Use integrated switch or wire to a light switch to turn this double dome light on and off. Perfect for brightening up your RV kitchen when doing dishes or your enclosed trailer when loading gear. ... To access the bolt holes, pull the lenses up and away from the housing. Do not use any tools to remove the lenses, as they will crack. Then, using hardware (not included), bolt the housing onto the ceiling, wall, or cabinet before re-installing the lenses.
18" Long x 2-1/8" tall x 1-1/16" thick. Low-profile LED strip light produces bright white light. Awning design directs light downward at a 45-degree angle. Polished chrome housing. Surface mount - hardware not included. 2-Wire design.Features: Low-profile LED strip light produces bright white light Awning design directs light downward at a 45-degree angle Polished chrome housing provides a clean look Sealed, waterproof housing and lens unit LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate lens Clear lens with white LEDs Compatible with 12V DC systems Surface mounts to a flat surface with wedge base - hardware not included 2-Wire design - includes ground wire and lead wire for power Specs: Overall dimensions: 18" long x 2-1/8" tall x 1-1/16" thick Interior strip light length: 16" Distance between mounting holes (center on center): 11-1/8" Hole diameter: 3/16" Light output: Effective lumen output: 252 lumens Raw lumen output: 360 lumens Diodes: 18 Power draw at 12.8V: 0.3 amps Lifetime warranty on LEDs Note: Not recommended for use in fully exposed outdoor locations.
4" Long x 1-9/16" tall x 2-5/8" deep. Incandescent trailer light illuminates your license plate. Black polycarbonate housing has a built-in bracket for surface-mount installation. 2-Wire pigtail with power and ground wires. ... Features: Light angles down to illuminate your trailer's license plate Black polycarbonate housing Clear lens Incandescent bulb is replaceable Mounts on surface of trailer with built-in ear-mount bracket 2-Wire pigtail with power and ground wires Specs: Dimensions: 4" long x 1-9/16" tall x 2-5/8" deep Mounting hole dimensions (center to center): 3-7/16" Bulb type: 194 wedge Power draw at 12.8 volts: 0.2 amps 3-Year warranty License light is a direct replacement for: Uni Bond LP1001 Truck Lite 26336 Grote 60251 Bargman 30-30-002
2-3/4" x 1-3/8" Rectangle. Low-profile LED trailer light with chrome-plated polycarbonate housing illuminates your license plate. Surface mount with foam gasket - hardware included. 2-Wire design.Features: Compact LED light illuminates your trailer's license plate LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Snap-on chrome-plated polycarbonate housing Clear lens over white LEDs Surface mount with foam gasket - hardware included 2-Wire design includes power lead and ground wire DOT approved when properly mounted Requires single light mounted at trailer center, or 2 lights mounted on each side Specs: Quantity: 1 license plate light Overall dimensions: 2-3/4" long x 1-3/8" wide x 1" deep Distance between mounting holes (center on center): 2" Diodes: 2 Power draw at 12.8V: 0.027 amps Lifetime warranty on LEDs Manufacturer Cross Reference Light will work as an exact replacement for: Uni Bond # DL2020 Grote # 61501 Peterson # M434
4-1/2" x 2" Rectangle. Incandescent trailer light functions as a clearance and side marker light. Heavy-duty steel housing. Snap-on lens. Surface mount to trailer - hardware not included. 1-Wire design. ... Features: Incandescent trailer light functions as a clearance and side marker light when properly mounted Heavy-duty steel housing protects light Incandescent bulb can be easily replaced Snap-on acrylic lens over incandescent bulb Compatible with 12V DC systems Surface mount to trailer - hardware not included Included gasket creates a weathertight seal Single wire design grounds through mounting hardware PC rated Specs: Dimensions: 4-1/2" long x 2" wide x 1-1/2" thick Distance between mounting holes (center on center): Horiztonal: 3-7/8" Vertical: 13/16" Bulb type: 194 wedge base 3-Year warranty Manufacturer Cross Reference Light will work as an exact replacement for: Truck Lite # 26315Y Grote 45173 Peterson # M119A PC-Rated Lights A PC-rated light produces a 90-degree angle of light to either side of its centerline for a total of 180 degrees of coverage.
