Perfect for campers, RV travelers, and anyone using a trailer, these jacks make life easier and more enjoyable. They're designed with comfort and convenience in mind, helping you save time and energy for what matters most - your journey.Features: Effortless Operation: Electric jack makes lifting and lowering your A-frame trailer quick and effortless Quiet Powered Drive: Operates quietly, eliminating the need for hand cranking Simple Controls: Top mounted on/off and retract/extend buttons ensure straightforward operation Weatherproof Buttons: Covered with a flexible, rubber-like boot to keep water out and protect the inside of the housing Easy Installation: Bolt-on design means no hassle, no headaches Easy Drop Leg Adjustment: Extends up to 4-1/2&uqot; for extra lift by pulling the pin.
Drop-leg jack stabilizes your lightweight cargo or camper trailer. Weld the bracket onto your trailer, pull the pin to lower the drop leg, and pin in place. ... Do not use this jack to lift your trailer or RV. Doing so will exceed the capacity of the jack.
This Dutton-Lainson sidewind swivel jack is a back saver when hitching and unhitching loaded trailers. The heavy-duty D-L tongue jack reduces the effort required to maneuver a trailer into hitching position or to remove the trailer from a vehicle.
This Dutton-Lainson sidewind swivel jack is a back saver when it comes to hitching and unhitching trailers. Silver finish.In fact, a jack with a higher lift capacity should operate more efficiently, allowing you to spend less time cranking and more time camping. Trailer and Camper Jack Lift Every jack offers a certain amount of lift or travel.
Coupler is made of sturdy steel with a durable, rust-resistant powder coat finish. QuickPin ensures fast, easy, secure hookup and disconnect - just drop the trailer tongue onto the ball, and slide in the pin.Features: A-frame coupler lets you hook up your trailer to your tow vehicle Provides connection point for hitch ball QuickPin design ensures simple, secure hookup and disconnect No jamming or complicated hinging components - just drop coupler over hitch ball and slide in the pin Lasso lanyard secures pin to coupler to avoid missing pieces Heavy-duty stamped steel construction Black powder coat finish offers excellent corrosion resistance Built-in jack-attachment point allows for quick, easy mounting of round utility jack Bolt-on or weld-on installation Hitch pin and clip included - hitch lock sold separately SAE J684 certified Specs: Application: 50-degree A-frame Ball size: 2-5/16" Weight capacity: 14,000 lbs Overall length: 14" Jack hole diameter: 2-1/4"
Bolt this trailer jack swivel mounting plate on your trailer's frame. Works with trailer jacks that need a 5/8" diameter swivel pin and have up to 3,500 lb weight capacity.Features: Bolts onto your trailer frame to provide a mounting point for your pipe mount swivel jack Can also be mounted by the axle to raise the side of the trailer for maintenance Works with jacks up to 3,500 lb capacity Includes 2 bolts and hardware Hardware fits trailer frames with a cross section depth of 3" or less Lock washer prevents vibration Durable steel construction with matte black powder finish and e-coat is corrosion resistant Specs: Mount dimensions: Outer diameter: 2" Pin hole diameter: 5/8" Length from plate: 2-1/2" Plate dimensions: 5" wide x 4-1/4" tall x 2" deep Weight capacity: 3,500 lbs Limited lifetime warranty
Just pull the easy-to-access pin on this jack to drop the entire jack tube down for quick, easy adjustment. No drop leg needed. Seven height settings offer up to 12" of drop. ... On a standard drop leg jack, the release pin is tucked away under the trailer frame. The release pin on this jack is conveniently located right above the mount for easy access.
