Towing? There's an app for that. This brake controller connects to your phone with Bluetooth so all your settings are right in your hand. The unit plugs into your 7-way for a one-step installation with no wiring.You may also need to adjust the sensitivity based on your own preferences, or when the trailer load or road conditions change. 5. Vehicle Hazard Lights If you turn on your vehicle's hazard lights, there's a chance the trailer brakes will pulse on and off as the lights flash.
Your coach is hooked up or the trailer's loaded, but the lights aren't working and there is no time to fix wiring. This wireless, battery-powered kit mounts with magnets and gives you stop, turn, and tail lights without a permanent install.
Waterproof trailer light kit includes 2 combination tail lights that serve 7 functions on trailers under 80" wide. Stud mount with stainless steel hardware and included license plate bracket. 25' wiring harness with 4-pole connector.
This aluminum tow bar is the absolutely snazziest tow bar you can get. Sleek, lightweight, with built-in LEDs for increased visibility and safe driving at night. The electrical cord comes installed in the cable guide, keeping your setup organized.These built-in LEDs don't just look dope - they're great for safety too, especially when you're driving at night. They light up the space between your RV and your toad (towed vehicle) and alert other drivers to the fact that you're towing a vehicle behind your RV.
7-9/16" x 3-5/16" Oval. Waterproof LED trailer tail lights function as stop, turn, and tail signal lights when properly mounted. Durable polycarbonate housing and lens. Reccessed mount with grommet. Accepts included standard 3-prong plugs.
This is one of our favorite brake controllers, with flawless braking and a tiny dash knob that looks like it came straight from the factory. It's so easy to adjust your settings or activate manual override.You don't need to have a trailer connected for it to calibrate; the only difference is that the knob won't illuminate at all. If your trailer is connected, the LEDlight will flash green/blue as it calibrates.
This is one of our favorite brake controllers, with flawless braking and a tiny dash knob that looks like it came straight from the factory. It's so easy to adjust your settings or activate manual override.You don't need to have a trailer connected for it to calibrate; the only difference is that the knob won't illuminate at all. If your trailer is connected, the LEDlight will flash green/blue as it calibrates.
This hitch-mounted cargo carrier tilts away from your vehicle - with gear loaded - for easy cargo area access, and it folds up for storage when not in use. The spacious basket has side rails that help contain your cargo and provide tie-down points.
Get safe, smooth braking for your towed car with this truly proportional braking system. Car slows perfectly in sync with your RV. Installs permanently so you can just plug in and go. Low-profile design keeps it out of sight and out of the way.This indicator, however, connects directly to a reed switch on the actuator so it only lights up when the pedal is depressed. If there's a strong glare on your toad's windshield, the LEDlight strip might be hard to see.
This is one of our favorite brake controllers, with flawless braking and a tiny dash knob that looks like it came straight from the factory. It's so easy to adjust your settings or activate manual override.You don't need to have a trailer connected for it to calibrate; the only difference is that the knob won't illuminate at all. If your trailer is connected, the LEDlight will flash green/blue as it calibrates.
This is one of our favorite brake controllers, with flawless braking and a tiny dash knob that looks like it came straight from the factory. Its unique off-roading mode helps you handle rough conditions, so get out there and get towing.You don't need to have a trailer connected for it to calibrate; the only difference is that the knob won't illuminate at all. If your trailer is connected, the LEDlight will flash green/blue as it calibrates.
8-1/16" x 2-7/8" Rectangle. Waterproof lights act as brake, tail, turn, side marker, side reflex, rear clearance, rear reflex, and license plate light for trailers. Surface mount - hardware included. 3-Wire pigtail. 25' Wiring harness.
Premium rack has arms that deploy with the tap of a lever, making loading and unloading bikes almost effortless. Arms hold your bikes securely by the wheels. Built-in LEDs use your vehicle's 4-way plug to sync with your brake lights.To return it to the upright position, pull up on the lever and raise the rack until it clicks into position. Built-In Brake Lights and Turn Signals To keep you visible and safe, the Piston Pro X has built-in LED brake lights and turn signals. The lights are powered via the built-in wiring harness that plugs into your vehicle's existing 4-way connector.
Waterproof trailer light kit includes 2 combination tail lights that serve 7 functions on trailers under 80" wide. Universal mount with stainless steel hardware and included license plate bracket. 25' wiring harness with 4-pole connector.
