee Wilson B
Updated by:
Wilson B
Employee Brian T
Updated by:
Brian T
Employee Kathleen M
Video Edited:
Kathleen M
Employee Cole B
Installed by:
Cole B
Employee Shane T
Installed by:
Shane T

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.