Replaces the male pipe on your etrailer or Ram pipe-mount swivel jack. Pipe has an outer diameter of 2" and a pin hole diameter of 5/8".Features: Replaces the male pipe on your etrailer or Ram pipe-mount swivel jack Specs: Diameter: Outer: 2" Inner: 1-1/2" Pin hole: 5/8" Length: Longer edge to center of pin hole: 1-1/2" Shorter edge to center of pin hole: 3/4" Depth: 2-1/4"
Replaces the female pipe mount on your etrailer or Ram pipe-mount swivel trailer jack. 5/8" Pin hole diameter.Features: Replaces the female pipe on your etrailer or Ram pipe-mount swivel jack Specs: Diameter: Outer: 3" Inner: 2-1/2" Pin hole: 5/8" Length: Longer edge to center of pin hole: 1-5/8" Shorter edge to center of pin hole: 7/8" Depth: 2-1/2"
Perfect for campers, RV travelers, and trailer users, these jacks make adventures easier and more enjoyable. Designed for convenience and reliability, they save time and energy, so you can focus on what truly matters - your journey.Features: Effortless Operation: Electric jack makes lifting and lowering your A-frame trailer quick and effortless Quiet Powered Drive: Operates quietly, eliminating the need for hand cranking Simple Controls: Top mounted on/off and retract/extend buttons ensure straightforward operation Weatherproof Buttons: Covered with a flexible, rubber-like boot to keep water out and protect the inside of the housing Easy Installation: Bolt-on design means no hassle, no headaches Easy Drop Leg Adjustment: Extends up to 4-1/2&uqot; for extra lift by pulling the pin.
Plunger pin secures the drop leg on your etrailer or Ram square, direct-weld trailer jack with a 10,000-lb lift capacity. Includes spring and cotter pin.Features: Plunger pin secures the drop leg on your etrailer or Ram square, direct-weld trailer jack with a 10,000-lb lift capacity Designed for TJD-12000 Series jacks Assembly includes pin, spring and cotter pin
Replaces the mounting tube on your etrailer or Ram pipe-mount swivel jack. Pipe has an outer diameter of 2-1/2" and a pin hole diameter of 5/8".Features: Replaces the mounting tube on your etrailer or Ram pipe-mount swivel jack Designed for use with Ram TJP series jacks Specs: Diameter: Outer: 2-1/2" Inner: 2" Pin hole: 5/8" Length: Longer edge to center of pin hole: 1" Shorter edge to center of pin hole: 1" Depth of end without welded bracket: 2-3/8" Depth of end with welded bracket: 3-1/2" Bracket dimensions: Outer width: 2-3/4" Inner width: 2-1/4" Height: 3" Depth from bracket to outer weld: 2"
Replaces the female pipe mount on your etrailer or Ram pipe-mount swivel trailer jack. 9/16" Pin hole diameter.Features: Replaces the female pipe on your etrailer or Ram pipe-mount swivel jack Specs: Diameter: Outer: 2-1/2" Inner: 2" Pin hole: 9/16" Length: Longer edge to center of pin hole: 1" Shorter edge to center of pin hole: 3/4" Depth of end without welded bracket: 2-1/8" Depth of end with welded bracket: 3-1/4" Bracket dimensions: Outer width: 2-3/4" Inner width: 2-1/4" Height: 3" Depth from bracket to outer weld: 1-3/4"
Use any 18-volt or 24-volt cordless drill (not included) to power this side-mount jack. Removable hand crank included in case your drill gets drained. 700-Hour salt spray rating on the powder coat finish is ideal for boat or cargo trailers.Trailer Valet solves this issue by applying a rough powder coat finish on top of the zinc-nickel plated outer tube that's harder to scuff and scratch. Basically, by giving the jack a rougher "terrain," this finish helps keep the jack from aging too quickly. Not only is this jack weather resistant, but you can safely submerge it in saltwater!