3" x 1-1/16" x 5/8". Low profile utility light provides bright white light. Great White series features custom-cut lens optics and ultra-bright white diode. Surface mount to trailer with included hardware. 2-Wire design.Features: Low profile utility light provides bright white light Great White series features custom-cut lens optics and ultra-bright white diode for increased light output LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable black plastic housing Clear lens over white LED Compatible with 12V DC systems Surface mount to trailer with included hardware 2-Wire design includes power lead and ground wire DOT compliant Made in the USA Specs: Dimensions: 3" long x 1-1/16" tall x 5/8" deep Distance between mounting holes (center on center): 2" Diodes: 1 10-Year limited warranty Surface-Mount Light Surface-mount trailer lights install using a flange or bracket with mounting holes.
According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…
I think the part #STL68RB would be perfect for your flatbed truck (looks good by the way). The dimensions of the this oval light are 10 inches long and 3 inches tall. They do stop/turn/tail/reverse light functions as well so you would be totally set.…
The Bulldog Jack part #BD182800 that you referenced was made in Mexico so it would work well for what you need. In the attached picture you can see "Made in Mexico" on the sticker label.
To retract the cable on your ToyLok Retractable Cable Lock #LC337120, extend it until no clicking sound is heard. If you notice dirt or moisture on the cable clean it before retracting. Allow the cable to retract back into the housing. It may be…
Hi Joe; just like the Curt #C96NR, the Draw-Tite Max-Frame Trailer Hitch Receiver #DT42GR does not allow for a 20" spare tire. However, we do have the Blue Ox Trailer Hitch Receiver #BLU46HR. I just reached out to Blue Ox and they said it will…
The 235/80-16 sizes tires are the closest size that we have to your 9.5-16.5 tires. Your current tires should have a diameter of 30.6" and the 235/80-16 tires measure 30.9" in diameter. When it comes to clearance with your trailer you will…
Yes, you can Dave! The best option to add a brake controller, with a plug in adapter, to your 2017 Toyota Tundra is to use the Redarc Tow-Pro Liberty Brake Controller w/ Custom Harness item #RED72CR. The Tow-Pro Liberty item #RED72CR is a…
The main reason people like oil bath hubs over grease hubs is the oil bath hubs have a less involved maintenance schedule than grease hubs. It is recommended to inspect and repack grease wheel bearings and seals every 12k miles. With oil bath hubs,…
The Taskmaster Radial Trailer Tire - Load Range G, item #TTWPRG235R16, is the closest tire to the 7.50-16LT tire that we have. Your tire has an overall height of 31.8 inches and a section width of 8.4 inches. The #TTWPRG235R16, tire has and overall…
Hey Eric, thanks for reaching out! The Kodiak Disc Brake Kit #K2HR526D you're looking at is the best setup when combined with the Hydrastar Electric-Hydraulic Actuator w/ Line Kit #CAR-HBA16-2 in that answer page you referenced. If you were to…
We carry many fenders, though we do not have a list of parts specific to any type of trailer. I have added a link for you to each of our available fenders to take a look at. You will need to know the size of your tires as well as the length of fender…
2-3/4" x 1-7/8" x 2". Waterproof trailer light illuminates your license plate. Clear lens under polycarbonate housing. Surface mount on 1-3/4" centers with included studs. 2-Wire design with 0.180 female barrels. ... The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board.
1-1/2" Diameter round. Waterproof trailer light with chrome-plated brass housing illuminates your license plate. Easy, snap-in installation. 2-Wire pigtail includes lead and ground wires. ... The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board.
Use integrated switch or wire to a light switch to turn this single dome light on and off. Perfect for brightening up your RV kitchen when doing dishes or your enclosed trailer when loading gear. ... To access the bolt holes, pull the lens up and away from the housing. Do not use any tools to remove the lens, as it will crack. Then, using hardware (not included), bolt the housing onto the ceiling, wall, or cabinet before re-installing the lens.
Waterproof LEDs in this dome light are vibration-resistant when driving over rough roads to the campsite. Recesses into the ceiling of your RV for a sleek, low-profile look and wires to a light switch so you can easily turn the light on and off.And the sonically sealed housing and lens are waterproof so water won't leak in and damage the LEDs. LEDs are more energy efficient, last longer, and burn brighter than lights with incandescent bulbs.
