Race provides smooth surface for bearing to roll on inside of trailer hub. Works with L44643 and L44649 bearings. Replacement part uses industry-standard number.Features: Outer diameter: 1.980" Matching bearings (sold separately): L44643, L44649 L44610 Replacement Trailer Hub Race
This high-quality race lasts twice as long as other brands. Special alloy blend reduces vibration, extending the life of the race. Replacement part uses industry-standard number.
Hey Rick, thanks for reaching out. The #BK2-100 bearing kit is correct for your 3,500 lb axle with #84 spindle. Spindle sleeves are not included but we do have them available separately as part #BB60010 (1 pair). For that you'd need a 1-1/2"…
From the numbers you provided it sounds like you need replacement grease seals. In my research, the grease seals I found with the GS-1719DL number have a 1.72 inside diameter and 2.565 outside diameter. The replacement double lip grease seals you…
The UFP hub that you've referenced isn't made any longer I don't believe, but we do have some options for you. From some previous customers, we've determined that the UFP H-1062-3 axle has a spindle that has #L44649 inner and outer…
The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…
Just because the Timbren Axle-Less Trailer Suspension System #ASR1THDS02 has brake mounting flanges does not mean you have to run hub/drums on them. You can install idler hubs on the spindles just fine. For an idler hub that would fit the spindles…
We do have one axle with hubs that is extremely close to the dimensions you have requested. It is the CE Smith Trailer Axle w/ Idler Hubs item #CE33201GA-HUB. It measures 57-1/2" long, has a 46-1/2" spring center, and an 1,800 lbs capacity.…
A replacement tang-style spindle washer like part #5-101 is intended to be installed behind the castle nut and have its prongs bent down so that they prevent the castle nut from rotating on an E-Z Lube type spindle. The castle nut holds the washer in…
The key for selecting a replacement grease seal is the reference number, in this case #10-9. The manufacturer code does not matter. This is a single-lip seal with an inner diameter of 1.500-inches and an outer diameter of 1.987-inches. It is…
The spindle on your Dexter axle is going to be similar to the #84 E-Z Lube Spindle #TRU74FR in the image below. You can see there is a hole in the spindle where the grease will push through into your inner bearing. From there it will move along the…
Hey Glenn, thanks for all of the info on your current hub. From that we know that you have a 2,200 lb axle and the correct hub replacement would be the part #8-258-5UC1-EZ. This is also pre-greased so it's ready to be installed on your trailer.…
From the pictures you provided, you do indeed have a 5 on 5 bolt pattern. This isn't the most common bolt pattern though so if you were thinking about replacing the hubs as well, I do recommend swapping to the much more common 5 on 4 1/2 bolt…
Hey Rich, it sounds like you are looking for a 5 on 5 inch bolt pattern trailer hub which we do offer but only if the axle is a 3,500 lb axle. For a hub/drum we have the part #AKHD-550-35-EZ-K or for an idler hub you'd want the part…
Filters