Replacement pull pin fits your etrailer or Ram pipe-mount swivel jack. Includes 5/8" pull pin and chain. Designed for use with TJP-5001S, TJP-5002S, TJP-7001, and TJP-7001S Series jacks.Features: Pull pin assembly replaces the pull pin for your etrailer or Ram pipe-mount swivel jack Designed for use with TJP-5001S, TJP-5002S, TJP-7001, and TJP-7001S Series jacks Includes pull pin and chain Pin diameter: 5/8"
Step on the dual-pin foot lever on this heavy-duty jack to use the drop leg hands-free - makes up half the total travel. Best for gooseneck setups where you can step between the truck and trailer. ... Features: Easy-to-use foot lever faces the front - no more bending, squatting, or muddy knees Use the drop leg completely hands-free Drop leg extension makes up about half of the total travel Works best if you have open space between your trailer and your truck Heavy-duty internal components Durable jack screw allows for heavy lifting Twin thrust bearings make extending and retracting jack easy Black powder coated finish on inner and outer tubes Footplate minimizes sinking in soft ground Single speed gearbox is easy to maintain even in a long life of hard work Use the grease zerk fittings to help keep gears working smoothly Weld-on installation Includes footplate, handle, and connecting pin Specs: Lift capacity: 12,000 lbs Support capacity : 20,000 lbs Total travel: 26-1/2" Screw travel : 13-1/2" Drop leg travel : 13" Overall height (from bottom of foot to top of jack): Retracted: 29-1/2" Extended: 56" Outer tube width: 4-3/8" Inner tube width: 4" Footplate dimensions: 9" long x 9" wide Adjustment hole spacing on drop leg: 2-1/2" on center Jack screw diameter: 1-1/4" 1-Year warranty How to Determine the Support Capacity You Need in Your Landing Gear If you will be using this landing gear to lift and lower your trailer onto a hitch ball or kingpin, then you should choose the jack you need based on its lift capacity.
Applies your boat trailers free-backing drum brakes. Listen for the click on the eZ-Latch when coupling, and you'll never worry about highballing ever again. Made in the USA with heavy-duty, zinc-plated steel, and other corrosion-resistant parts.Built-In Theft Deterrent Unlike most couplers, which have a pin hole on the handle latch, the EZ-Latch coupler features a hole on the side of the coupler itself. Inserting a coupler lock through this hole will keep the latch from lifting, preventing disconnect and theft.
A-frame coupler features a wraparound yoke latch that catches to remain open while you position coupler over ball. Black powder coat finish provides strength and durability.Features: A-frame coupler lets you hook up your trailer to your tow vehicle Provides connection point for hitch ball Yoke latch makes it easy to clamp around ball Lift up and back on the latch to open Push forward and down to close Sturdy steel construction Black powder coat finish provides corrosion resistance Built-in jack-attachment point allows for quick, easy mounting of round utility jack SAE J684 certified Weld-on installation Specs: Ball size: 2" Jack hole diameter: 2-1/4" Overall dimensions: 13-3/4" long x 9-1/2" wide Pin hole diameter: 5/16" Minimum span needed for pin or pin lock: 1-1/4" Weight capacity: 8,000 lbs 1-Year warranty
The Equal-i-zer has a reputation as strong as its American-made steel. We love this hitch's solid build quality and that it helps to proactively stop trailer sway instead of just dampening it after it starts. Ball and shank included.To check if your truck and trailer are level, you'll need to hook up and release your tongue jack. If you find that the rear of your truck is still sagging, add washers to increase leverage. If it looks like too much weight has been taken off your truck's rear axle and is sitting on your front axle, try removing a few washers.