Energy-efficient LEDs in this dome light are vibration-resistant when driving over rough roads to the campsite. Wires to a light switch in your RV so you can easily turn the light on and off when you need to do the dishes after dinner.Using hardware (not included), bolt the housing onto the ceiling, wall, or cabinet. The included white trim flange covers the bolt holes to provide a clean, finished look. The light wires to a switch inside your RV and hooks up to ground (white wire) and power (black wire).
1-1/2" Diameter round. LED trailer light illuminates your license plate. Great White series features custom-cut lens optics and ultra-bright white diodes. Durable chrome-plated steel housing. ... Features: Compact LED light illuminates your trailer's license plate Can also be used in utility courtesy light applications Great White series features custom-cut lens optics and ultra-bright white diodes for increased light output LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Chrome-plated steel housing protects top half of light White lens over white LED Compatible with 12V DC systems Simple, snap-in installation Requires 1-1/4" diameter hole for mounting 2-Wire pigtail - includes power lead and ground wire DOT compliant Requires two lights (2nd light sold separately) if mounting to either side of license plate Specs: Dimensions: 1-1/2" diameter x 2-1/8" deep Diodes: 4 Power draw at 12V: 0.02 amps 10-Year limited warranty
4-1/2" x 2" Rectangle. Incandescent trailer light functions as a clearance and side marker light. Heavy-duty steel housing. Snap-on lens. Surface mount to trailer - hardware not included. 1-Wire design. ... Features: Incandescent trailer light functions as a clearance and side marker light when properly mounted Heavy-duty steel housing protects light Incandescent bulb can be easily replaced Snap-on acrylic lens over incandescent bulb Compatible with 12V DC systems Surface mount to trailer - hardware not included Included gasket creates a weathertight seal Single wire design grounds through mounting hardware PC rated Specs: Dimensions: 4-1/2" long x 2" wide x 1-1/2" thick Distance between mounting holes (center on center): Horiztonal: 3-7/8" Vertical: 13/16" Bulb type: 194 wedge base 3-Year warranty Manufacturer Cross Reference Light will work as an exact replacement for: Truck Lite # 26315R Grote 45172 Peterson # M119R PC-Rated Lights A PC-rated light produces a 90-degree angle of light to either side of its centerline for a total of 180 degrees of coverage.
Some jobs don't wait for daylight. This light floods your work area so you can see what you're doing and get it done right. It bolts on, aims where you need it, and stays dependable through weather, heat, and long nights on the job.Highlights See Your Whole Work Area: 8,500 lumens from 297 LEDs brighten a wide zone so you can work with confidence. Aim Light Where You Need It: Built-in 30 tilt directs the beam without extra brackets or adjustments. Holds Up on Tough Jobs: Sealed aluminum housing handles weather, heat, and constant vibration.
4-1/2" x 2" Rectangle. LED trailer light serves as either a side marker light or clearance light when properly mounted. Durable steel housing protects light. Surface mount to trailer. 2-Wire design. ... Features: LED trailer light functions as either a clearance light or side marker light when properly mounted Durable die-cast steel housing protects the light against damage LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Amber lens over white LEDs Compatible with 12V DC systems Surface mounts on trailer - hardware not included 2-Wire design includes power lead and ground wire PC rated Specs: Dimensions: 4-1/2" long x 2" wide x 1-1/2" thick Distance between mounting holes (center on center): 3-7/8" Diodes: 6 Power draw at 12.8V: 0.20 amps Lifetime warranty on LEDs PC-Rated Lights A PC-rated light produces a 90-degree angle of light to either side of its centerline for a total of 180 degrees of coverage.
Use integrated switch or wire to a light switch to turn this double dome light on and off. Included 2 incandescent bulbs are perfect for brightening up your RV kitchen when doing dishes or your enclosed trailer when loading gear.Surface-Mount, Bolt-On Installation is Easy This surface-mount dome light is incredibly easy to install as an upgrade or direct replacement of your existing light. To access the bolt holes, slide the lenses off the housing.