Great for cars and trailers with either LED or incandescent bulbs, this kit converts your vehicle's lighting system to match your trailer's. It includes a 4-way flat, wire taps, and a power wire that pulls power directly from your battery.Features: Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights Compatible with 5-pole, 6-pole, and 7-pole adapters (sold separately) Ensures that your vehicle's wiring matches that of your trailer Avoids overloading your vehicle's electrical system by connecting directly to your battery Power wire and fuse kit included Designed with safety in mind Guards against electrical shorts, mis-wire situations, and electrostatic discharge Splices into your vehicle's wiring with the included quick-splice connectors Color-coded wires ease installation Resists damage from shock and vibration for superior operation on rough roads Circuit board is constructed using surface-mount technology (SMT), an improvement over through-hole construction Includes durable, molded-rubber, female output socket with protective dust cover Specs: Application: Vehicles with 2-wire or 3-wire electrical systems Trailers and vehicles with LED or incandescent lights 4-Way harness length: 58" Splice-in wire length: 17" Ground wire length: 17" Power wire length: 20' Maximum amperage: Turn lights and brake lights: 3 amps per circuit Tail lights: 3 amps per circuit Wire gauge: Power wire: 12 Limited 1-year warranty Do I Need A Tail Light Converter?
We love that the Reese cargo carrier is ready to install in your hitch, out of the box - just add straps and you're good to hit the road. It also has tail light cutouts so it's easy to upgrade for all your adventures in the years to come.
Plug in and go: this permanent system gets you smooth, reliable braking with a one-and-done installation. Low-profile components stay out of sight. Includes convenient wireless Coachlink.Your car will break evenly and naturally as it's being towed, so there's less risk of damage. Built-In Safety Features Included in this kit is the wireless Coachlink for safety and peace of mind. This monitor, sitting on the dashboard of the RV, will light up and beep whenever your toad is actively braking.
Get safe, smooth braking for your towed car with this truly proportional braking system. Installs permanently so you can just plug and go. Low-profile design keeps it out of sight and out of the way. Includes convenient wireless braking monitor.You just connect your electrical cord and jumper hose and you'll be ready to go. Built-In Safety Features Included in this kit is the wireless Coachlink for safety and peace of mind. This monitor, sitting on the dashboard of the RV, will light up and beep whenever your toad is actively braking.
This 17' LED light strip has a weatherproof exterior that makes it perfect for indoor or outdoor use. 300 Diodes produce a bright white light. Cut-to-fit installation with peel-and-stick adhesive backing. Hardwires to any 12V power source.
This is one of our favorite brake controllers, with flawless braking and a tiny dash knob that looks like it came straight from the factory. Its unique off-roading mode helps you handle rough conditions, so get out there and get towing.You don't need to have a trailer connected for it to calibrate; the only difference is that the knob won't illuminate at all. If your trailer is connected, the LEDlight will flash green/blue as it calibrates.
This is one of our favorite brake controllers, with flawless braking and a tiny dash knob that looks like it came straight from the factory. It's so easy to adjust your settings or activate manual override.You don't need to have a trailer connected for it to calibrate; the only difference is that the knob won't illuminate at all. If your trailer is connected, the LEDlight will flash green/blue as it calibrates.
Think of it as a one-time project that pays off on every trip. Once the Shadow 2 braking system is installed under the hood, you hook up, check your monitor, and drive away with the peace of mind that your towed vehicle is stopping safely behind you.If the toad and RV become disconnected, the cable will pull the pin out of the switch and trigger the braking system. Addtional safety features include 3 LEDlights on the Shadow 2 box that provide specific information about the status of the breaking system, and visual and auditory alerts from the Bullseye monitor.
Complete the Safe Haul factory prep package on your 2019 or newer Spartan motorhome so you can flat tow your vehicle with the Air Force One supplemental braking system. Includes an air jumper hose with the Safe Haul-specific fitting.Either way, you shouldn't have to do any drilling to get the air line hooked up. Built-In Safety Features Included in this kit is an LED indicator light for safety and peace of mind. This LED, mounted in the toad (on the dash or on the back of the rearview mirror) and visible in your RV's backup camera, will light up whenever your toad is actively braking.