A-frame coupler features a thumb latch for safe, easy hookup. Simply push latch down and slide forward or back to open or close ball socket. Black powder coat finish provides durability and rust resistance.Features: 50-Degree A-frame coupler lets you hook up your trailer to your tow vehicle Provides connection point for hitch ball Thumb latch makes it easy to clamp around ball Push latch down and slide it back toward the trailer to open the ball socket Push latch down and slide it forward to close Sturdy steel construction Black powder coat finish provides corrosion resistance Built-in jack-attachment point allows for quick, easy mounting of round utility jack SAE J684 certified Weld-on installation Specs: Ball size: 2-5/16" Jack hole diameter: 2-1/4" Overall dimensions: 12-7/8" long x 10-7/8" wide Pin hole diameter: 5/16" Minimum span needed for pin or pin lock: 7/8" Weight capacity: 14,000 lbs 1-Year warranty
Pull the front-facing plunger pin on this heavy-duty jack to release the drop leg for 13-3/4" of lift in addition to the 15" of screw travel. Durable screw offers increased strength. ... Features: Heavy-duty utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Drop leg with spring return increases overall extension for maximum adjustability Plunger pin positioned to the front Durable 1" jack screw allows for heavy lifting Twin thrust bearings make extending and retracting jack easy Effortless greasing with built-in grease zerk Black powder coated finish on inner and outer tubes Sidewind handle has curved edges - no sharp ends Footplate minimizes sinking in soft ground Weld-on installation Specs: Height (from bottom of foot to top of jack): 27-1/8" Retracted 41-7/8" Extended Total lift: 28-3/4" Screw travel: 15" Drop leg travel: 13-3/4" Lift capacity: 12,000 lbs Support capacity: 15,000 lbs Outer tube width: 4-5/16" Inner tube width: 4" Footplate dimensions: 9" long x 9" wide Adjustment hole spacing on drop leg: 3-3/8" from center of hole to center of hole 1-Year warranty
Heavy-duty 25K capacity, 2-speed jack is perfect for any demanding job that requires a gooseneck trailer. Retracted height is 8-1/4" and extended height is 18", plus 8" of drop leg travel using the plunger pin.Features: Industrial-sized jack lets you raise and lower your gooseneck trailer Ideal for demanding agricultural, construction, and industrial work Companion square jack (TJD-25100) and cross shaft sold separately Standard 2-Speed gear design Drop leg with spring return increases overall extension for maximum adjustability Side-positioned plunger is easier to align than a pin and clip (and you won't pinch your fingers) Hands-free spring return lets you retract the leg using your foot Round footplate minimizes sinking in soft ground Easy maintenance Built-in grease zerks Strong, stable, durable, industrial-sized tubing Black painted inner and outer tubes Includes sidewind handle Weld on installation Specs: 2-Speed gear: High gear: 1" every 4-1/2 turns Low gear: 1" every 34-1/2 turns Height (from bottom of foot to top of jack): Retracted: 30" Extended: 43" Height (from bottom of footplate to bottom of outer tube): Retracted: 5" Extended: 18" Travel: 13" Drop leg travel: 11-1/2" 1-1/2" Plunger pin hole diameter Adjustment hole spacing: 4" from center of hole to center of hole Outer tube width: 4-3/8" Inner tube width: 4" Rod shaft diameter: 1" Outer tube length: 25" Footplate diameter: 9-7/8" Lift capacity: 25,000 lbs 1-Year warranty
Pull the front-facing plunger pin on this jack to release the drop leg for 13-3/4" of lift on top of the 15" of screw travel. Durable screw offers increased strength. ... Features: Heavy-duty utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Drop leg with spring return increases overall extension for maximum adjustability Plunger pin positioned to the front Durable 1" jack screw allows for heavy lifting Twin thrust bearings make extending and retracting jack easy Effortless greasing with built-in grease zerk Black painted inner and outer tubes Sidewind handle (TJD-12000-HD) sold separately Handle can be secured for travel with weld-on clip (TJD-12000-CLIP - sold separately) Footplate minimizes sinking in soft ground Weld-on installation Specs: Lift capacity: 12,000 lbs Support capacity : 15,000 lbs Total travel: 28-3/4" Screw travel : 15" Drop leg travel : 13-3/4" Overall height: 27-1/8" Retracted 41-7/8" Extended Outer tube width: 4-5/16" Inner tube width: 4" Footplate dimensions: 9" long x 9" wide Adjustment hole spacing on drop leg: 3-3/8" on center Jack screw diameter: 1" 1-Year warranty
Filters