Need bright interior lighting for your space? This single dome light provides wide, even illumination with an optic lens and a built-in switch for easy control. ... Features: Single dome light designed to provide interior illumination Optic lens helps distribute light evenly across a wide area Incandescent lighting for consistent performance Built-in switch allows easy on and off control 180-Degree beam angle for broad light coverage White housing for a clean, standard look Easy installation for quick setup Includes 1 dome light Specs: Voltage: 12V Wattage: 18 watts Lumens: 264 Beam angle: 180 degrees Dimensions: 5" x 8" Light type: Incandescent
4-1/2" x 2" Rectangle. LED trailer light serves as either a side marker light or clearance light when properly mounted. Durable steel housing protects light. Surface mount to trailer. 2-Wire design. ... Features: LED trailer light functions as either a clearance light or side marker light when properly mounted Durable die-cast steel housing protects the light against damage LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Red lens over white LEDs Compatible with 12V DC systems Surface mounts on trailer - hardware not included 2-Wire design includes power lead and ground wire PC rated Specs: Dimensions: 4-1/2" long x 2" wide x 1-1/2" thick Distance between mounting holes (center on center): 3-7/8" Diodes: 6 Power draw at 12.8V: 0.20 amps Lifetime warranty on LEDs PC-Rated Lights A PC-rated light produces a 90-degree angle of light to either side of its centerline for a total of 180 degrees of coverage.
8-7/8" x 2-7/8" x 2-1/4". Incandescent trailer light illuminates your trailer's license plate. Vibar socket absorbs road shock and vibration. Surface mounts to trailer with powder-coated steel bracket. 1-Wire design. (1) 168 bulb.Features: Compact light illuminates your trailer's license plate Vibar socket absorbs road shock and vibration to prolong bulb life Incandescent bulb can be easily replaced Durable ABS housing and polycarbonate lens Clear lens over incandescent bulb Compatible with 12V DC systems Surface mount to trailer with powder-coated mounting bracket - hardware not included Single wire design grounds through mounting hardware Made in the USA Specs: Dimensions: 8-7/8" long x 2-7/8" wide x 2-1/4" thick Distance between mounting holes (center on center): 3-1/2" Bulb type: 168 Power draw at 12V: 0.35 amps Limited 1-year warranty Surface-Mount Light Surface-mount trailer lights install using a flange or bracket with mounting holes.
Use integrated toggle switch or wire to a light switch to turn this double dome light on and off. Included 2 incandescent bulbs are perfect for brightening up your RV kitchen when doing dishes or your enclosed trailer when loading gear.Surface-Mount, Bolt-On Installation is Easy This surface-mount dome light is incredibly easy to install as an upgrade or direct replacement of your existing light. To access the bolt holes, slide the lenses off the housing.
Use the integrated switch to turn this waterproof single dome light on and off. Perfect for brightening up your RV kitchen when doing dishes or your enclosed trailer when loading gear. LEDs last longer and burn brighter than incandescents.The light has a 2-wire design that hooks up to ground (white wire) and power (black wire). Once you're finished, you can then turn the lights on and off using the integrated toggle switch on the light's housing.
4" x 2" x 1-15/16". Waterproof LED trailer light illuminates your license plate. Stainless steel mounting base. Durable polycarbonate lens and housing. Surface mount to trailer - hardware not included. ... The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board.
Use integrated toggle switch or wire to a light switch to turn this single dome light on and off. Included incandescent bulb is perfect for brightening up your RV kitchen when doing dishes or your enclosed trailer when loading gear.Surface-Mount, Bolt-On Installation is Easy This surface-mount dome light is incredibly easy to install as an upgrade or direct replacement of your existing light. To access the bolt holes, slide the lens off the housing.
4-1/2" x 2-3/16". Incandescent trailer light serves as a clearance and side marker light. Vibar socket absorbs road shock and vibration. Durable steel housing. Surface mount - hardware not included. 1-Wire design. ... Features: Incandescent trailer light functions as a clearance and side marker light when properly mounted Flat-back design mounts without disassembly Durable bright-plated steel housing protects light Vibar socket absorbs road shock and vibration to prolong bulb life Incandescent bulb can be easily replaced Amber lens over incandescent bulb Compatible with 12V DC systems Surface mount to trailer - hardware not included Can be spot-welded to side rails and truck bed rails Single wire design grounds through mounting hardware DOT compliant PC rated Made in the USA Specs: Dimensions: 4-1/2" long x 2-3/16" tall x 1-1/4" thick Distance between mounting holes (center on center): 3-3/8" Bulb type: 168 Power draw at 12V: 0.35 amps 1-Year limited warranty Manufacturer Cross Reference Light will work as an exact replacement for: Optronics # MC82AB Truck Lite # 20309Y Grote # 45173 PC-Rated Lights A PC-rated light produces a 90-degree angle of light to either side of its centerline for a total of 180 degrees of coverage.
Filters
